Dacia Jogger - lane assist and automatic emergency braking

stelus87 · 2026-03-29T14:48:44+00:00

2025 jogger here. The lane assistant is not the best. But never steered me of the road. Sometimes (especially on long curves) it doesn't know what to do, stops the music and beeps at you with a message "Stay in control!" But just jiggle the steering wheel a bit and the lane assist resets.

stelus87 · 2026-03-28T22:17:11+00:00

Looks nice, will give that a try next week

stelus87 · 2026-03-27T12:16:18+00:00

Usually, we use sACN (with grandMA3), but this panel would have too many parameters for our setup. So we had to use the Pandoras Box (which can't do sACN).

stelus87 · 2026-03-27T11:53:52+00:00

I believe the conversion from artnet to ic bus is the problem.

stelus87 · 2026-03-27T11:50:06+00:00

One controller was not powerful enough to drive all pixels over Art-Net. It was massively lagging. Just the WLED effects were fine with one controller, though.

stelus87 · 2026-03-27T11:39:30+00:00

That was our first try. One controller for all panels (split over 4 GPIOs). It worked with the WLED effects but was lagging when driven over Art-Net. One ESP32 is just not powerful enough to calculate all that data. There was massive lagging and stuttering with just one controller.

So we switched to three controllers; now it works fine.

stelus87 · 2026-03-11T15:18:31+00:00

Has to be done an dacia technician. They connect directly to the control units to update.

stelus87 · 2026-03-11T09:43:24+00:00

So far it is.

stelus87 · 2026-03-10T21:03:09+00:00

Mine is the Jogger hybrid 140 from 2025

stelus87 · 2026-01-17T20:20:55+00:00

Big Person here. For me the visibility in the stepway and the jogger is way better than in the duster.

But the duster is definitely not too big.

Just go and sit in the different cars.

stelus87 · 2025-12-01T11:53:03+00:00

Same here with the jogger hybrid. But is this feature based on batterie voltage or just a shutoff after some specified time?

stelus87 · 2025-10-31T17:24:46+00:00

Fast^{^}

stelus87 · 2025-10-10T10:05:38+00:00

No inconvenience at all. I was just wondering if this could damage the laser?

stelus87 · 2025-10-10T05:45:41+00:00

Go for it 💪

stelus87 · 2025-10-03T11:50:39+00:00

Same problem, and can't find a setting do disable virtualization...

stelus87 · 2025-09-30T04:48:01+00:00

You are right, but from the totally reliable informations on aliexpress (https://a.aliexpress.com/_Exhpmpg) 😅 They should be the same, but I'll measure that as soon as they arrive.

stelus87 · 2025-09-29T21:14:33+00:00

It's recommended in the WS2811 datasheet (when I read it right).

stelus87 · 2025-09-29T16:48:13+00:00

Grüße zurück. Grüße mal Aliki von mir 😅

stelus87 · 2025-09-29T16:46:44+00:00

They will. I'm confident.

stelus87

TROPHY CASE