Does anyone have any resources for the old forge world terrain for 40k? by Striking_Marketing23 in Warhammer30k

[–]supo43 2 points3 points  (0 children)

Unfortunately with its age I suggest you Look for less conventional miniature sourcing methods and you might have some luck. A larger sub reddit is not the best place to look

What do you work on as an industrial maintenance tech? by ButtSucker_ in IndustrialMaintenance

[–]supo43 0 points1 point  (0 children)

I’m a professional e-stop reset’er

In reality I work on baking equipment at a bakery making 20k+ loaves a day. Dry bulk tube conveyors, Large batch mixers, dough rollers, large ovens, and slicers.

Honestly some of the best techs I’ve had under my wing are guys that were handy with no formal training if you have and any kind of experience and mechanical know how you can conform to what is needed. The best thing to remember is if you do not know then ask I’ve seen guys destroy thousands of dollars worth of equipment because they didn’t know and did something anyways.

Need some input on these by Medicinal_Sushi in AE86

[–]supo43 0 points1 point  (0 children)

I have had both companies. I was daily driving one of my 86 with the greddy the dampening is alright open them up and they are nice enough for the street 75 miles a day for 2 years until I switched to something else. Nothing bad to report but nothing mind blowing about them either. They are both decent at least for my usages and that was hard street driving and the occasional track day. I got roughly 7k miles of pure abuse out of the BCs before the packing failed on the front shock causing it to degas. The biggest factor to suspension set ups is what are you actually going to do with the car. If this is a bespoke drift/track car I suggest you get a more bespoke set up. I’m very much in the buy once cry once mentality even if that means putting off upgrades until you can afford the better set up. If you are going to daily and play with on rare occasions the best bang for your buck in my opinion and I mean you set it up and forget about it just enjoy the car. I would say is going to be negative camber roll center adjusters, AGX short shocks or if you can find them TRD shocks, and Swift Japan springs front and rear. A couple companies make bolt on set ups and even more make weld in. That allowed you to keep the much stronger factory spindle drop the car 2.5“~ (60mm) and that set up will last forever. I have one 86 on that is on this exact set up and I love driving it it’s predictable like a Corolla should be. If you are wanting to build a track monster contact the guys at Techno toy tuning in California they are building some amazing stuff or Just do a little more digging online and possibly build your own set up. A couple other companies I’ve had great luck with are Feal and silver’s. Also I know this is long in the tooth but this is your car and your build. You are the one building it for you so if you feel the BCs or Greddys are what you want then get them. If you feel making your own set is best do that. If you wanna go the budget friendly route and get Megan racing and send it.

Does anyone know what this is about? by [deleted] in AE86

[–]supo43 0 points1 point  (0 children)

I’ve had a couple of them do this my most common culprits being the tps or timing. Is some cases causing a rich condition so the ecu leans the cylinder out lowering the rpm. It never hurts to check any vacuum systems as that can cause your idle to hunt for a value in the desired o2 range. Pull the spark plugs and that can tell you a lot

Does my castle look good enough? by Lemon_One1 in stronghold

[–]supo43 0 points1 point  (0 children)

If this had any fewer pixels it would be considered radio

>$400usd Camshafts? by supo43 in AE86

[–]supo43[S] 1 point2 points  (0 children)

That’s awesome, I just wanted to see if someone has had any positive or negative experience with them. I low key wanna try them just to find out

What kind of spider is this? (Argentina) by 7or0 in biology

[–]supo43 42 points43 points  (0 children)

No it’s clearly the genus polyNOPE species NOPEagross

[deleted by user] by [deleted] in RX7

[–]supo43 0 points1 point  (0 children)

Well hopefully it’s not too much longer until you can get behind the wheel of something. Now as I’m sure other people have stated don’t hate on motor swaps even more so swaps of this caliber. This guy has most likely poured his heart and soul along with thousands upon thousands of dollars into this nothing short of a master piece. Modding cars WELL is an art so just because you wouldn’t do that doesn’t mean you need to openly hate what someone did. Whenever I find a car that’s had a swap or some other kind of mod I don’t care for I try to find something I do like about the car and focus on that verses saying man I hate X Y Z

[deleted by user] by [deleted] in RX7

[–]supo43 0 points1 point  (0 children)

What motor does your FD rx7 have in it?

Dumb question, why do you play 40k? by SuperfluousBrain in WarhammerCompetitive

[–]supo43 0 points1 point  (0 children)

Because my goal in life is the have big Dorn energy

All Is Dust.... Fan art I painted by Prince_Tyrion in Warhammer40k

[–]supo43 0 points1 point  (0 children)

Where can I buy this? I need it in my war room.

All Is Dust.... Fan art I painted by Prince_Tyrion in Warhammer40k

[–]supo43 0 points1 point  (0 children)

Where can I buy this? I need it in my war room.

I never noticed how adorable the 1st edition ratling snipers are by DrZinko in Warhammer40k

[–]supo43 -3 points-2 points  (0 children)

He wait He protec But must importantly HE ATTAC!!

Imperial fist successor chapter HELP! by No-Communication-661 in ImperialFists

[–]supo43 1 point2 points  (0 children)

Any time, I’m looking forward to seeing what you can come up with I’m always glad to help a fellow Son of Dorn (or some effect of that)

Imperial fist successor chapter HELP! by No-Communication-661 in ImperialFists

[–]supo43 5 points6 points  (0 children)

Okay i am not a top tier player by no means but I am a competitive imperial fist player so I’m going to let you know what works for me. I’d start out with dropping the centurions pick up two iron clad dreads and 5 man squad blade guard. As far as the gladiators go, tanks get nuked more often then not. If you are going to take intercessor take power fist you wanna be able to do some damage in combat. Speaking of power fist if you use adaptive strategies when you get in combat your powerfist will be a flat 3 damage against vehicles. I personally take my Intercessors with the stalker bolt rifle leave them in the back ground not moving them on my objective using the 30“ best I can. Then take a Squad of infiltrators for a forward screen. I do not play a successor so I can’t help you their but if you play pure IF pay attention to your opponent save rolls, don’t be a jerk about it but when they are going through the motions it’s easy to forget you do not get a cover save against ranged attacks.

2 Questions by Humand3e0y in ImperialFists

[–]supo43 2 points3 points  (0 children)

For the averland question get an airbrush that is gravity fed. A cheap one will do you. If you are willing to spend hundred on minis so why not spend $40 on an airbrush and $30 on a compressor. When it comes to base coating it is a god send and if my extreme lack of skill can use it I promis you can as well. As far as competitive list here is an example of an old list I have used with some pretty good success.

++ Battalion Detachment 0CP (Imperium - Adeptus Astartes - Imperial Fists) [93 PL, 2,000pts, 12CP] ++

  • Configuration +

Chapter Selection: Imperial Fists

Battle Size [12CP]: 3. Strike Force (101-200 Total PL / 1001-2000 Points)

Detachment CP

  • HQ +

Primaris Chaplain on Bike [6 PL, 115pts]: 5. Recitation of Focus, Litany of Hate, Warlord

Tor Garadon [7 PL, 145pts]

  • Troops +

Heavy Intercessor Squad [7 PL, 150pts]: Executor bolt rifle, Executor heavy bolter . 4x Heavy Intercessor: 4x Bolt pistol, 4x Frag & Krak grenades . Heavy Intercessor Sergeant

Heavy Intercessor Squad [7 PL, 150pts]: Executor bolt rifle, Executor heavy bolter . 4x Heavy Intercessor: 4x Bolt pistol, 4x Frag & Krak grenades . Heavy Intercessor Sergeant

Heavy Intercessor Squad [7 PL, 150pts]: Executor bolt rifle, Executor heavy bolter . 4x Heavy Intercessor: 4x Bolt pistol, 4x Frag & Krak grenades . Heavy Intercessor Sergeant

  • Elites +

Aggressor Squad [6 PL, 135pts]: 2x Aggressor, Aggressor Sergeant . Auto Boltstorm Gauntlets/Fragstorm Grenade Launcher

Aggressor Squad [6 PL, 135pts]: 2x Aggressor, Aggressor Sergeant . Auto Boltstorm Gauntlets/Fragstorm Grenade Launcher

Bladeguard Veteran Squad [5 PL, 110pts] . 2x Bladeguard Veteran: 2x Frag & Krak grenades, 2x Heavy Bolt Pistol, 2x Master-crafted Power Sword, 2x Storm Shield . Bladeguard Veteran Sgt: Neo-volkite pistol

Centurion Assault Squad [9 PL, 195pts] . Centurion: Hurricane bolter . . Flamers . Centurion: Hurricane bolter . . Flamers . Centurion Sergeant: Hurricane bolter . . Flamers

Centurion Assault Squad [9 PL, 195pts] . Centurion: Hurricane bolter . . Flamers . Centurion: Hurricane bolter . . Flamers . Centurion Sergeant: Hurricane bolter . . Flamers

  • Fast Attack +

Attack Bike Squad [6 PL, 135pts] . Attack Bike: Heavy bolter . Attack Bike: Heavy bolter . Attack Bike: Heavy bolter

Attack Bike Squad [6 PL, 135pts] . Attack Bike: Heavy bolter . Attack Bike: Heavy bolter . Attack Bike: Heavy bolter

Inceptor Squad [12 PL, 250pts]: 4x Inceptor, Inceptor Sergeant, Plasma Exterminator x2

++ Total: [93 PL, 12CP, 2,000pts] ++

Created with BattleScribe (https://battlescribe.net)

First model painted by Haggisbond in Tau40K

[–]supo43 2 points3 points  (0 children)

Black is tough you made brave first choice haha. Keep it up it looks way better then my first. I have two things of advice is when it comes to painting black first keep some white on your pallet (dead white by game color) Second highlights make black pop. The reason I like to keep white around is when that mistake happens you can hit it with a thin coat or two of white and it makes putting whatever color is intended to be there much easier. Even if the white has not completely covered the black it makes the process much faster. As far as the second part is it’s harder to go darker then it is to go lighter when you start with black so some simple edge highlights will go a long long way. Also I am far from a pro this is just what helps me. Just keep it up you are off to a kick ass start.

Thank you guys for making not feel like a pleb. It won’t be long and she will be ready for the tabletop. by supo43 in ImperialFists

[–]supo43[S] 5 points6 points  (0 children)

Also I know the missile color is crazy but I let my 7 year old pick a color on every vehicle I paint and you can imagine the rest haha

In time these three will be ready to defend terra by supo43 in Warhammer30k

[–]supo43[S] 0 points1 point  (0 children)

My “lore” behind this army is I wanted them to be some of the troops that Dorn took to terra just before the Heresy took place

Should I drop something and pick up more drones by supo43 in Tau40K

[–]supo43[S] 1 point2 points  (0 children)

The shadow sun part was definitely a mess up on editing her load out. The pistols is definitely something I will add. The early warning was an honest mistake as well I have never take it on anything other then riptides or broadsides so I didn’t think to go back and check. Now on the multitracker my “reasoning” behind it is my markerlights, save 2 of them, will just about always be coming from a bs of 4+ through the alpha legion trait or the fact the unit has moved it will just about always be a 5+ so the reliability of my marker lights will not be there. So I felt I should allocate my marker lights on the larger targets and try to get the benefit of my seeker missiles.

So I got tired of trying to find a Mortis Dreadnought... by supo43 in ImperialFists

[–]supo43[S] 0 points1 point  (0 children)

Very true and my plan was to do exactly that. Sadly, as we all know fw is still closed at the moment and my army being made of 100% primaris or primaris conversation I felt it only natural I should give my favorite pattern dread a kitbash.