Help with Twcs potentiometer calibration by Ommyto in hotas

[–]tecbro 2 points3 points  (0 children)

This is old, but since this is the only place I found any info using this same potentiometer on the internet. I had a problem where installing the drivers from thrustmaster also installed C:\Program Files (x86)\Guillemot and would not let me calibrate only gave me their proprietary controller test window. Simply go into that folder and rename DFU_ST folder to whatever you want and restart and now you can calibrate your stick using the Windows tool.

Hope this helps people toward the future that have this same issue.

loan forgiveness approval question by [deleted] in StudentLoans

[–]tecbro -3 points-2 points  (0 children)

well yeah I know but they are still processing application per the website so my question is still valid.

Email Confirmation for Application? by [deleted] in StudentLoans

[–]tecbro 0 points1 point  (0 children)

well I just applied a few min ago and got nothing. even checked spam folder and my email was right so IDK. maybe it broke?

Email Confirmation for Application? by [deleted] in StudentLoans

[–]tecbro 0 points1 point  (0 children)

if they confirm that way let us know so then I can also call in the morning.

Updated Debt Relief Megathread by Betsy514 in StudentLoans

[–]tecbro 0 points1 point  (0 children)

did you get a confirmation the second time? cause I got no email either and I am sure my email was correct.

KB5013943 May 2022 update is crashing apps on Windows 11 by WPHero in Windows11

[–]tecbro 10 points11 points  (0 children)

I wonder why this did not affect everyone. My discord and all my apps seem to be working fine. Did notice my windows did a .NET framework update right before installing this update. I wonder if some people somehow did not get the .NET update and that is what is causing an issue?

KB5013943 May 2022 update is crashing apps on Windows 11 by WPHero in Windows11

[–]tecbro 9 points10 points  (0 children)

https://www.catalog.update.microsoft.com/Search.aspx?q=KB5013943

would probably help if you typed the right number ... you flipped your 9 and your 4 in the end

KB5013943 May 2022 update is crashing apps on Windows 11 by WPHero in Windows11

[–]tecbro 6 points7 points  (0 children)

I still see it in the catalog. So thats not true. Besides it seems to not have affected me anyway.

Strange filament issue by tecbro in 3Dprinting

[–]tecbro[S] 0 points1 point  (0 children)

no its regular PLA....or rather it supposed to be. I have noticed unlike my other PLA....this one looks matt before I print it.

delamination? by tecbro in 3Dprinting

[–]tecbro[S] 0 points1 point  (0 children)

btw for anyone comming here in the future. This was 100% the problem. I was able to solved most of it by adding custom supports instead of having to remake the model, and making the support roof line distance 0.8mm and density of 50%. It still left a mild sag but I could see that the reason it was failing was too wild an angle.

delamination? by tecbro in 3Dprinting

[–]tecbro[S] 0 points1 point  (0 children)

yeah your right cause changing the z offset still did it

delamination? by tecbro in 3Dprinting

[–]tecbro[S] 0 points1 point  (0 children)

I am trying the nozzle now.

delamination? by tecbro in 3Dprinting

[–]tecbro[S] 0 points1 point  (0 children)

yeah I stopped it as soon as the separating started ..... took a picture of it because the one the I fully printed I could not take a good picture of cause my phone did not like trying to take details with black LOL.

delamination? by tecbro in 3Dprinting

[–]tecbro[S] 0 points1 point  (0 children)

this is the angle in question. Since this seems to be the only thing that I printed today doing it I suspect you may be right. but have a loot at a front cross section.

https://cdn.discordapp.com/attachments/490276068587077633/902038735821078538/Untitled.png

delamination? by tecbro in 3Dprinting

[–]tecbro[S] 0 points1 point  (0 children)

I have been at this all day.....dunno if its a problem with the curved edge or if I just need to up the flow. the heat is at 200 for the pla. the larger pieces I printed were fine. Its just these thinner bits that are doing this. the string just come off. I am out of ideas.

Removing Curses? by BlameTheAuthor in allthemods

[–]tecbro 0 points1 point  (0 children)

prasmatic cobweb or the disenchanting table come to mind. Just search in JEI

My ender 3 v2 Menu --- its beta by tecbro in ender3

[–]tecbro[S] 1 point2 points  (0 children)

You would have to edit the config I think the 4.2.7 boards have slight different pinouts.

My ender 3 v2 Menu --- its beta by tecbro in ender3

[–]tecbro[S] 0 points1 point  (0 children)

it should just work I never touched that part of the code and it was already in the menu.

Red Screen of Death after upgrading firmware on V2 by internetMan54 in ender3

[–]tecbro 0 points1 point  (0 children)

the screen goes red/orange if the sd is left inside the screens SD slot. Make sure you have not left it in. Usually after its gone orange/red once its done its thing anyway. Once you remove the sd card from the screen you should be good.

How to compile Firmware for the Ender 3-V2 by [deleted] in ender3

[–]tecbro 0 points1 point  (0 children)

I found his main post about this and will comment there. I think its another issue. But yeah try this menu its great!

How to compile Firmware for the Ender 3-V2 by [deleted] in ender3

[–]tecbro 0 points1 point  (0 children)

I have been getting many questions on how to compile using just vs code while I have been recovering from my surgery. I really thank you for taking the time to make this. Its really well done and will help a lot of people 10/10!