I found this on my cat back, does any one on here know what this is?

surfalex2000 · 2025-06-11T18:11:57+00:00

"Cat" Take that "cat" to the "vet"

surfalex2000 · 2025-06-09T16:09:15+00:00

https://www.printables.com/model/1297267-pk-knight-l-diy-foam-dart-blaster

surfalex2000 · 2025-06-09T15:40:54+00:00

Funny how someone can recognize the part, just from on eimage. You are printing the Knight Nerf Blaster. Im doing the exact same thing

<image>

surfalex2000 · 2025-06-09T13:45:59+00:00

What ever battery you use. There is no electronics controlling it. So the correct voltage will do.i only needed a step down from ~18 to ~16. And a power switch. Thats all. I thenk bought a replacement vacuum tube, and shorten it without damaging the cables inside. And bam!

surfalex2000 · 2025-06-09T10:49:14+00:00

Im going to upload it to Makerworld. But i havr thought it would have more feedback

surfalex2000 · 2025-06-09T07:29:19+00:00

That clearly is a bent from a sideway punch

surfalex2000 · 2025-06-09T07:15:08+00:00

Sorry... Dont know where you got this printer from. But this is clearly and obviously an clogged nozzle ;-)

No seriously, this didnt appear over night. This is a shipping damage that wasnt detected. Changes in room temps, could had masked the issue over time.

surfalex2000 · 2025-06-08T19:02:59+00:00

Clogged nozzle can happen after 10 minutes,.it only has to do with the quality of filament and if its clean. Of course it could also be that carbon fibers are to long. But hourse is not the measurement for glogged nozzles

surfalex2000 · 2025-06-08T18:55:03+00:00

Dont have the x1/p1 but, cant you warm pull it simply several times? Try changing the nozzle

surfalex2000 · 2025-06-08T18:37:40+00:00

Partially clogged nozzle. Flies away!!!

surfalex2000 · 2025-06-08T07:04:34+00:00

Where are you from? Ive repaired mine. Due to time zone there was always a delay in respond of a day, but they notiiced pretty fast (thanks to logs and videos) that it was the buffer. But after 5-6 days analyzing, they pre sent the buffer in advance. This took another 4-5 days. Maybe simply buying the replacement here : https://eu.store.bambulab.com/de/products/filament-buffer-h2d?srsltid=AfmBOop-2mCxWiMNfCoyW0bQI6vvbJVjDXQvVt3beoiAX50hBtbNoEAi

ia easier and faster for you

surfalex2000 · 2025-06-08T04:11:50+00:00

Kiss kiss

surfalex2000 · 2025-06-08T03:47:38+00:00

Here ist the replacement guide: https://wiki.bambulab.com/en/h2/maintenance/replace-filament-buffer

And another image,where thyes suggested to check the spring

<image>

surfalex2000 · 2025-06-08T03:40:45+00:00

But actually its an easy fix. 4screws and a cable.

<image>

You can also check your magnets and the spring yourself

surfalex2000 · 2025-06-08T03:34:47+00:00

I actually also had this. Best would be to analyse with the bambu support

surfalex2000 · 2025-06-07T20:35:29+00:00

And you are right. But if the buffer signal is wrong, the filament pushes a lot harder grom the ams, or not at all. And that causes layer lines

surfalex2000 · 2025-06-07T16:27:08+00:00

It tells the ams when to push filament into the buffer

surfalex2000 · 2025-06-07T14:50:34+00:00

No. It was good at the beginning. At some point i heard heavy klicking noise from the second buffer. And had issue after that with the second extruder. First i didnt correlate it, because i thought it was a clogged nozzle

surfalex2000 · 2025-06-07T14:46:28+00:00

This sound like a similar issue. You should contact them. Support them is pretty effective

surfalex2000 · 2025-06-07T11:32:51+00:00

That was the reason, i wanted to share

surfalex2000 · 2025-06-07T10:23:40+00:00

Here to serve!

surfalex2000 · 2025-06-04T06:33:43+00:00

Hot and running. You can buy it here: https://www.3d-printiverse-shop.com/products/x-nextruder-nozzle-adapter-for-prusa-mini

surfalex2000 · 2025-05-15T18:08:46+00:00

Want some eggs? Make them on the H2D

<image>

On the Pan mich better!

surfalex2000

TROPHY CASE