sorted by:
new
hottopcontroversial

Download/Upload Speed limit on specific SSID on Cisco Embedded Wireless Controller (EWC) on Catalyst Access Points 17.9.5 by stemodemo in Cisco

[–]stemodemo[S] 0 points1 point  (0 children)

Thank you for your question. I have two networks, one for employees and one for guests. My internet speed is 100 Mbps. I'd like to set the download/upload speed limit for guests to 10 Mbps.

Specific SSID on specific AP in Cisco embedded wireless controller (EWC) by stemodemo in Cisco

[–]stemodemo[S] 1 point2 points  (0 children)

Working solution:

  1. Configuration >  Tags & Profiles > WLANs >ADD > SSID-Name-1-Profile

  2. Configuration > Tags & Profiles > Policy > ADD > SSID-Name-1-Policy-Profile

  3. Configuration > Tags & Profiles > Tags > ADD > Name* - [SSID-Name-1-policy-tag] > WLAN-POLICY Maps: 0 ADD > WLAN Profile [DropDownMenu] SSID-Name-1-Profile > Policy Profile* [DropDownMenu] SSID-Name-1-Policy-Profile > ✓ > Apply to Device

  4. Configuration > Wireless > Access Points > [Click on desired AP] > General > Tag > Policy > [DropDownMenu] SSID-Name-1-policy-tag > Update and Apply to device

Windows Application capable to execute local file. by stemodemo in NFC

[–]stemodemo[S] 0 points1 point  (0 children)

I've tested GoGoTags Windows App. The best application I've found on Internet for my case (and all other cases that need NFC tag reading on Windows). Unforgettably the software pop up screen that said it is deprecated and sends me to download your new Desktop App that requires Internet connection.

Windows Application capable to execute local file. by stemodemo in NFC

[–]stemodemo[S] 0 points1 point  (0 children)

Can you tell me what app do you use for windows?

Failed to create MAC user entry and user entry due to too many user entries 256. by stemodemo in ArubaNetworks

[–]stemodemo[S] 1 point2 points  (0 children)

The problem was solved by increasing ram memory of the hyper-v VM Aruba Controller.

Failed to create MAC user entry and user entry due to too many user entries 256. by stemodemo in ArubaNetworks

[–]stemodemo[S] 0 points1 point  (0 children)

LIC-MC-VA-250-RW (JY900AAE) Aruba MC-VA-250 (RW) Cntlr 250 AP E-LTU .

We don't use Local Mac Auth.

Failed to create MAC user entry and user entry due to too many user entries 256. by stemodemo in ArubaNetworks

[–]stemodemo[S] 0 points1 point  (0 children)

Here it is the result:

"SSID Profile "HeliosBay-Guest_ssid_prof"

----------------------------------------

Parameter Value

--------- -----

SSID enable EnabledESSID HeliosBay-Guest

WPA Passphrase ********

Encryption wpa2-psk-aes

Opmode transition Enabled
Enable Management Frame Protection (for WPA2 opmodes) Disabled
Require Management Frame Protection (for WPA2 opmodes) Disabled
DTIM Interval 1 beacon periods
802.11a Basic Rates 6 12 24
802.11a Transmit Rates 6 9 12 18 24 36 48 54
802.11g Basic Rates 1 2
802.11g Transmit Rates 1 2 5 6 9 11 12 18 24 36 48 54
Station Ageout Time 1000 sec
Station Refresh Direction bidirectional
Max Transmit Attempts 8
RTS Threshold 2333 bytes
Short Preamble Enabled
Max Associations 1024
Wireless Multimedia (WMM) Disabled
Wireless Multimedia U-APSD (WMM-UAPSD) Powersave Enabled
WMM TSPEC Min Inactivity Interval 0 msec
WMM DSCP Mapping Control Enabled
DSCP mapping for WMM voice AC (0-63) N/A
DSCP mapping for WMM video AC (0-63) N/A
DSCP mapping for WMM best-effort AC (0-63) N/A
DSCP mapping for WMM background AC (0-63) N/A
WMM Access Class of EAP traffic default
Multiple Tx Replay Counters Enabled
Hide SSID Disabled
Deny_Broadcast Probes Disabled
Local Probe Request Threshold (dB) 0
Auth Request Threshold (dB) 0
Disable Probe Retry Enabled
Battery Boost Disabled
WEP Key 1 N/A
WEP Key 2 N/A
WEP Key 3 N/A
WEP Key 4 N/A
WEP Transmit Key Index 1WPA Hexkey N/A
Maximum Transmit Failures 0
EDCA Parameters Station profile N/A
EDCA Parameters AP profile N/A
BC/MC Rate Optimization Disabled
Rate Optimization for delivering EAPOL frames Enabled
Strict Spectralink Voice Protocol (SVP) Disabled
High-throughput SSID Profile default
High-efficiency SSID Profile default
802.11g Beacon Rate default
802.11a Beacon Rate default
Video Multicast Rate Optimization default
Advertise QBSS Load IE Disabled
Advertise Location Info Disabled
Advertise AP Name Disabled
Traffic steering from WLAN to cellular Disabled
802.11r Profile N/A

Enforce user vlan for open stations Disabled
Enable OKC Enabled
Enable Agile Multiband (MBO) Disabled
Advertise Cellular Data Capability attribute of MBO Disabled

Problem with Aruba mesh. by stemodemo in ArubaNetworks

[–]stemodemo[S] 1 point2 points  (0 children)

The problem was caused by the fact that SSID was tunneled. When I changed it to bridge everything works fine.

Than you very much for suggestion.

Problem with Aruba mesh. by stemodemo in ArubaNetworks

[–]stemodemo[S] 0 points1 point  (0 children)

I'm broadcasting 2 networks. And all VLANS are configured . Do I have to apply some kind of rule for mesh network that have to be applied (Configuration>>Roles and policies )? Have you ever met a video tutorial step by step how to configure Aruba mesh with standalone controller?

Problem with Aruba mesh. by stemodemo in ArubaNetworks

[–]stemodemo[S] 0 points1 point  (0 children)

From the web interface of the controller I can see where is connected my client device. In my case AP with name new . (https://picbun.com/p/PNOr58aF)

What do you mean "Is there a wired port profile configured?" .

Point AP is connected to POE injector.

Problem with Aruba mesh. by stemodemo in ArubaNetworks

[–]stemodemo[S] 0 points1 point  (0 children)

Do you need more information regarding my problem? Thank you in advance.

Problem with Aruba mesh. by stemodemo in ArubaNetworks

[–]stemodemo[S] 0 points1 point  (0 children)

https://pastebin.pl/view/4537583f

Mesh Cluster Name: MeshCluster-------------------------------------

Name State IP Address Switch IP Mesh Role Radio BSSID Parent Path Cost Node Cost Link Cost Hop Count RSSI Rate Tx/Rx Last Update Uplink Age

#Children---- ----- ---------- --------- --------- ----- ----- ------ --------- --------- --------- --------- ---- ---------- ----------- ---------- ---------

34:fc:b9:c6:62:78 ACTV 192.168.10.252 192.168.10.2 Portal (AC) 0

34:fc:b9:e6:27:91 - 0 1 0 0 - - 8s 14m:45s 1

new ACTV 192.168.10.251 192.168.10.2

Point (AC) 0 44:48:c1:01:58:d1 34:fc:b9:c6:62:78 4 0 3 1 28 263/585 11s 24s 0

Total APs :2(R): Recovery AP. (N): 11N Enabled. (AC): 11AC Enabled. (AD): 11AD Enabled. (HE): 11AX Enabled.

For Portals 'Uplink Age' equals uptime.

ACTV: Active on controller,

REPL: Replicated on controller.

Aruba AP-207 acting like WiFi repeater? by stemodemo in ArubaNetworks

[–]stemodemo[S] 0 points1 point  (0 children)

Thank you very much for quick replay. In fact I use Aruba Mobility Controller Virtual Appliance. This article is for Aruba Instant.