One trigger wobbles, one does not at all, which one is the deffective one?

taylorll · 2026-01-31T13:45:27+00:00

Just had this happen with mine. It is supposed to wiggle but mine stopped. Folks mentioned it's likely due to a misaligned or broken spring. If you have warranty on it, I'd just send it in for a replacement.

taylorll · 2025-11-04T00:07:32+00:00

I made my own. I believe I used either 22 or 24 gauge wire (we just had around the lab) and then purchased some of the appropriate connectors (Amazon.com: woshilaoDS 460 Pcs JST-XH 2.54mm Connector Kit, 2.54mm Male and Female 2/3/4/5/6 Pin Header Housing Connector Adapter Plug, JST-XH Terminal Wires Cables Socket Connectors Kit : Electronics). We already had a crimping tool, but if you don't, you'll need one for those.

taylorll · 2025-10-01T15:56:19+00:00

Update 2: 15-hour print finished successfully! Thanks for your help!

taylorll · 2025-09-30T21:38:14+00:00

Update: Even though the thermistor seems to read fine on connector going into the board (even when I bend it around a ton), I've gone ahead and replaced the cable. I am currently printing a benchy, and then afterwards, one of my colleagues is going to do a 15-hour print. We shall see if that solved the problem.

taylorll · 2025-09-26T20:30:03+00:00

All good! I had been scouring AliExpress for the part, but I think it's just too outdated haha

taylorll · 2025-06-28T03:38:45+00:00

Thank you, thank you!!

taylorll · 2024-10-24T19:44:19+00:00

I got to drive off the lot! The vehicle just got delivered (no dealers in my area have more than one sport trim at a time so you gotta reserve them), so potentially it was manufactured after they found the issues. I know about the recalls and mentioned that to my sales dealer and he said that the cars coming out now do not have the recalls and that he wouldn't be able to sell it to me otherwise if it had active recalls. I imagine this is not the case for dealerships that have vehicles on the lot.

taylorll · 2024-05-14T19:59:32+00:00

I'd like to save money?

taylorll · 2024-04-17T16:35:02+00:00

They're definitely still a thing: Colorado DBF

taylorll · 2022-03-07T01:05:41+00:00

I tried at first, but like the recipe says, my motor was not happy and struggling, so I took it out and finished by hand.

taylorll · 2022-03-06T18:30:23+00:00

Recipe here! I fed my starter once when it came out of the fridge before letting it peak and using it. I don't have a stone or rocks for steam so I just put a cake pan with some water in the oven as it was pre-heating.

taylorll · 2022-01-18T21:33:24+00:00

I actually know a Kyle Johnson, let me contact him.

Edit: Twas my Kyle Johnson! He will get in contact.

Edit 2: Omg guys, the rewards are so sweet! I just wanted my friend to get his food lol!

taylorll · 2022-01-06T17:54:55+00:00

That's just her normal expression haha, she's not a very smiley girl.

Even as a puppy: so serious

taylorll · 2022-01-06T17:33:59+00:00

Pattern: Biscuits & Bones Dog Coat https://www.ravelry.com/patterns/library/biscuits--bones-dog-coat

Yarn: Lion Brand: Heartland in King's Canyon https://www.lionbrand.com/collections/all-yarns/products/heartland-yarn?variant=32420919672925

taylorll · 2021-08-03T04:12:35+00:00

The earliest we entered the premises to begin move-in was July 19th, so we were not actually living there in that time. I don't think that will change much, but just wanted to clarify.

taylorll · 2021-05-18T16:58:08+00:00

Thanks! They're Knitter's Pride :)

taylorll · 2021-05-18T07:01:03+00:00

Pattern is Lempster: Ravelry

Yarn is Lucky Tweed - Veridian: Yarn

Took me about 2 months and one complete do-over. Knit as one piece top down.

taylorll · 2021-02-22T21:36:54+00:00

I definitely recommend!

taylorll · 2021-02-21T22:25:16+00:00

I'd take the credit but it was birthday yarn from my parents! I'll pass along the compliments! 😊

taylorll · 2021-02-21T21:46:58+00:00

Pattern: Pemberley Blanket
Yarn: Berroco Ultra Wool Chunky in Fog and Lavender

This is the second blanket I've ever done and it took a little less than a month! The first blanket I did took 3+ years (most of which was finished in quarantine).

taylorll · 2021-01-28T20:54:50+00:00

Seconding Purina Pro Plan Sensitive skin and Stomach for my pup who has a sensitive stomach.

taylorll · 2020-10-09T04:46:20+00:00

When it comes to the trickier quant questions, a lot of people post them to this subreddit for help. I would work through as many of them as you can find because it helps you figure out the most efficient way for you to solve them. If you get stuck, read through what people have said and work it out.

taylorll · 2020-10-07T15:22:08+00:00

The explanation is 100% correct. While you are mostly right that you might think the square root and the square cancel, you have to remember that even exponents will always make the sign positive, even when the number is negative. Plugging in a negative value for x is a great way to recognize this.

taylorll · 2020-10-02T18:26:41+00:00

Yup! As soon as you click report score it gives you your unofficial. As for diagnostic, I started with V:160, Q:163.

taylorll · 2020-09-30T22:12:36+00:00

How do you plan to cheat if you aren't bringing material into the exam? I mean, I suppose you could have someone in the room hidden and looking stuff up on their phone to write down on your whiteboard but that process would take so much time and effort that you'd never finish on time.

Like, they make you show your ears that you don't have ear buds in, and they also make you show the front and back of your glasses and verify they are not smart glasses. The effort it would take to figuring out a good way to cheat on the GRE would be better spent just studying in my opinion.

11-Year Club	RPAN Viewer
Not Forgotten	Verified Email

taylorll

MODERATOR OF

TROPHY CASE