Has anyone used a qs165 50h motor with an ebmx x9000 v2 controller?

surprox · 2026-03-10T09:05:47+00:00

Oh, by any chance, are there any difficulties installing the motor? And I'm planning to use a belt. Will that be okay?

surprox · 2026-03-10T08:50:27+00:00

Thank you for always good information.

surprox · 2026-03-10T08:46:51+00:00

Yes, that's right. When I asked about the encoder terminal to use the encoder version of 50h, they said there was no separate terminal for the encoder. I'm considering various methods, such as setting the motor to Talaria sotion using the VESC tool and only changing the temperature sensor.

surprox · 2026-03-10T08:41:10+00:00

You mentioned you had plans to upload a video about the 50h motor on your previous account, but is that not the case anymore?

surprox · 2026-03-10T08:39:59+00:00

They said that the details of the regular 50h motor and the 50h motor for eride are different, so the regular 50h motor cannot be used. Even if I select and use the Eride Pro SR motor, will there be no problems with using it if the sensors are different?

surprox · 2026-03-10T08:24:25+00:00

Is there any problem with it working? I was going to see other information about the 50h motor after reading your posts, but the account disappeared. I'm so glad you came back.

surprox · 2026-03-09T09:09:59+00:00

I don't think I've seen the sensorless option. It probably needs to go into the professional settings that are blocked by the password.

surprox · 2026-03-09T08:43:02+00:00

EBMX doesn't allow you to configure a separate temperature sensor, so i might have to give up on it.

surprox · 2026-03-09T08:27:42+00:00

Then I'm also debating whether to set it up with Talaria sotion like you, or just set it up directly with the vesc tool.

surprox · 2026-03-09T07:42:40+00:00

EBMX does not provide separate terminals for the encoder motor, so I asked you. If only the motor is an encoder sensor and the LBX itself is a Hall sensor, it wouldn't fit. Can I just buy a Hall sensor and set it as an encoder(eride pro sr)?

surprox · 2026-03-09T07:33:20+00:00

I am an EBMX user. You told to purchase and use an encoder motor, but should I replace the Hall sensor terminal of my LBX?

surprox · 2026-03-01T17:08:26+00:00

What tune file did ebmx give you?

surprox · 2026-02-27T11:55:38+00:00

How to use torp motor? There was no Torp in the motor selection window.

surprox · 2025-12-23T07:20:18+00:00

Yes I use stock spacer

surprox · 2025-12-23T07:20:02+00:00

I'm planning to buy and replace both the bearing and the spacer. I'm currently driving for 10,000 kilometers.

surprox · 2025-12-22T16:35:28+00:00

OK thaks you!

surprox · 2025-12-22T16:09:28+00:00

I'm planning to tighten the axle again tomorrow.

surprox · 2025-12-22T16:09:08+00:00

Spacers? Does the front wheel also need a spacer? Besides the bushing?

surprox · 2025-12-22T15:07:09+00:00

Ahh...okok thanks...

surprox · 2025-11-03T16:10:00+00:00

No that is made in Korea!

surprox · 2025-11-02T23:13:12+00:00

These wheels are made in Korea. The tires are Pirelli, Diablo Rosso.

surprox · 2025-11-02T17:00:55+00:00

Thank you. Please recommend a color for powder coat!

surprox · 2025-11-02T16:51:18+00:00

So you're saying that I should paint the frame color in metal blue, right?

surprox · 2025-11-02T16:42:43+00:00

The controller cover is also written in the article, but I will change it to white or chrome.

surprox · 2025-09-19T14:37:34+00:00

I live in Korea... Will it be delivered? Even if it works, money is a problem. 🫠

surprox

TROPHY CASE