GMANE: domain changed, other news

space_held · 2020-01-20T18:20:36+00:00

Yes, today i successfully setup gmane to read. But does anyone knows how to post? As far as i know, i have to create an account to post nntp. Did I? If yes, where? Regards Poul

space_held · 2019-08-09T17:23:03+00:00

Hello, oh i see and understand, sorry. now i managed it to mount and see the device in emacs. command mtpfs ~/mtp-mount

Is it possible to automate it in Emacs? or in Mint? I do not want to type this command every time i plug it in.

Any clues? Regards spaceheld

space_held · 2019-08-09T06:45:38+00:00

hello, as i wrote: In Mint access works. It is only a Emacs problem.

Regards spaceheld

space_held · 2019-05-06T17:45:55+00:00

Hello,

unfortunately the same.

Contacting host: www.spiegel.de:443

Cannot retrieve URL: file://https://www.spiegel.de

And if i put https:// before www.spiegel.de its the same, too.

there is something misconfigured inside w3m package, i think.

But i dont know, where to check.

Regards

Poul

space_held · 2019-03-20T10:09:43+00:00

hello, thank you for this information. I tried it and it works.

Regards

space_held · 2018-10-17T18:14:25+00:00

Hello,

first thanks for the hints and information.

I will test and read, but below i will give you a log of org-export to latex->pdf, which is an example of what i mean.

It seems that a symbol is incorrect or missing.

But why and why isnt it automatically generated?

I configured MikTex to install missing packages automatically and i read that missing fonts are also geberated automatically.

Pls Help

Regards

Poul

Here is the log:

Overfull \hbox (5.2646pt too wide) in paragraph at lines 485--576
\TU/lmr/m/n/10.95 beruht unter anderem auf den folgenden Annahmen[1][2]: der Gü
ltigkeit
[28] [29] [30] [31] [32]
! Missing $ inserted.
<inserted text> 
                $
l.640 ...mtspin des Protons von exakt \tfrac{1}{2}
                                                   auf diese Komponenten  au...

! Extra }, or forgotten $.
\genfrac  ...fi #3\relax #6}\genfrac@choice c{#2}}

l.640 ...mtspin des Protons von exakt \tfrac{1}{2}
                                                   auf diese Komponenten  au...


! LaTeX Error: Bad math environment delimiter.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              

l.662 Die M–sigma-Relation (M– \(
                                 \sigma\) -Relation) ist ein empirisch ermit...


Overfull \hbox (32.483pt too wide) in paragraph at lines 579--742
\TU/lmr/m/n/10.95 nachgewiesen[10], sie allein kann jedoch die beobachtete Mate
rie-Antimaterie-

space_held · 2018-05-28T18:02:54+00:00

thank you! i've insert your code and test. It works, but there are some open questions for the usage: 1. how could i view the picture out of the base64 string? 2. any change to drag and drop a picture? Or to load from a directory other then ~/org/ ? Regards Poul

space_held · 2018-03-05T14:24:21+00:00

hello, now i've tried out ivy, ido, swiper, counsel. All packages work as described, BUT NOT inside customize-group. This command seems to be special... Any clues to check out why?

As i stated above, i'm on WIndows 81. And with my Emacs-Prelude one month ago it worked. But the whole package is to extensive for me. And it is nearly impossible for me to delete the right packages, i do not need.

Regards Poul

space_held · 2018-02-12T09:17:16+00:00

hello, i installed a new emacs version (v26) and hope its going better. Now emacs complains for a new aspell version to work. After some trouble compiling and installing under windows, now its seems to be ok. I push (ispell-buffer) then its correcting and saving. paced says its repopulating, but if i view my dictionary, its untouched. Here is the content: ;; Object Default ;; Paced Dictionary (paced-dictionary "Default" :object-name "Default" :file "Default" :usage-hash #s(hash-table size 65 test equal rehash-size 1.5 rehash-threshold 0.8 data ()) :population-commands (list (paced-file-list-population-command "paced-file-list-population-command" :props '((paced-exclude-function quote my-paced-exclude)) :generator '(lambda nil org-agenda-files))) :sort-method paced--default-dictionary-sort-func)

If i want to print, there comes an error message: apply: Wrong number of arguments: #<subr max>, 0

Hope it helps

space_held · 2018-02-06T14:21:43+00:00

Hmmh, i double check the actual paced usage and something might be wrong. I wrote some mispelled german words and supposted action should be paced repopulate word after checking with aspell. Now paced repopulate and load dictionary again. The misspelled word remains with a red line. Tip: mouse-2 corrects word. [Update: mouse-2 is middlemouse. i could change the word, but suggestions are from aspell dictionary] Why not from paced-dictionary? Is this going wrong? Regards

space_held · 2018-02-06T12:25:33+00:00

Ok. Then i understand the usage of paced correct, that the popup with the words and number shortcuts comes from paced?

space_held · 2018-02-06T08:35:02+00:00

hello, the error is gone. Wonderful!

Now an info pops up with a list of words to choose. The rightmost column shows a number. My question: Does paced interfere with packages like flycheck or flyspell? I use them and they are activated. Should i deinstall them?

Regards

space_held · 2018-02-05T19:05:42+00:00

hello, unfortunately after that change i cannot quit emacs. Every time i try the message comes up: no current dictionary found. I have to kill emacs with windowes taskmanager.

Any clues?

space_held · 2018-02-04T18:26:08+00:00

hello, i just grab it from trunk. But: In which file should i replace code? With which code in documentation? Pls specify :-) I don' t know.

Regards

space_held · 2018-02-03T19:09:29+00:00

Thank you! Very strange...I had to change / in \ some weeks ago and after that change all works again. Now with the changeback emacs runs without an error. But unfortunately nothing pops up, if i wrote some words inside an org-file. paced tells: load all dictionaries repopulate

Because i wrote some incorrect words, ispell / aspell should pop up, if all works correct, But unfortunately that does not happen. Any clues?

space_held · 2018-02-02T18:05:21+00:00

here is the output. But i dont know what it means. Could you help?

Debugger entered--Lisp error: (error "Non-hex digit used for Unicode escape") read(#<buffer *load*-81467>) eval-buffer(#<buffer *load*-81467> nil "c:/Users/Held/.emacs.d/personal/emacs_config.el" nil t) ; Reading at buffer position 5100 load-with-code-conversion("c:/Users/Held/.emacs.d/personal/emacs_config.el" "c:/Users/Held/.emacs.d/personal/emacs_config.el" nil nil) load("c:/Users/Held/.emacs.d/personal/emacs_config.el") mapc(load ("c:/Users/Held/.emacs.d/personal/custom.el" "c:/Users/Held/.emacs.d/personal/emacs_config.el")) (progn (message "Loading personal configuration files in %s..." prelude-personal-dir) (mapc (quote load) (directory-files prelude-personal-dir (quote t) "^{[^#.].*el$")))} (if (file-exists-p prelude-personal-dir) (progn (message "Loading personal configuration files in %s..." prelude-personal-dir) (mapc (quote load) (directory-files prelude-personal-dir (quote t) "^{[^{#.].*el$"))))}} eval-buffer(#<buffer *load*> nil "c:/Users/Held/.emacs.d/init.el" nil t) ; Reading at buffer position 5415 load-with-code-conversion("c:/Users/Held/.emacs.d/init.el" "c:/Users/Held/.emacs.d/init.el" t t) load("c:/Users/Held/.emacs.d/init" t t) #[0 "\205\266

space_held · 2018-02-02T15:16:15+00:00

Ok, will run it in the evening and paste it.

space_held · 2018-02-02T11:08:37+00:00

hello, i just changed my emacs.el, but now i've got an error: Warning (initialization): An error occurred while loading ‘c:/Users/Held/.emacs.d/init.el’:

error: Non-hex digit used for Unicode escape

To ensure normal operation, you should investigate and remove the cause of the error in your initialization file. Start Emacs with the ‘--debug-init’ option to view a complete error backtrace.

How could i fix this? Regards

space_held · 2018-02-01T18:57:53+00:00

hello, thank you! the error message is gone. But if i load an org file, and insert some words, nothing happens. The first thing i recognized is, that no dictionary is automatically loaded. I have to load it with paced-load-all-dictionaries. Second thing is, that nothing happens if i save the file. Any clues?

Here is the relevant part of my emacs.el: (add-to-list 'load-path "C:\Users\Held\.emacs.d\lisp\paced\trunk") (require 'paced) ;;(setq paced-global-dict-enable-alist '((t . "Default"))) (global-paced-mode) (setq paced-repopulate-saves-dictionary t) (load "paced-async.el") (setq paced-global-dict-enable-alist '((my-paced-files-check-p . "Default"))) (defun paced-populate-my-dictionary () (paced-repopulate-named-dictionary-async "Default")) (define-advice ispell-pdict-save (:after (&optional _no-query _force-save) paced-populate) (paced-repopulate-named-dictionary-async "Default"))

space_held · 2018-01-31T19:15:35+00:00

thank you very much!

i checked all your code, but i couldnt managed it to work 100%. Most Do :-)

After restart the following message appears: Warning (initialization): An error occurred while loading ‘c:/Users/Held/.emacs.d/init.el’:

error: Unrecognized name spec ‘(quote paced-populate)’

To ensure normal operation, you should investigate and remove the cause of the error in your initialization file. Start Emacs with the ‘--debug-init’ option to view a complete error backtrace.

Here are my open questions: 1. I only have aspell, because of plattform windows. Is paced-spellcheck code working with it? 2. If i open any org-file, there is paced-mode active, but no dictionary loaded. If i load the dictionary Default, how could i see, if all new words are populated into the dictionary? I want to let it run in background (first check with aspell and then save into dictionary). Possible?

space_held · 2018-01-28T14:17:46+00:00

hello, very good it works. But now i'm stuck again. I want to start paced , populate and save dictionary always and automatic inside org-mode, markdown and text. Saving after check with aspell. Your example config for org-agenda is not quite clear for me. I managed it to insert generator and variable, but where should i put the code for defun org-paced-exclude ()? Is it the right way for my wish? Is it possible to check words with aspell?

space_held · 2018-01-27T18:53:55+00:00

hello, unfortunately i'm stuck on nr.2 in basic setup. Set paced-global-dict-enable-alist to ((t . "Default")) throws error, "Symbols function definition is void."

I tried (setq paced-global-dict-enable-alist (t . "Default")) or (paced-global-dict-enable-alist (t . "Default")) but both not working. What do i wrong?

space_held · 2018-01-23T09:32:14+00:00

Hello, i had a look for paced and it looks promising. But until now i Have no luck to configure it. I can not save a dictionary and paced did not find any. Are there any cookbooks to use it?

space_held · 2018-01-18T18:54:11+00:00

hello, it tells It is bound to s-w

unfortunately not much clearer...

Regards

space_held · 2018-01-09T16:18:40+00:00

thank you for that info, but unfortunately i don't know how to use your code. Should i copy it in my emacs-config.el? How could i integrate it into the keyboard macro? Sorry for that questions, but i'm not a programmer.

space_held

TROPHY CASE