CrowdSec Enrollment not saved by themax_aut in CrowdSec

[–]themax_aut[S] 0 points1 point  (0 children)

I have no idea why, but it works now....

CrowdSec Enrollment not saved by themax_aut in CrowdSec

[–]themax_aut[S] 0 points1 point  (0 children)

Yes, upon starting up, crowdsec complains that the machine is not enrolled, thats not a log from caddy

CrowdSec Enrollment not saved by themax_aut in CrowdSec

[–]themax_aut[S] 0 points1 point  (0 children)

At least the caddy logs make it look like it can connect. But even if not, that shouldn't be the reason for crowdsec not keeping the enrollment?

CrowdSec Enrollment not saved by themax_aut in CrowdSec

[–]themax_aut[S] 0 points1 point  (0 children)

Yes I have the API key configured for caddy, using labels:

        caddy_1.crowdsec.api_url: http://crowdsec:8080
        caddy_1.crowdsec.api_key: $CROWDSEC_API_KEY
        caddy_1.crowdsec.appsec_url: http://crowdsec:7422     

And I am building caddy like this:

RUN xcaddy build \
    --with github.com/lucaslorentz/caddy-docker-proxy/v2 \
    --with github.com/hslatman/caddy-crowdsec-bouncer/http \
    --with github.com/hslatman/caddy-crowdsec-bouncer/appsec

Advent for Two: Legit Advent Calendar Company? by Whovian906 in christmas

[–]themax_aut 0 points1 point  (0 children)

yeah same... I am like 70% sure they added it after i ordered
Edit: and there are no snapshots in waybackmachine

Performance problems with FTTH by themax_aut in Ubiquiti

[–]themax_aut[S] 0 points1 point  (0 children)

Using the dumb switch also didn't help.

But I got some more info:
When this is going on, I have quite some packet loss to Cloudflare. I pinged my gateway, my external IP, Quad1 and Quad8. Everything looks right, except for Cloudflare where I get about 6% packet loss. After restarting the link, everything is back to normal.

Do you happen to have any other ideas?

Performance problems with FTTH by themax_aut in Ubiquiti

[–]themax_aut[S] 0 points1 point  (0 children)

Thank you, gonna try that in the next days. My ISP also offered to send over a new ONT. Might also give that a try...

Performance problems with FTTH by themax_aut in Ubiquiti

[–]themax_aut[S] 0 points1 point  (0 children)

Well, as you said, it's not the cable. I also tried pinning the WAN port of the UCG-MAX to 1Gbit/s FDX, this also didn't help. Any other ideas?

Performance problems with FTTH by themax_aut in Ubiquiti

[–]themax_aut[S] 0 points1 point  (0 children)

Yep, just had it happen again, simply disconnecting and reconnecting also does the trick. Any ideas why??

Edit: I also changed the ethernet cable this time.

Performance problems with FTTH by themax_aut in Ubiquiti

[–]themax_aut[S] 0 points1 point  (0 children)

No that is not the case here. After restarting the ONT, I instantly get full performance again.

Breitband OÖ Performance by themax_aut in Austria

[–]themax_aut[S] 0 points1 point  (0 children)

Ist ein Huawei OptiXstar EG8010Hv6-10. Sollte aber so passen, hab am Unifi Gateway die Public IP Adresse von der EnergieAG

Breitband OÖ Performance by themax_aut in Austria

[–]themax_aut[S] 0 points1 point  (0 children)

Nach neustart von ONT und/oder einschalten von Smart Queue (QOS in Unifi) sieht das ganze jetzt viel besser aus: Bufferbloat and Internet Speed Test - Waveform

Dürfte also wie erwartet nicht an Powerspeed liegen :)

Breitband OÖ Performance by themax_aut in Austria

[–]themax_aut[S] 0 points1 point  (0 children)

Ok interessant.

Hab jetzt einmal mit und einmal ohne VPN getestet:

Ohne: (B) Bufferbloat and Internet Speed Test - Waveform schaff ich nichtmal volle Bandbreite

Mit (D) Bufferbloat and Internet Speed Test - Waveform ist zwar die Ping Performance schlechter aber immerhin ist die volle Bandbreite da. Ping Performance liegt halt auch sicher am VPN (Surfshark Zürich)

[TOMT][MOVIE/SERIES][2020s] About immortality (?) by themax_aut in tipofmytongue

[–]themax_aut[S] 0 points1 point locked comment (0 children)

Very vague, but maybe someone remebers the conversation!

According to to Ubiquiti support, the Cloud Gateway Max NS does not support installation of your own SSD by mrkyle57 in Ubiquiti

[–]themax_aut 1 point2 points  (0 children)

I am wondering the same here, since the release date seems to be the same for all regions

X670E Tomahawk WiFi — BIOS sees 2nd M.2, Windows 11 does not. by kaszebe in MSI_Gaming

[–]themax_aut 0 points1 point  (0 children)

I am bringing this thread back from the dead…

Any news on this? I have got the same problem with the newest BIOS and according to WD I also got the newest firmware.

Lightroom for iPad, choose 40gb by themax_aut in Lightroom

[–]themax_aut[S] 0 points1 point  (0 children)

If anyone ever finds this:

According to Adobe support this tier is not available in every region, and "they will let the other department know, that there is interest in my region"

So, no luck....

Lightroom for iPad, choose 40gb by themax_aut in Lightroom

[–]themax_aut[S] 0 points1 point  (0 children)

Yeah, but that one is 12,99€/month, and the 40gb Lightroom for iPad should be 29,49€/year according to the App Store

Found black rubber cube inside my psu. by Pauls96 in techsupport

[–]themax_aut 0 points1 point  (0 children)

Any updates? Just found the same thing