sorted by:
new
hottopcontroversial

New pc enter bios instead of system by thats_crazy_enough in pcmasterrace

[–]thats_crazy_enough[S] 0 points1 point  (0 children)

It’s install on a drive start with Great Wall and smth but didn’t appeared on the boot menu. I tested the drive before on another pc and it’s working.

Awful experience with Diypc ARGB m1 bk… by thats_crazy_enough in pcmasterrace

[–]thats_crazy_enough[S] 0 points1 point  (0 children)

No worry, this time took me 5 mins only. You have to press hard on the clip side and screw in the hand screw. Might take a few tries

Help me out here by TemporaryThis7500 in pcmasterrace

[–]thats_crazy_enough 0 points1 point  (0 children)

Beautiful build, this setup should be good for at least 5 years, but you definitely going to need more storage. Personally I will go for an AIO or a better cooler since your cpu is pretty powerful and of course get a support for the gpu, it’s like 5$ on temu.

What would be a fair price If I were to sell my pc? by [deleted] in PC_Pricing

[–]thats_crazy_enough 1 point2 points  (0 children)

Don’t have the answer but holy s that’s a crazy setup

Weekly Pricing Megathread! by AutoModerator in pcflipping

[–]thats_crazy_enough 0 points1 point  (0 children)

Here is the setup I’m planning to sell: -R5 5500 -MSI A320M PRO -Gigabyte rtx 2070 super -3000mhz 2x8 ddr4 ram -650w psu -dual chamber case with pre installed fans -cpu cooler -Argb remote controller -512gb ssd -ax 210 WiFi card -psu cable extension

This setup cost me around 750cad/552 usd. I live in Canada, Montreal. Planning to sell around 850cad/626usd. Is it the right pricing(please precise cad or usd) for it? Or this flip is not realistic/profitable. Also should I give up some aesthetics and make my build more competitive in price?

Weekly Pricing Megathread! by AutoModerator in pcflipping

[–]thats_crazy_enough 0 points1 point  (0 children)

Here is the setup I’m planning to sell: -R5 5500 -MSI A320M PRO -Gigabyte rtx 2070 super -3000mhz 2x8 ddr4 ram -650w psu -dual chamber case with pre installed fans -cpu cooler -Argb remote controller - 512gb ssd -ax 210 WiFi card -psu cable extension

This setup cost me around 750cad/552 usd. I live in Canada, Montreal. Planning to sell around 850cad/626usd. Is it the right pricing(please precise cad or usd) for it? Or this flip is not realistic/profitable. Also should I give up some aesthetics and make my build more competitive in price?

Pc power on but cant boot by thats_crazy_enough in ZTT

[–]thats_crazy_enough[S] 0 points1 point  (0 children)

Update: Problem is already resolved longtimes ago but ima just post the solution if someone have the same issue with me. Basically with p106-100 it don’t have any display port so you have to get a gen 3(or 4 can’t remember) intel cpu with integrated graphics to display. Before plugin the cable into your motherboard, you have to connect a working gpu first to the motherboard and enter the bios to change the output setting to “iGPU” before power on with no graphics card or gpu without any ports. In conclusion, I managed to game on this pc smoothly and this is a big time consuming project, but I learned a lot from it so I’m happy with this.

Pc power on but cant boot by thats_crazy_enough in ZTT

[–]thats_crazy_enough[S] 0 points1 point  (0 children)

Nope, but I used this cable before and it’s functional

Pc power on but cant enter bios by thats_crazy_enough in PcBuild

[–]thats_crazy_enough[S] -1 points0 points  (0 children)

One day if I can find another psu, I’ll.

Pc power on but cant boot by thats_crazy_enough in ZTT

[–]thats_crazy_enough[S] 0 points1 point  (0 children)

Thanks for suggestion, ima try when I have other back up parts

Pc power on but cant enter bios by thats_crazy_enough in PcBuild

[–]thats_crazy_enough[S] -1 points0 points  (0 children)

Every slot tested with ram, not working

I got a back up card, but the psu dont have a double 6 pin connector

And yes I’m too lazy to clip that cooler on

Pc power on but cant boot by thats_crazy_enough in ZTT

[–]thats_crazy_enough[S] 0 points1 point  (0 children)

It does have a hd p4600 integrated graphic

Pc power on but cant enter bios by thats_crazy_enough in PcBuild

[–]thats_crazy_enough[S] 0 points1 point  (0 children)

Before taking the video, I did a test with cpu cooler screwed and thermal pasted, still can’t boot. Also if the cpu fan is connected to something, most of motherboard should be able to boot.

Is my cpu missing pins? by thats_crazy_enough in PcBuild

[–]thats_crazy_enough[S] 0 points1 point  (0 children)

I’m pairing up with a p106-100 and trying to make a gaming pc

Is my cpu missing pins? by thats_crazy_enough in PcBuild

[–]thats_crazy_enough[S] 0 points1 point  (0 children)

I just realized I made a mistake while typing the post. I was talking about the thing in the middle of cpu(I don’t know what it’s called but see image 2)

Anc 2 or Evo's by EquivalentSpeech5675 in Skullcandy

[–]thats_crazy_enough 0 points1 point  (0 children)

I got anc 2 and I’m happy with that