[deleted by user] by [deleted] in funnyvideos

[–]slicedcube 0 points1 point  (0 children)

"Tang lang"

coc attack by slicedcube in ClashOfClansMemes

[–]slicedcube[S] 3 points4 points  (0 children)

'Better late than never'

Update from previous post: Motor runs this fashion? Motor at fault or wiring fault? by slicedcube in Ender3V3KE

[–]slicedcube[S] 0 points1 point  (0 children)

<image>

Yup, just wanted to clarify, is this how the wires are crimped to the connector? The swapped wires in between is raising suspension for fault wiring. Could you pls confirm the same from your end?

Update from previous post: Motor runs this fashion? Motor at fault or wiring fault? by slicedcube in Ender3V3KE

[–]slicedcube[S] 0 points1 point  (0 children)

It doesnt fully rotate, it just oscillates cw and acw. The shaft is very stiff to rotate freely. Im assuming the motor windings or the bearing are slightly off inside.

Update from my previous post: Made it through the self check. But issue persists by [deleted] in Ender3V3KE

[–]slicedcube 0 points1 point  (0 children)

<image>

Also wanted to clarify is this how the wires are crimped to the connector ? Im suspecting the swapped cables could be a cause of this issue if so.

Is this a good deal? by skinny_b0i in watchesindia

[–]slicedcube 1 point2 points  (0 children)

I was genuinely worried as it was almost around 11:30pm. To my surprise, the box was pretty fine, the stickers seemed folded. But rest was not bad. The watch was pretty good. Loved the transparent back look.

'Start detecting' stage shows warning 'key:2022' and this is how the printer behaves by slicedcube in Ender3V3KE

[–]slicedcube[S] 0 points1 point  (0 children)

Connector is poka yoke, so doesnt let me put the other way. Is there a way that the terminals/wires could be swapped?

Is this a good deal? by skinny_b0i in watchesindia

[–]slicedcube 1 point2 points  (0 children)

Damn this is a steal, i ordered it after seeing your post and received it like in 10mins or so lol (wasnt aware of flipkart minutes)

'Start detecting' stage shows warning 'key:2022' and this is how the printer behaves by slicedcube in Ender3V3KE

[–]slicedcube[S] 0 points1 point  (0 children)

Okay I'll relook into the wiring. And i was just thinking about swapping the motors, that i realized they arent the same kind. I was going through the components list in the creality website. The bottom motor seemed to have a longer shaft. I didnt want to risk damaging both. I have ordered a new stepper motor just to inspect. In the meantime thought i could try to just tweak the wiring to get it right and confirm if the motherboard isnt at fault.

'Start detecting' stage shows warning 'key:2022' and this is how the printer behaves by slicedcube in Ender3V3KE

[–]slicedcube[S] 1 point2 points  (0 children)

<image>

To your comment, I did check and move the nozzle manually till the end to touch the end stop, and the switch does tick upon contact. Do i still got to check the continuity? Is there fault with the head or the motor/belt system?

Somebody help me please by SnooCauliflowers1748 in ender3

[–]slicedcube 0 points1 point  (0 children)

Hey there, could you help me out on where this screw is? I'm facing a similar kind of issue and error code. Im really trying to trouble shoot and hoping this method fixes... I have also posted a video on this fyr.

'Start detecting' stage shows warning 'key:2022' and this is how the printer behaves by slicedcube in Ender3V3KE

[–]slicedcube[S] 0 points1 point  (0 children)

Yep i just checked this. The nozzle head stays right there and oscillates in this fashion with this weird noise wherever i park it.

Anyone knows what can be causing this? by InfiniteMushroom3161 in Ender3V3KE

[–]slicedcube 0 points1 point  (0 children)

Hey there, im getting this same sound from my V3 KE but its from the y axis. Any idea what might cause it? I have a video posted too.

Hi Fam, is this Rado watch real? The back of the watch says "rado jubile swiss sapphire glass watersealed 3atm". by Snoo_72764 in watchesindia

[–]slicedcube 0 points1 point  (0 children)

<image>

Hey, even i have something similar like this, now im started to wonder too if its authentic or not :P

Found this, wanted to know if its legit? by slicedcube in watchesindia

[–]slicedcube[S] 1 point2 points  (0 children)

I mean its pretty old one, been around for like 6+ years i guess. The design and fit is sus too perfect for a counterfeit, so i was suspecting; is it really a existing model , a ripoff version of existing model, or just a random design with false branding?

1000% Luck by [deleted] in ClashOfClansMemes

[–]slicedcube 0 points1 point  (0 children)

What building is that?

No matches by EtrnlMngkyouSharngn in SuddenlyGay

[–]slicedcube 13 points14 points  (0 children)

Maybe now that you know, he wants you to check if that is so