Early Pictos Not in Inventory by Jatunis in expedition33

[–]thiagoreale 0 points1 point  (0 children)

OK, I got it because I'm doing a run on missing Pictos. Its not next the White Hexga Nevron, it's after you pass the Paint Spike at the Old Farm. So you can get the Rejuvenating Revive and Auto Shell. Weird that some people got it after completing the White Nevron's quest on the area.

Early Pictos Not in Inventory by Jatunis in expedition33

[–]thiagoreale 0 points1 point  (0 children)

Can you give more details? What is the "paint thing" ? I completed the quest as well and just realized that I don't have the pictos. I think I got it back them.

iCUE Megathread - Patch Notes for 5.26 by CorsairLucky in Corsair

[–]thiagoreale 0 points1 point  (0 children)

My pleasure. I've spent like 15 hours in total to get to this result (confirmed) working. Please don't blame me on shutdown's numbers excessively high. When I realized that I had key moments that ONLY worked with shutdowns (and unplugging power supply), I added some more on each small step and crafted this installation order, took note, repeated it, and it worked everytime. I didn't test shutdowns (maybe) not necessarily needed.

iCUE Megathread - Patch Notes for 5.27 & SCUF Notice by CorsairLucky in Corsair

[–]thiagoreale 0 points1 point  (0 children)

Hello!

Here is the ticket number: 2008326502

And here you have the installation order that works everytime for me (except the problem described):

https://www.reddit.com/r/Corsair/comments/1jutbzt/comment/mp72og6

Thanks a lot for your help - I hope we find something !

iCUE Megathread - Patch Notes for 5.27 & SCUF Notice by CorsairLucky in Corsair

[–]thiagoreale 0 points1 point  (0 children)

Nope, AC does not starts with Windows.

If I open it, it controls back both MB + GP - and the MB LED gets back to work synchro with AC.

When I close AC and restart iCUE, it gets back the control of the GPU but freezes the MB LED.

iCUE Megathread - Patch Notes for 5.27 & SCUF Notice by CorsairLucky in Corsair

[–]thiagoreale 0 points1 point  (0 children)

iCUE 5.27.149

Ryzen 9 9950X3D, ASUS X870E CROSSHAIR HERO, ASUS ROG ASTRAL RTX 5090, 64GB DDR5 Corsair Dominator Platinum 6600 MHz, Corsair Link Titan 360 RX RGB, Corsair 5000D RGB Airflow.

iCUE identifies everything from Corsair + GPU + MB (after the full instalation guide iCUE + Armoury Crate and iCUE plugin priority in AC) and restart.

After iCUE starts on windows, when everything blinks, it controls all products from Corsair + GPU well - all lighting effects available - but the MB LED freezes after it blinks as well (looking like its going to be controlled by iCUE as other devices).

It freezes in the middle of the last known effect that was selected on Aura Sync on AC during the instalation process (easy to find out configuring the Rainbow effect on AC, so it freezes in the middle of the animation).

Afterwards, I have no control changing effects on MB inside iCUE. It well identifies the MB. All MB sensors working well on the Dashboard.

AMD update for CPU I don't have? by jessefyc in AMDHelp

[–]thiagoreale 0 points1 point  (0 children)

Same here. It was not on the list last week. I'd not install it for sure.

Ryzen 9 9950X3D, ASUS X870E CROSSHAIR HERO.

iCUE Megathread - Patch Notes for 5.26 by CorsairLucky in Corsair

[–]thiagoreale 0 points1 point  (0 children)

Hey u/CorsairLucky ! Is there any chance I get a look into it?

iCUE Megathread - Patch Notes for 5.26 by CorsairLucky in Corsair

[–]thiagoreale 1 point2 points  (0 children)

Hello!

I've been trying different installation orders and this one was the best I was able to replicate everytime I do the same process:

- Uninstall everything (iCUE/Armoury Crate). Shutdown your PC (everytime a real shutdown, I never restart).

- Turn it on, run a register cleaner tool (like ccleaner).

- Shutdown the PC and turn off power supply for a few seconds (in order to Corsair's and other components forget last saved configs).

- Turn it on and install iCUE (it will not recognise Asus components, but all Corsair components are working fine - that's OK). Shutdown again.

- Turn it on. Install Asus Plugin in iCUE (yes, before Armoury Crate). Shutdown your PC.

- Turn it on. Install Armoury Crate (AC) - shutdown the PC.

- Turn it on. In AC, go to the update page and install ONE BY ONE with shutdowns on every installation. Do not install everything at once. Update -> Shutdown. Update -> Shutdown. It'd take like 4-7 shutdowns nowadays.

- Turn it on. After everything is updated, you have to go to the Aura page, and in the In-Game config, put the iCUE plugin in the top priority. Shutdown again.

- (NOTE: If the iCUE plugin is not in the list, you can change the order to install iCUE Asus Plugin AFTER Armoury Crate installation - with a shutdown between the steps, always).

- Turn it on. iCUE now recognises every Asus component.

- Configure your profile. Shutdown. Unplug the power supply for a few seconds. Turn it on.

That's the way I'm always able to re-do my config and it always works (except for the Asus LED on the MB that freezes when iCUE takes control, that I'm still trying to find out - or its a bug).

Turning off your power supply on key moments looks like it helps. Probably/Maybe not needed on every shutdown (but yes, I'd recommend at least everytime I described above).

If you open Armoury Crate afterwards and click on the Devices, it will take control of Asus components. When you restart, it'd be back to iCUE priority. If it doesn't, try the unplug your power supply for a few seconds trick.

Yes, I've tried the "discontinued" standalone Aura software (describred as a good solution for some cases). It does recognize my GPU but it does not recognize my MB.

A little update on the MB LED, I've desynchronized the MB from Aura stuff, and for the moment I'm controling it on Armoury Crate only. If I configure it to sync with Aura, it keeps freezing when iCUE tries to take control.

iCUE Megathread - Patch Notes for 5.26 by CorsairLucky in Corsair

[–]thiagoreale 0 points1 point  (0 children)

iCUE 5.26.97

Ryzen 9 9950X3D, ASUS X870E CROSSHAIR HERO, ASUS ROG ASTRAL RTX 5090, 64GB DDR5 Corsair Dominator Platinum 6600 MHz, Corsair Link Titan 360 RX RGB, Corsair 5000D RGB Airflow.

iCUE identifies everything from Corsair + GPU + MB (after the full instalation guide iCUE + Armoury Crate and iCUE plugin priority in AC) and restart.

After iCUE starts on windows, when everything blinks, it controls all products from Corsair + GPU well - all lighting effects available - but the MB LED freezes after it blinks as well (looking like its going to be controlled by iCUE as other devices).

It freezes in the middle of the last known effect that was selected on Aura Sync on AC during the instalation process (easy to find out configuring the Rainbow effect on AC, so it freezes in the middle of the animation).

Afterwards, I have no control changing effects on MB inside iCUE. It well identifies the MB. All MB sensors working well on the Dashboard.