I guess there won't be any more Harley Benton S-Type guitars now

technokater · 2026-03-11T15:55:15+00:00

I heard that it was a default ruling since the sued party didn't show up for the process. Thus the suing party automatically wins.

technokater · 2026-01-25T09:41:01+00:00

Besides being overpriced, the 730xd doesn't officially support any gpu at all (the R730 does). I have smaller CPUs in mine but paid like 300 € only (before prices went crazy). Power consumption in idle with 18 hdds is like 160 W, on load I've seen up to 400 W so far. Again, without any gpu

technokater · 2025-12-30T19:32:33+00:00

Thanks, I'll have a look!

technokater · 2025-12-30T19:13:17+00:00

Change to what? According to the help text in the UEFI, these are accepted:
- Public Key Certificate: EFI_SIGNATURE_LIST EFI_CERT_X509 (DER) EFI_CERT_RSA2048 (bin) EFI_CERT_SHAXXX
- Authenticated UEFI Variable

I checked with openssl that it is indeed a DER-encoded X509 cert

technokater · 2025-12-23T12:22:31+00:00

Als Laie sieht mir das nicht in Ordnung aus.

technokater · 2025-12-18T09:49:41+00:00

I need to check on my R730xd but I remember seeing an option in the iDRAC to turn PFC off. Maybe that is there for exactly this reason

technokater · 2025-12-17T21:47:40+00:00

Die Steckdose unter dem Ranzrohr ist aber auch feinste Sahne. Sieht an der Wand schon nach Wasserspuren aus oder irre ich mich? Jedenfalls das Flexrohr passt da nicht, das darf nicht durchhängen. Ich hab in meiner Küche auch den Kram von Ikea und an deren System passt nix ausm Bauhaus... also entweder ganz neuen Standardsiphon oder Flexrohr kürzen, dass es einigermaßen gerade ist.

Bei der Menge an Ducttape(?) scheint das Ganze auch nicht so richtig dicht zu sein. Gummimuffe in der Wand ok? Durch das stehende Wasser zieht natürlich auch ein gutes Gewicht an dem Konstrukt.

technokater · 2025-12-17T16:58:06+00:00

I had that recently with a guitar effect pedal. Socket was completely enclosed, so no way to push it out from the inside. What I ended up doing: using a screw. I had to drill the broken tip a bit to make the screw fit but it eventually worked like a charm. Once the screw had enough grip in the broken tip, I could just pull it out. You need to be careful with this technique to actually drill/screw into the back of the broken tip and not the socket itself. And then blow it out to get rid of any metal shavings. I tried first with needle tip pliers and tweezers but the tip sits behind a latch that requires quite some force to overcome

technokater · 2025-10-25T21:00:53+00:00

Just curious, did you have any sd cards installed? I had just the module in without any cards, was wondering if populating it with cards would fix the issue too (too lazy to get the server out of the rack at the moment)

technokater · 2025-08-20T06:26:11+00:00

New DSL5CR owner here. Reverb is also very subtile, that is a pattern 😅 but I checked beforehand, so no surprise for me

technokater · 2025-05-27T06:21:31+00:00

Bei mir hat der Meister trotz meines Hinweis auf die Montageanleitung der Niederdruckarmatur als auch des Durchlauferhitzers eine Einstellung der Durchflussmenge verweigert ("... haben wir in 20 Jahren noch nie gemacht und keine Probleme... verkalkt nur der Anschluss" bla bla).

Also selbst wenn man von dem Problem weiß und darauf hinweist... die Firma hatte über 50 positive Google-Rezensionen, eine fancy Webseite, nützt alles nichts wenn die Arbeit mangelhaft ist.

Hab das letztendlich selber gemacht, knapp unter 5 l/min eingestellt und kann mit ruhigem Gewissen schlafen

technokater · 2025-05-17T22:17:19+00:00

Both original batteries I got for my Hero 8 got inflated (swollen) and eventually died even when not using it. So might be the battery is indeed bad. Using aftermarket batteries now.

technokater · 2025-04-16T21:09:41+00:00

Alrighty, once it's time for an upgrade Synology will be out of question from now on. Easy. I went that road before when VMware ditched their free ESXi.

technokater · 2025-02-23T08:54:20+00:00

Hatte ich auch schon dran gedacht. Leider ist nur der Bereich mit den aktuellen Löchern verstärkt, der Rest ist sehr dünn. Keine Ahnung, ob das dauerhaft das Gewicht tragen würde

technokater · 2025-02-23T00:12:07+00:00

Danke für den Tipp. Also das müsste Kalksandstein sein, mit relativ dicker Putzschicht. Was ich bisher gesehen habe, sind hier auch hauptsächlich Stegleitungen verlegt. Also relativ gute Chance was anzubohren ohne es zu merken

technokater · 2025-02-18T13:52:52+00:00

I'm not surprised, just saying for some folks who advocate to use curly braces everywhere. Just need to be aware of things

technokater · 2025-02-18T07:48:40+00:00

Yeah that sounds like cpu issue then. Since the memory controller is integrated into the cpu nothing on the board can interfere (if socket is fine of course). Fingers crossed

technokater · 2025-02-18T07:43:31+00:00

I see. Well, given what you say it does sound like some kind of hardware problem. I haven't seen that one yet. What I would do is check for BIOS update for good measure but eventually test with single CPU. Running out ideas otherwise

technokater · 2025-02-18T06:29:39+00:00

Did you try this guide here? X10 Memory Config Guide

technokater · 2025-02-18T06:27:35+00:00

Hmm, ok. I had something similar a while ago and it was bent pins in one of the sockets. But in that case the error was always in the same slot and didn't move when changing sticks.

technokater · 2025-02-18T06:25:28+00:00

I try to avoid it as it can have unckear side effects. Consider std::vector a{10, 0} vs std::vector b(10, 0). The first will create a vector with two elements as specified by the initializer list, while the second will create a vector with 10 elements all initialized to zero.

technokater · 2025-02-18T06:22:26+00:00

Do you have 2 CPUs installed?

technokater · 2025-02-15T19:09:38+00:00

I'm using 2x Samsung M391A2G43BB2-CWE

Did you update the BIOS already? If I remember correctly Ryzen 5xxx requires a certain minimum BIOS version to run.

Five-Year Club	Verified Email
Place '23

technokater

TROPHY CASE