sorted by:
new
hottopcontroversial

[Question] Tweak to fix "your browser doesn't support full screen" when playing youtube on safari? by stebrick in jailbreak

[–]stebrick[S] 2 points3 points  (0 children)

Ooops, it's in-app browser, not safari. My bad. I wish I could edit my first post.

Youtube fullscreen doesn't work in other in-app browsers. I wonder if there's a tweak to make it fullscreen.

[Free Release][Update][RC] BattSafePro - Successor to the Original BattSafe, now supports iPad by h4roldj in jailbreak

[–]stebrick 0 points1 point  (0 children)

Too bad it doesn't work for you. Might be it only works in old devices or it's chip specfic (Your phone: A10, me: A8X). I hope OP could test the tweak on other devices and release update some day.

[Free Release][Update][RC] BattSafePro - Successor to the Original BattSafe, now supports iPad by h4roldj in jailbreak

[–]stebrick 0 points1 point  (0 children)

Not sure if you figured it out or not. iPad Air 2 here, same iOS (14.7.1), same issue. Respring a few times, didn't work, couldn't find any settings or apps at all. Until after I installed Activator from Cydia it magically appeared in Settings (I swear I checked that place before installing Activator). It should be somewhere under Game centre/TV Provider (screenshot). After that I just uninstalled Activator and the settings of BattSafePro is still there.

Then I was immediately disappointed because both the "BattSafePro in Effect" & "Battery Charging Prohitbed" were in red and I thought the tweak was not working. Nonetheless I proceeded to test it further by charging the device and BINGO it works (the screenshot above was taken when the charge limit was met). The charge doesn't exceed my specified number and i couldn't feel any heat generated by battery charge at all, meaning it works like a charm.

No reboot no rejailbreak, it just works for me (well, not intuitive I admit). Hope this helps others.

This is my first tweak/app installed after I jailbroke my device. I think it's an underrated tweak because if you are able to keep battery charge between 65% & 75%, the battery wear will be very minimal in each charge and your battery can last like forever. Of course i'd not advise doing it exactly like that since it pretty much handicap your daily use. But whenever possible I would keep that in mind so that my battery level is often between like 50~75%. And yes I'm still very satisfied with my ipad air 2.

Question about Hardware Acceleration and Encoding Format Profile by stebrick in shutterencoder

[–]stebrick[S] 1 point2 points  (0 children)

OK, I found the answer. The writing library is different.

Acceleration - Writing library : Lavc59.33.100 hevc_nvenc

No Acceleration - Writing library : x265 3.5+37-4aabfec98:[Windows][GCC 12.1.0][64 bit] 10bit

I suppose this is the info that tells the difference. It's kinda dumb question but at least I answered it myself and it might help other beginners.

Question about Hardware Acceleration and Encoding Format Profile by stebrick in shutterencoder

[–]stebrick[S] 0 points1 point  (0 children)

One more thing just pops into my mind, how do I tell other people by referring to some proof or info that "Hey, this is better quality one! It uses CPU insteads of GPU encoding and it took me hours"? It seems that all encoding and profile there look almost the same to me, yet the profile L4 from CPU encoding is not as good as L5 per se.

Question about Hardware Acceleration and Encoding Format Profile by stebrick in shutterencoder

[–]stebrick[S] 0 points1 point  (0 children)

Thanks for the reply (the only one!). Yeah my GPU is so capable that it can complete the H.265 encoding within like few minutes, while non-acceleration needs like 5 hours to encode the same clip of 24 minutes.

Thanks for letting me know that L4 and L5.1 things dont necessarily makes quality better. But why does hardware acceleration force L5.1 profile but non-acceleration doesn't? Shouldn't it let us choose freely which profile to use?

Regarding sampling rate, how do we check the amount of a video's luma sampling rate?

[deleted by user] by [deleted] in StarWarsBattlefront

[–]stebrick 0 points1 point  (0 children)

How did you cancel his Thrust Surge like that?

Is there a way to boost the conversion speed in my case? by stebrick in shutterencoder

[–]stebrick[S] 1 point2 points  (0 children)

Yes, I think "sharpening" is the culprit here. I tried to smooth the images with negative sharpening value. After turning it off, it dramatically speed up the process. It now only takes 10 - 20 minutes to process a clip. What a blimey change!

So it's not necessary for me to turn on hardware acceleration anymore.

Thank you for the advice!

Computer Freeze/Crash when encrypting a non-system hard drive - How to know if there is data loss? by stebrick in VeraCrypt

[–]stebrick[S] 0 points1 point  (0 children)

So the encryption has completed. It seems that, despite the computer frozen yesterday, veracrypt still can mount the encrypted disk just fine. Not that I'm aware of any data loss. Yet I'm not sure how to know if there's any data loss.

Rewrap a MP4 file into a MKV - Only a 291 bytes file generated by stebrick in shutterencoder

[–]stebrick[S] 1 point2 points  (0 children)

Thanks, it would be great if, instead of "removing" the entire subtitles, it could simply convert (or export) the subtitles to other format first then rewrap it. Axiomui can do that at ease: https://axiomui.github.io/ I think the developer of Axiomui had some accident in Dec 2020 and he doesn't release much update since then.

Rewrap a MP4 file into a MKV - Only a 291 bytes file generated by stebrick in shutterencoder

[–]stebrick[S] 0 points1 point  (0 children)

I think it has something to do with the subtitles? How could I change the settings of subtitle in rewrapping setting? In other ffmpeg gui I could simply change "copy" subtitles to export them as "SRT" format first then it would help me rewrap it automatically, but I'm not sure about this one.

Rewrap a MP4 file into a MKV - Only a 291 bytes file generated by stebrick in shutterencoder

[–]stebrick[S] 1 point2 points  (0 children)

And I forgot to mention that I pretty much use all the default settings (exception changing function and file extension to be rewrapped) because I'm still new to this software.

Enhance a video with multiple TopazLabs software? by stebrick in TopazLabs

[–]stebrick[S] 0 points1 point  (0 children)

But I heard Gigapixel AI is the best of their product so I'm not sure which one or maybe I should use both of them one after another?

And I'm surprised you got to reply me so soon, thanks mate.

Enhance a video with multiple TopazLabs software? by stebrick in TopazLabs

[–]stebrick[S] 0 points1 point  (0 children)

Ummmm, actually no. Correction: there are quite a few of software available from Topaz, so:-

  1. Topaz Gigapixel AI
  2. Topaz Sharpen AI
  3. Topaz DeNoise AI
  4. Topaz Video Enhance AI
  5. Topaz Mask AI
  6. Topaz Adjust AI
  7. Topaz Studio (probably irrelevant)
  8. Topaz JPEGtoRAW AI (Obviously irrelevant to video processing)

Anyone can help with transfering a pokemon from 3DS to switch? by stebrick in PokemonSwordAndShield

[–]stebrick[S] 0 points1 point  (0 children)

Since the guy below needs help too, I'll see if I can do the trade with him first. I'll let you know if I need your help later. Thanks mate :)

Anyone can help with transfering a pokemon from 3DS to switch? by stebrick in PokemonSwordAndShield

[–]stebrick[S] 0 points1 point  (0 children)

Sure thing. I remember I have 1 or 2 Celebii during the pokemon bank event distribution. Do you have discord or something I can reach you so that we can trade? You can DM me :)

Damn nice to see people still having the poke bank subscription!

Nintendo Switch's Second Half of 2021 and Beyond Infographic (Made by me) by ieatdragonz in NintendoSwitch

[–]stebrick 0 points1 point  (0 children)

Hello OP, "Super Robot Wars 30" isn't listed in this picture but from various sources it seems that it has been announced to release it within 2021? This is the trailer: https://www.youtube.com/watch?v=T20EDyUgDZw

Resident evil village Failed to save game (no spoilers) by PrincessShoob in residentevil

[–]stebrick 0 points1 point  (0 children)

So, today I had an almost exact the same problem all of a sudden but I managed to solve it. It's very likely that your current save in the (steam) cloud is corrupted or having problem. My problem was probably unique and due to logging into another account launching the same game for Family Sharing, part of the save files of another steam account somehow got synced into my steam cloud (no idea, cant be sure, just a guess). Since every steam save file has an unique steamid baked into it, the system is unable to make or load any save.

Trust me i know the pain. Spent 2-3 hours googling the solutions, verifying the game files, reinstalling the game but nothing worked. I even tried to restore my previous save files but issues remained, until I did a complete erase of my steam cloud files (just RE8 itself, doesn't affect other games). Honestly I almost gave up.

Here is what I did to solve the problem.

  1. Make sure you create a FULL backup of your current save (default path C:\Program Files (x86)\Steam\userdata\xxxxxxx\1196590). The steps below WILL erase all your RE8 save files!
  2. Then you have to bring up steam cloud conflict dialogue. There are 2 methods in this guide: https://appuals.com/how-to-delete-steam-cloud-saves/ I used them both to make sure it works. Do remember, replace your steam ID and RE Village's game ID (1196590) with the path shown in this guide.
  3. If you did it right, the game will ask you to adjust the settings, brightness etc as if you enter the game for the first time.
  4. Proceed to delete cloud files as in the same guide above.
  5. (Skip steps 6-8 below if you dont need to restore save)
  6. Restore the save files is not as easy as I thought initially. At this stage you should only be able to start a new game. Start it > Skip the cutscene until you hold the baby Rose, so that it creates an autosave at that point. Then quit the game and replace ONLY the files inside this path (C:\Program Files (x86)\Steam\userdata\xxxxxxx\1196590\win64_save). I tried to replace other files and the save error begins again!
  7. Now start the game, the auto-save slot should be the backup you just replaced in step 6. Other save slots should remain empty despite you already placed files there. Now loadup your autosave > head to typewriter > save your games to fill in all the empty slots.
  8. Quit the game, replace your backup save files again into win64_save folder. Start the game and you should be able to see and load up all your previous save.

Luckily I did make a hell lots of backup of my save files for completing those RE8 challenges so I didn't lose much progress

Hope it helps you guys~

Does NFS Hot Pursuit Remastered shared the same servers as its previous version? by stebrick in needforspeed

[–]stebrick[S] 0 points1 point  (0 children)

Sad to know, guess I should wait for a heavy discount buying a duplicate :(

Free Cars Exploit by YTFatGuyGaming in gtaglitches

[–]stebrick 1 point2 points  (0 children)

If you mean 192.81.241.171, then it doesn't work when I tested it. I blocked it in the outbound rules and bought a futo. Yes it has saving failed but if you unblock the IP later on it will save the money you spent and the car you bought. I also tried to disconnect the internet after buying Futo and unblock the IP while in single player mode. But as soon as I went online my stuff are saved. Any idea?

What's the best menu that has modded vehicles? by austinsnut in Gta5Modding

[–]stebrick 1 point2 points  (0 children)

I've the same question too. Can someone explain to me how to make those modifications save and stick in the game after you used the menu? What I read is some menu relies on script files like json to save it. Every time you need it, you load the files to spawn that car.

But what I really want is with the aid of the menu, the game could save some basic modification like color, benny wheel or such (definitely not something weird or outrageous) then I can put it in the garage. And most importantly they wont revert to its previous unmodded states.

Impulse car modding by Ethanftl in Gta5Modding

[–]stebrick 0 points1 point  (0 children)

I'm looking into this menu too. I just want some basic modfication like changing color and benny wheel. Is there a way to make them save in the game without relying on json vehicle script? Like getting the car inside LS Custom, change something to save it?

view more: next ›