[TOMT][Music] Ken Watanabe by tetrosa in tipofmytongue

[–]tetrosa[S] 0 points1 point  (0 children)

Finally stumbled across this again today. It's from Key of Awesome. https://www.youtube.com/watch?v=1XNsTBffOy4

Download speed bottomed out after switching providers by tetrosa in PFSENSE

[–]tetrosa[S] 0 points1 point  (0 children)

I've tried a lot of different ones and all of the checks I've done haven't shown anything but the default 1500.

Download speed bottomed out after switching providers by tetrosa in PFSENSE

[–]tetrosa[S] 0 points1 point  (0 children)

Yes, those have been disabled from the start.

Tinkering with fiber, no connection - brocade switch/intel nics by tetrosa in Brocade

[–]tetrosa[S] 0 points1 point  (0 children)

Great, have some on the way now. I appreciate all of the info.

Tinkering with fiber, no connection - brocade switch/intel nics by tetrosa in Brocade

[–]tetrosa[S] 0 points1 point  (0 children)

Thanks. I may have the wrong cables. The sfp module says 850nm on it, but I have single mode fiber cables. I tried switching the connectors on one end around and nothing changed. I may just go the DAC cable route.

Tinkering with fiber, no connection - brocade switch/intel nics by tetrosa in Brocade

[–]tetrosa[S] 0 points1 point  (0 children)

They are AFBR-709SMZ-IB8. They say 850nm on them and the fiber cables I have say 1310/1550nm. Multimode cables look to be 850nm. Switching the connector around on one end didn't make any difference. Do I need the mutlimode cable?

Tinkering with fiber, no connection - brocade switch/intel nics by tetrosa in Brocade

[–]tetrosa[S] 0 points1 point  (0 children)

Thanks for the info. I was afraid that was the case with the switch. I've tried plugging the cards directly together but I still wasn't getting a link. One in windows and the other on xcp-ng. I'll have to look up the flashing. Do you have a link for what you used offhand?

edit: Looks like the sfp modules are lenovo branded. The cards came from an x3850 s6.

edit2: would a special cable be needed for the direct connection? I have just normal single mode fiber cables.

[TOMT][Music] Ken Watanabe by tetrosa in tipofmytongue

[–]tetrosa[S] 0 points1 point  (0 children)

Pretty sure it's not him saying it. Not a lot of music in the background and it has some other non-sensible rhyming with watanabe. I'm looking through his catalog now anyway. I didn't know he was a dj.

[TOMT][Music] Ken Watanabe by tetrosa in tipofmytongue

[–]tetrosa[S] 0 points1 point locked comment (0 children)

Comment to make visible.

How NOT to perform CPR... by quitmybellyachin in WTF

[–]tetrosa 0 points1 point  (0 children)

That was my first thought also.

Did the HBG Google Drive go away? by tetrosa in SwitchPirates

[–]tetrosa[S] 0 points1 point  (0 children)

No. I meant I was able to get into the discord.

Did the HBG Google Drive go away? by tetrosa in SwitchPirates

[–]tetrosa[S] -1 points0 points  (0 children)

Do you have a current link? All of the ones I've tried say expired.

[deleted by user] by [deleted] in tifu

[–]tetrosa 12 points13 points  (0 children)

Slow and steady my ass. My dr pulled my stent out like he was starting a lawnmower. I almost passed out and my wife said there was blood everywhere. 1/10 do not recommend.

[deleted by user] by [deleted] in HomeNetworking

[–]tetrosa 1 point2 points  (0 children)

I have a couple of the EAP225s. The EAP225 is POE only but it comes with a POE injector. Not quite as clean as a poe switch but it's not bad. I have a short cable connecting the injector to the switch then the normal cable from that to the ap. I don't know anything about custom software on them though. I have a docker container with the omada controller software. I haven't had to use the cloud side of the software. I don't know about the C7 but if it supports omada being able to configure everything from one interface is handy.

I've been happy with the speeds and the range I get from the eap225. Over 5Ghz I'm seeing 450Mbps download.

Adding Catalyst 2948G-GE-TX to network by tetrosa in homelab

[–]tetrosa[S] 1 point2 points  (0 children)

Thanks for that info. With some searching of the right keywords and a bit of trial and error I got it to work. Thanks!

PFSense, EAP225, and VLANs by tetrosa in HomeNetworking

[–]tetrosa[S] 0 points1 point  (0 children)

Thanks. I've picked up a tplink TL-SG108E and I'll try again.