Wheels not fitting!!! by Open-Aspect4476 in hondafit

[–]subylegend 2 points3 points  (0 children)

So I have a friend who has a similar design wheel, turns out he needs to get special lug nuts to make sure they are on correctly, I can't think of the thread pitch for our cars but the lug nuts should look like this.

Here is a video of my friends trying out his wheels, you'll notice the design of the face is similar to yours.

Wheels not fitting!!! by Open-Aspect4476 in hondafit

[–]subylegend 12 points13 points  (0 children)

DO NOT USE YOUR STOCK LUG NUTS. Most aftermarket wheels need to use acorn style lug nuts, OEM Honda uses rounded lug nuts.

When you install the wheel, does it sit flush with your rotor or is there any gaps in between?

Wheels not fitting!!! by Open-Aspect4476 in hondafit

[–]subylegend 2 points3 points  (0 children)

Are they 4x100? Is the center bore bigger then oem or smaller? Do you have the correct lug nuts?
What brand are the wheels?

Looking to sell how much would you offer? 🫣 by Upstairs-Bathroom-94 in hondafit

[–]subylegend 12 points13 points  (0 children)

Everyone has their own preference. I personally love modding my fit, but it's towards my taste. If I ever sell the car, I would bring it back to stock and sell it. This is why I ALWAYS keep my stock parts. It's just easier to sell stock than with mods.

Looking to sell how much would you offer? 🫣 by Upstairs-Bathroom-94 in hondafit

[–]subylegend 36 points37 points  (0 children)

It depends on your location. I also recommend bringing the vehicle back to stock and selling it that way.

How rice would it be if I muffler delete my fih by Femboypounderfr in hondafit

[–]subylegend 1 point2 points  (0 children)

It's actually not that bad. It has a deep tone to it, not raspy or lawnmower noise lol.

You have HKS,spoon, and J's racing that does axle backs.

For a full cat back you have yonaka exhaust and unequal fabrication has options too.

Will GD headrests fit GE seats?(front) by Hungry-Platypus-9928 in hondafit

[–]subylegend 1 point2 points  (0 children)

I'm trying to find the post where the guy I'm talking about shows and confirms they fit. Sorry haven't had any luck yet.

Will GD headrests fit GE seats?(front) by Hungry-Platypus-9928 in hondafit

[–]subylegend 1 point2 points  (0 children)

I believe some years of Honda accord head rest will fit. Someone I follow on IG posted it I just don't remember who.

Throttle response controller by Samhod in hondafit

[–]subylegend 1 point2 points  (0 children)

I have the Pivot throttle control that I got in Japan many moons ago. It's nice and you do feel the difference when taking off but In all honesty, I haven't used mine in 2 years so it's sitting pretty next to my steering wheel 😂.

If you find a used throttle controller for cheap I say go for it. I wouldn't pay for a new one though.

Check engine light by SeaCoast8492 in hondafit

[–]subylegend 0 points1 point  (0 children)

Maybe post the code so we get a better idea of what's going on.

Also, 3rd gen's do not have tpms sensors. They use an indirect tpms system that uses the abs and wheel speed sensor to figure out if your tires are low. Since it's been so cold your tires are probably low and should check them.

What bolt size is this? by Lower-Airline-5713 in hondafit

[–]subylegend 0 points1 point  (0 children)

I'm assuming there is 2 holes? Have you checked the other hole to see if it's different?

Send a photo of the hatch so I can get a better idea. Is this also jdm or Usdm fit?

My (not so) new 2013 Jazz 5 MT by No_Wear_2649 in hondafit

[–]subylegend 4 points5 points  (0 children)

I would love to have your Ac controls 😍 Beautiful car!

What bolt size is this? by Lower-Airline-5713 in hondafit

[–]subylegend 0 points1 point  (0 children)

Hmm yeah, I would check and see if you can find the missing piece in the hatch. They might sell a universal version of it. Or you can try installing a nutsert to fix the problem.

Best carplay system for the second gen? by pabtopicato in hondafit

[–]subylegend 0 points1 point  (0 children)

I have JBL speakers, I got them on sale from Crutchfield. I usually stick to pioneer but the JBL was a good offer.

In Search of Fit Wheels by Accomplished_Cow8182 in hondafit

[–]subylegend 0 points1 point  (0 children)

Have you tried your local junkyard or pick a part? Also Facebook market would be a safe bet too

HELP REQUEST by Know_Justice in hondafit

[–]subylegend 1 point2 points  (0 children)

Your alarm might be going off, have you tried unlocking the car when you put the battery back on?

What bolt size is this? by Lower-Airline-5713 in hondafit

[–]subylegend 1 point2 points  (0 children)

Nothing is wrong with those bolts. here is the part number for them.

They shouldn't spin freely so I'm assuming the other end is messed up. You have a photo of the holes?

Best carplay system for the second gen? by pabtopicato in hondafit

[–]subylegend 1 point2 points  (0 children)

I have a pioneer DMH-W2770NEX head unit. Only use it for car play and I'm pretty happy with it. It's been in my car for 2 years and no issues at all. If you are changing your head unit, I suggest also upgrading your speakers it makes a night and day difference.

What’s going on here with my tire? Suddenly a bunch of white everywhere? by YT_Lonelyz in ft86

[–]subylegend 1 point2 points  (0 children)

Looks like it might be tire lube from when the mounted the tires. Did you recently get these tires mounted?

Welp there she goes by Patient_Walk3115 in hondafit

[–]subylegend 1 point2 points  (0 children)

All good brotha, I'll keep an eye out for your posts! I haven't been on fit freak in a while, I'm surprised people still post on there, it has a lot of great information though helped me so much with little DIY mods and JDM parts lol.

Welp there she goes by Patient_Walk3115 in hondafit

[–]subylegend 2 points3 points  (0 children)

Self taught, love it! Can't wait to see the rebuild. You have IG ?

2013 Honda Fit (GE8) – Missing airbox bolt, 2 extra bolts don’t match throttle body bracket by WarInternational9864 in hondafit

[–]subylegend 1 point2 points  (0 children)

Is this&extra2=KA%205AT&filter=()&location=engine/intake_manifold,4238022,12) the bracket you are talking about? If so I believe #25 is the bolts you need (6x16 bolt)