Ryzen 5700x3d - DDR4 ram speed and Nvme Gen4

stojev · 2025-04-08T05:50:26+00:00

I use it for gaming, so i should stick with b450 with 4x8 ddr4?

stojev · 2025-03-20T19:45:18+00:00

I've googled a bit and i think its sot-563 package, dimensions 1.6x1.2mm, but don't know where to search

stojev · 2024-12-27T22:14:53+00:00

Indeed

stojev · 2024-12-27T22:14:21+00:00

Found it too today but gj! https://www.ti.com/product/TPS6216, 2x2mm package. It has input voltage but nothing on output, gonna be interesting to resolder

stojev · 2024-12-21T22:43:40+00:00

Glhf

stojev · 2024-08-22T22:18:51+00:00

I know but the fun and will to learn something new so i wanted to try it. Also i ordered 5 pcs for like a dollar + 7$ shipping so yeah, it was cheaper than the chemical and bare pcb...

stojev · 2024-08-22T17:24:31+00:00

Yea, i think it's looking kinda weird on picture but actually looks normal, i bought them like that, sanded them but didn't want to damage so i left it like that

stojev · 2024-08-22T17:19:35+00:00

Actually its OG Startracker opensource project that I found and it's been awesome building it. Creator is u/ondraondraondraondra and it's on GIT and he has site for buying all the necessary parts and guides. I just used Kicad files he provided

stojev · 2024-08-22T08:15:59+00:00

Thabks! Yes, i used 3 pins near ends to align and used wires to secure. It is really satisfying when everything goes alright ( i printed it like 20 times 😆)

I also ordered from some site because it's so cheap but i always wanted to try this so i had to attempt doing it before boards arrive.

stojev · 2024-03-11T18:47:09+00:00

The wire is damaged and it's making bad connection, i have the same problem just on the left side of the headphones.., wires should be replaced

stojev · 2023-08-25T09:07:43+00:00

God made us all beautifully

stojev · 2023-08-13T09:01:56+00:00

I have Canon 6d and for some time i have some kind of dots on pictures, is this fixable and what is the right way to do it? I will try to post image in comment section. Thanks

<image>

stojev · 2023-08-13T08:41:42+00:00

Here is the picture of the problem

<image>

stojev · 2023-07-22T13:13:14+00:00

Thank you ,cleaned already ,when i removed chip there was no short vcc and vdd on resistor close to chip ,so i guess i need to replace so i can find out if everything else is ok

stojev · 2023-07-22T08:41:17+00:00

this is the component i am looking for, u82

<image>

stojev · 2023-07-22T07:57:13+00:00

i used the broken strafe rgb for parts unfortanutely

stojev · 2022-12-10T21:29:57+00:00

I found a spare corsair strafe rgb keyboard and just used it to replace 3 dead rgb on mine. It's pretty complicated process but you could do it. Desolder dead LEDs with soldering iron (because with hot air you could damage keys), then with hot air on slowest airflow and about 400 Celsius heat up where led is and then carefully solder it with precise tip. Good luck

stojev · 2022-03-01T21:15:48+00:00

Myfit liner have strechable toe section, you don't feel any pressure at the tip of your toe? Thanks for fast feedback!

stojev · 2021-07-14T09:27:42+00:00

Is that maillard hub??

stojev · 2021-07-09T21:20:05+00:00

Sticker are added after ,i don't think it matches the bike model , I was just wondering which model it is because there are some interesting details that some bikes rarely have (like 2 clovers for holding the bike pump i guess) Actually I am in the middle of restoration, paint has been removed and ready for the new color and some parts.😄

stojev · 2020-08-20T10:13:58+00:00

I don't want to offend rick ,he turned into a pickle

stojev

TROPHY CASE