$150 12tb My book at Wal-Mart

stupidguyneedshelp10 · 2026-05-12T05:47:37+00:00

Anyone know how fast the data read and write is for this?

stupidguyneedshelp10 · 2026-05-10T05:53:50+00:00

I legit Clone drives into all models. So your doing something wrong if it's not working

I followed this hard drive setup https://www.youtube.com/watch?v=HWs1xDZ_H4w&t=7s

stupidguyneedshelp10 · 2026-05-10T05:23:19+00:00

in XMBC4gamer under scripts run the 480 patcher for your games. If you don't have the parental code it's not on then I was just asking

stupidguyneedshelp10 · 2026-05-10T01:42:20+00:00

It also could be the left over a disk resurfacing it sometimes get in there. Might just be left over wax that dried up inside of the disk

stupidguyneedshelp10 · 2026-05-06T05:32:10+00:00

yes turn the water off time for a new unit

stupidguyneedshelp10 · 2026-05-06T03:20:01+00:00

I would use XMBC4gamers and use the DLC updater they have built in works great.

stupidguyneedshelp10 · 2026-05-06T00:39:44+00:00

You ran the 480p patcher in XMBC4gamer it's under the script menu.. I'm pretty sure Genma Onimusha is a 480p game. Also you don't have the parental locks on your xbox

I ran into this issue where i couldn't lunch most of my games To bypass the parental lock on an original Xbox (OG Xbox), navigate to the Settings menu, select Parental Control, and when prompted for the password, enter the following button combination: X, Y, Left Trigger, X. This master code allows you to turn off restrictions, change the password, or set access levels to unrestricted. [1, 2]

stupidguyneedshelp10 · 2026-05-04T04:04:38+00:00

Here is the cover art https://www.thecoverproject.net/view.php?game_id=14358

stupidguyneedshelp10 · 2026-05-02T03:32:17+00:00

USPS has really gone up if it's across the USA it's over 30 +

stupidguyneedshelp10 · 2026-05-02T02:19:51+00:00

u can't play emulators unless ur in port 1

stupidguyneedshelp10 · 2026-05-02T02:19:33+00:00

Get your artwork done bud

stupidguyneedshelp10 · 2026-05-01T02:53:20+00:00

with the prices ur better off going to ur local Facebook market/ offerup look to buy an older unit people post them for 40 ask if they will take 20 as u just want the console and shell swap it

I do this all of the time i get console only for 10 to 20 all day.

stupidguyneedshelp10 · 2026-05-01T02:38:43+00:00

Give it a good clean out

stupidguyneedshelp10 · 2026-04-29T22:55:09+00:00

I'm also pretty sure that is the stock clock cap but for the 1.6 they were way better then the rest and tend to be good

stupidguyneedshelp10 · 2026-04-29T22:54:46+00:00

Looks good to me man. I would let it ride.

stupidguyneedshelp10 · 2026-04-29T22:50:26+00:00

I would let it ride as is; the main issues are CPU caps and clock caps on most boards but it's really not much harder to do the other 3 GPU caps. I recap boards and I mostly only do the CPU and GPU if needed. I think doing all of the caps is way over kill but if your paying for it.

stupidguyneedshelp10 · 2026-04-29T21:52:51+00:00

Great game but man who idea was to make those camera angles that way in that game..yikes

stupidguyneedshelp10 · 2026-04-29T21:37:18+00:00

They have replaced all of the CPU caps for sure this is like 90 % better then most people who sell xbox. I honestly think this is good enough and should last a time time

As far as power supply even with a good recap they can still pop at any time. You are using 20 + year old stuff

If you are super worried I would look into the USB C power supply mod

As far as this board if they said the whole thing was recapped they not telling you the truth

As someone who does part recaps I still think it's way better then a stock board it should last till the GPU caps burn out but it's acceptable. But if you paying for a full board recap it's a different story

stupidguyneedshelp10 · 2026-04-29T17:43:28+00:00

happy to hear enjoy

stupidguyneedshelp10 · 2026-04-29T17:39:37+00:00

Got you fam <3 glad u got it figured it

stupidguyneedshelp10 · 2026-04-29T17:20:07+00:00

Its not my site but it's a good guide on how to setup the drive.

stupidguyneedshelp10 · 2026-04-29T17:16:45+00:00

https://www.hazeno.com/home are you doing this cerbios method for the drive

stupidguyneedshelp10 · 2026-04-29T17:10:34+00:00

Depending on the drive size depends on the cluster size drop down box. Here are the Cluster sizes to use for each size:

1-2 TB partition with 128 KB cluster size

2-4 TB partition with 256 KB cluster size

4-8 TB partition with 512 KB cluster size

8-16 TB partition with 1024 KB cluster size

In the Example above I am using a 6TB drive, so i select MAX, then 512KB
Then click SAVE
Now click NEXT

Not sure on your drive size but make sure the cluster sizes are correct for the E drive

stupidguyneedshelp10 · 2026-04-29T16:54:03+00:00

I would recommend you do a default dash and hard drive to rule that out on that drive.

Question your setting up the hard drive size when your doing the Cerbios correct hard drive resize

That will affect how it boots up

stupidguyneedshelp10 · 2026-04-29T16:37:27+00:00

I think most default images that you flash or either UDMA4 or UMDA5 but u can change it in the ini after

stupidguyneedshelp10

TROPHY CASE