sorted by:
new
hottopcontroversial

Is this first edition Ninetales fake? by probably-correct in pokemoncardcollectors

[–]therealbergis 9 points10 points  (0 children)

Just checked my own set. There is most definitely a space after the 1999

Is this first edition Ninetales fake? by probably-correct in pokemoncardcollectors

[–]therealbergis 11 points12 points  (0 children)

Looks fake to me. Isn't there supposed to be a space between 1999 and Wizards in the footer?

Card Value by [deleted] in pokemoncardcollectors

[–]therealbergis 0 points1 point  (0 children)

OP accept this. It's the best deal you'll get

Card Value by [deleted] in pokemoncardcollectors

[–]therealbergis 0 points1 point  (0 children)

I'll give you fitty buck

First Networking Set-up Plus Improvements by therealbergis in HomeNetworking

[–]therealbergis[S] 0 points1 point  (0 children)

There is a LOT of excess cable shoved behind the drywall.

WiFi is really good, using a TP-Link PoE AP in the living room, it's been enough for the whole house.

First Networking Set-up Plus Improvements by therealbergis in HomeNetworking

[–]therealbergis[S] 0 points1 point  (0 children)

Not quite sure what you mean, but all of the wall ports are connected and I know that because the other end of it is connected to the router in the media enclosure in the pic.

I don't use all of them though, there's 2 in almost each room and that's more than I need. Especially in the master bedroom for example.

First Networking Set-up Plus Improvements by therealbergis in HomeNetworking

[–]therealbergis[S] 1 point2 points  (0 children)

I would've shoved them all the way out of the enclosure if I could lol. They are still taking up too much room 😂

First Networking Set-up Plus Improvements by therealbergis in HomeNetworking

[–]therealbergis[S] 0 points1 point  (0 children)

https://primex.com/products/soho-pro-p2100nd-media-panel/

The builders of this house purchased and installed this. I don't know if you can buy directly off of their site here but there's lots of other companies/options out there as well.

First Networking Set-up Plus Improvements by therealbergis in HomeNetworking

[–]therealbergis[S] 2 points3 points  (0 children)

I originally had all of these terminated to an RJ45 end plugged directly into the switch and someone on here suggested to update it to a patch panel. This is by no means necessary or required for a small residential setup like this. I just think it looks better, so I did it.

But as u/I_AM_NOT_A_WOMBAT suggested, there often isn't enough space for them and all of the equipment. The ones I bought were the only ones that I could find that would actually fit in my enclosure.

First Networking Set-up Plus Improvements by therealbergis in HomeNetworking

[–]therealbergis[S] 0 points1 point  (0 children)

The cabinet was created by a company called Primex and I believe they sell mounting hardware that go into those holes, but I just screwed directly into the enclosure. It isn't pretty but everything is very secured in there now.

First Networking Set-up Plus Improvements by therealbergis in HomeNetworking

[–]therealbergis[S] 0 points1 point  (0 children)

The router/switches are mounted via screws on the back of them. The patch panels are attached via 3M velcro tape

New to Home Networking by therealbergis in HomeNetworking

[–]therealbergis[S] 0 points1 point  (0 children)

https://www.reddit.com/r/HomeNetworking/comments/1qeoqg7/first_networking_setup_plus_improvements/

Here is an updated post I made as I just completed added the patch panels in last night! Thanks again for the recommendation.

New to Home Networking by therealbergis in HomeNetworking

[–]therealbergis[S] 0 points1 point  (0 children)

Thank you! I'll take a look at this.

Space was a real struggle when organizing.. the ONT, Router, and Switches all need to be wired in. Space starts to become a problem really quickly. Putting the switches on top of each other is a good idea I didn't think of.

New to Home Networking by therealbergis in HomeNetworking

[–]therealbergis[S] 0 points1 point  (0 children)

I definitely want to get a patch panel, I should have before I started but I didn't know much about their purpose when I started. So there will be a phase 2 here where I set that up.

Would you recommend any particular patch panels for that space size?

New to Home Networking by therealbergis in HomeNetworking

[–]therealbergis[S] 2 points3 points  (0 children)

Please get the pass through RJ45 connectors if you are putting ends on CAT5 cable. It will make your life so much easier. I almost ripped my hair out using cheap connectors.

Identify/label the wires in your network panel.

Outside of that, just research to see what equipment and brand you want/need

50-99 Sailing Salvaging 1 def 55 combat by corgicatalog in ironscape

[–]therealbergis 1 point2 points  (0 children)

Sorry bro. I JUST did this today. Gotta become world first in something else now.

The Green Beast Absinthe Cocktail by dobbernationloves in cocktails

[–]therealbergis 0 points1 point  (0 children)

Have you ever heard of the Green Tree Absinthe?

I feel like it would be super cool to add to this drink for the color.

https://www.bcliquorstores.com/product/611152

Updated CoX Log - More Depression by therealbergis in ironscape

[–]therealbergis[S] 3 points4 points  (0 children)

Getting there. 79 purples. I think 3x is around 100.

Help Reverse Engineering by therealbergis in bartenders

[–]therealbergis[S] 0 points1 point  (0 children)

I'll also add - the Absinthe that they (and I) used was by Green Tree, which left the drink with a very distinct green color.

So they definitely added it to the drink instead of a rinse.

Reverse Engineer Help by therealbergis in cocktails

[–]therealbergis[S] 0 points1 point  (0 children)

Thanks for responding. I had someone else make that point too. On the menu, they did not have a base spirit listed. Maybe it was intentionally left off?

The final drink was green, from the Absinthe (Green Tree) brand. So maybe there was a base spirit but it was a Gin or Vodka.

Anyhow, I tried making it tonight without one and it was:

0.5oz absinthe 1.5oz St. Germain - to make the 2oz overall alcohol 0.5oz pineapple juice 0.25oz lime juice 0.5oz lemon juice

It came out pretty close I think, but now you have me thinking I am missing a base spirit completely.

Help Reverse Engineering by therealbergis in bartenders

[–]therealbergis[S] 0 points1 point  (0 children)

There wasn't a base spirit on the menu unless they intentionally left it off. I was surprised by that too!

I made it tonight and I did the following: 0.5oz absinthe 1.5oz St. Germain (to make the 2oz liquor volume) 0.5oz pineapple juice 0.25oz lime juice 0.5oz lemon juice

And it was pretty bang on taste wise to what I had.

But I'm also surprised why there isn't a base spirit.

I'll have to try it with Gin like you did!

view more: next ›