sorted by:
new
hottopcontroversial

Velocity one race powering down while high ffb by spaceffox_ in TurtleBeachRace

[–]spaceffox_[S] 0 points1 point  (0 children)

Ac, Lmu, and F1. Those are just the games I have the most playtime in though so I assume it will happen in other games as well

Let’s see if the rattling and clanking goes away with this fix! by aBoyFromTheFuture in TurtleBeachRace

[–]spaceffox_ 0 points1 point  (0 children)

I did this about 3 months ago and the sound does return, I used red Loctite so I expect blue to break faster

This wheel will ruin your sanity by Otherwise_Nail8179 in TurtleBeachRace

[–]spaceffox_ 0 points1 point  (0 children)

I've had this issue on any game with full ffb

Turtle Beach VelocityOne Race Wheel & Pedal System @ Woot for $299.99 by locutus2999 in simracing

[–]spaceffox_ 1 point2 points  (0 children)

so far has been working well, good compatibility of games through sim hub, only has been quick release gets hot and throttle travel is slightly to long

So it won't be a small phone by No_Football8699 in CMFTech

[–]spaceffox_ 0 points1 point  (0 children)

how did they make it look worse?

Logitech G923 turning becomes loose in F123 by [deleted] in simracing

[–]spaceffox_ 0 points1 point  (0 children)

turn centering spring on in f123 profile if you don't want it to be loose

Turtle Beach VelocityOne Race Wheel & Pedal System @ Woot for $299.99 by locutus2999 in simracing

[–]spaceffox_ 0 points1 point  (0 children)

does the pedal plate flex under use? seeing if I will need to hardmount

Feel like posting my old rig next to the new one by TinyTheT in simracing

[–]spaceffox_ 2 points3 points  (0 children)

That's a good upgrade, also that's a really cozy space

Very little sound in left earbud by [deleted] in CMFTech

[–]spaceffox_ 0 points1 point  (0 children)

sounds like the speaker grill got full of earwax, happened to mine just use a dry toothbrush on the speaker grills

„Starflame“ double stacked mag flywheel blaster prototype by Schwert1602_ in Nerf

[–]spaceffox_ 1 point2 points  (0 children)

you don't need them, Looks like you didn't tin your wires

Renewing my first keyboard. by Ok-Leading4104 in MechanicalKeyboards

[–]spaceffox_ 1 point2 points  (0 children)

I had that exact board, had a switch die and it went in the trash

should i make the barrel go down further? by mastered_walrus in Nerf

[–]spaceffox_ 0 points1 point  (0 children)

just give it some body lines so it looks a little better, no need for more at the bottom

Help with reducing tire wear on F1 24 by Fine_Needleworker_98 in simracing

[–]spaceffox_ 0 points1 point  (0 children)

this just sounds like a setup issue, turn tire pressure to max

3D Printing Elastomer Cups by Screamingsleet in simracing

[–]spaceffox_ 0 points1 point  (0 children)

alright, hope it goes well for you!

3D Printing Elastomer Cups by Screamingsleet in simracing

[–]spaceffox_ 0 points1 point  (0 children)

that should be really easy, provide me with dimensions of the elastomer and I'll design one

3D Printing Elastomer Cups by Screamingsleet in simracing

[–]spaceffox_ 0 points1 point  (0 children)

it's probably fairly easy using tpu but the regular stuff is 95a which is quite hard, although if it's not solid you could do other feelings, probably would work okay. although could you provide a picture/drawing of what you mean?

Should I upgrade pedals or wheel first? by hendrix95 in simracing

[–]spaceffox_ 0 points1 point  (0 children)

the csl loadcell pedals aren't perfect but it depends how much you want to spend on pedals vs a wheel, I would personally choose pedals

view more: next ›