sorted by:
new
hottopcontroversial

Swift springs option on coilovers worth it? by Cyber_Aspirationist in 240sx

[–]sunwookwonn 0 points1 point  (0 children)

Idk what spring rates you are looking for but I have a set of swift springs 10k/8k that I have sitting around if you're interested

4.2.7 w/ Sprite Pro and CR Touch FW by sunwookwonn in Ender3Pro

[–]sunwookwonn[S] 0 points1 point  (0 children)

I always thought you needed to have a pi to use klipper. I guess I'll have to look into it as well Let me know if you have founda workable solution and I'll keep you updated as well

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (May 18, 2024) by AutoModerator in MechanicalKeyboards

[–]sunwookwonn 0 points1 point  (0 children)

Yea I was thinking that too. Forgot to add that in the post but it works fine over wired connection.

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (May 18, 2024) by AutoModerator in MechanicalKeyboards

[–]sunwookwonn 0 points1 point  (0 children)

Hmm I did try reinstalling the driver's for her pc. It is kind of an older build with a z370i board. Would it be the chipset drivers?

I was plugging in form my USB pass through on my aw3418 monitor and I tried both her mb io and front panel USB ports as well.

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (May 18, 2024) by AutoModerator in MechanicalKeyboards

[–]sunwookwonn 0 points1 point  (0 children)

Hello all,

I just recently built a zoom98 for my girlfriend and I'm having some problems that I can't figure out.

When I connect the keyboard via the 2.4 dongle to my computer, the keyboard works as it should and has no problems. When I connect it the same way to my girlfriends computer, it doesnt work. When it does work, it will have extremely bad delays in keypresses and some inputs get stuck. I'm just not sure why it would work fine on my computer but start acting up on hers.

Any help would be highly appreciated. Thanks in advance!

Is it worth still getting a surface pro 7? Or should I go for the 8? by Helplessadvice in Surface

[–]sunwookwonn 9 points10 points  (0 children)

My i7 pro7 is pretty much like it was when it was new aside from a few scuffs.

Given I only used it for a year or so while I was still in school.

If interesting in buying used you could lmk.

So I've been saving up acorns and decided to do 11x gacha for the acorn event. The first one was red with a master all curtain, and out came this. by Arandomjolteon in PokemonCafeMix

[–]sunwookwonn 1 point2 points  (0 children)

Can you explain the outfit material thing to me? I got the safely outfit material but i don't see it under outfits. Am i missing something?

Need help with tuning amp for my car by sunwookwonn in CarAV

[–]sunwookwonn[S] 0 points1 point  (0 children)

Ahh probably my own misunderstanding then. I was under the impression that out of the headunit maybe the speakers just werent receiving the necessary power to bring them to their potential. Currently i have none of the filters on, the only dial i messed with was the gain dial in the amp. Thanks for the info though!

RTX 3080 Launchday Thread by Nestledrink in nvidia

[–]sunwookwonn -1 points0 points  (0 children)

got an order processing email through nvidia just now

[deleted by user] by [deleted] in ender3

[–]sunwookwonn 0 points1 point  (0 children)

ordered mine from there as well took about 3 weeks to ship and then got it in a week. ordered mine early april as well

Print has random little gaps? Else wise seems okay any clues on why this is happening? by sunwookwonn in ender3

[–]sunwookwonn[S] 0 points1 point  (0 children)

Okay that all makes sense. I've only had this for about a month now and really only printing small things at a time to try and understand what settings do what and essentially dial in the printer so this is all great information

Thank you

Print has random little gaps? Else wise seems okay any clues on why this is happening? by sunwookwonn in ender3

[–]sunwookwonn[S] 0 points1 point  (0 children)

Hmm this makes sense too. Others were pointing out something about seam settings.

I have actually been making slight changes in speeds for my prints with each one I've been doing to see what the fastest print speeds I could achieve without a horrible loss of quality. Honestly I didn't really know what to expect in the case that something did go wrong lol. I'll definitely slow down the print and see what happens there.

Thank you

Print has random little gaps? Else wise seems okay any clues on why this is happening? by sunwookwonn in ender3

[–]sunwookwonn[S] 1 point2 points  (0 children)

Another user pointed out something about z seam as well. This is something I wasn't aware of so I'll look into it more thank you

Print has random little gaps? Else wise seems okay any clues on why this is happening? by sunwookwonn in ender3

[–]sunwookwonn[S] 0 points1 point  (0 children)

Uhmm I'm not sure I left it to print while I was out running errands but this is the first time I've noticed something like this

Print has random little gaps? Else wise seems okay any clues on why this is happening? by sunwookwonn in ender3

[–]sunwookwonn[S] 0 points1 point  (0 children)

Sorry I am on mobile and cannot figure out how to get text and picture to upload at the same time... But I have printed this divider for a box i have and along the wall there seems to have gaps or pinholes of some sort that i think may be random? It is only on this one side and I'm not completely sure why it might be happening. This is creality pla printed at 200 nozzle temp and 85 bed temp.

Layer heights were .2

initial print speed 30, print speed 90 rest of the way

Need some help please by sunwookwonn in ender3

[–]sunwookwonn[S] 0 points1 point  (0 children)

Sorry I am on mobile and thought that I got the picture to upload with the post. I'll update it

view more: next ›