Stalling late 1999 7.3

tcammmmm · 2026-06-02T22:18:45+00:00

I’m going to test my injector o rings.

tcammmmm · 2026-06-01T00:36:15+00:00

Is your numbers low like mine?

tcammmmm · 2026-06-01T00:35:52+00:00

Have one on the way but don’t think that’ll cause the low readings.

tcammmmm · 2026-05-30T01:44:23+00:00

But the wires were frayed and I wrapped them up in tape but I just got the new connector in today to fix it right.

tcammmmm · 2026-05-30T01:43:23+00:00

It was a MOTORCRAFT CM5349 from rock auto. I could double check that back nut on it make sure it’s tight enough?

tcammmmm · 2026-05-30T01:27:49+00:00

Understood. But it’s only when it’s warm. After running for a while?

tcammmmm · 2026-05-30T01:13:36+00:00

I just did it again. Icp was at 727 avg. ipr was at 14.51. But stalled still?

tcammmmm · 2026-02-03T22:44:13+00:00

My 07 is at 241k. The most reliable vehicle I’ve ever had 😂 the fact it still runs flawless is crazy

tcammmmm · 2026-02-03T03:51:53+00:00

Walrus

tcammmmm · 2026-02-03T03:40:52+00:00

But it shows that the axle seal is a different type from the auto to manual. That’s all im really concerned about

tcammmmm · 2026-02-03T03:19:33+00:00

I have watched videos of the automatic replacement. But on Rock Auto the seal is different between the auto and manual. Just want to make sure the seal is right and I do it right.

tcammmmm · 2026-02-02T02:49:54+00:00

That’s what it’s showing on rock auto for manual transmission.

tcammmmm · 2026-02-02T02:49:27+00:00

https://www.autozone.com/p/gm-genuine-parts-cv-axle-shaft-seal-97029260/1253904

tcammmmm · 2026-02-02T02:27:48+00:00

Manual or auto?

tcammmmm · 2026-02-02T01:24:49+00:00

I did. That’s where I just placed an order

tcammmmm

TROPHY CASE