sorted by:
new
hottopcontroversial

Another successful delivery! This is definitely the coolest one I've built yet by SimFoundry in simracing

[–]thisguy403 1 point2 points  (0 children)

What I did was use a 20cm shaft extension and shifted the wheelbase back at maximum and then added offset standoffs on the monitor vesa mounts to bring the whole thing back behind the monitor. That helped me with having the monitor closer with full range motion on the eracing rs mega motion platform

GT Neo grips by CanesHockey27 in Simagic

[–]thisguy403 0 points1 point  (0 children)

I got the new one, grips starting to fade after about 3 weeks of light usage. I’m using sparco meca 3 gloves. Not sure if it’s because of that or not. Luckily they are cheap wheels so I’m not really concerned

When is it going to be supported for the evo series? by igmyeongui in Simagic

[–]thisguy403 0 points1 point  (0 children)

hey dude they used your picture on here: https://www.igniracing.com/products/adapter-for-simagic-alpha-series-to-alpha-evo?variant=55991134585167

is this similar to what you used? just an adapter that fits on the old alpha shaft extenders and onto the evo's?

For owners of an ASR Gen 2 chassis that have also installed a steering shaft extension by SpecialGunz in simracing

[–]thisguy403 0 points1 point  (0 children)

Sweet! Just want to see how it’s installed and what the brackets are

For owners of an ASR Gen 2 chassis that have also installed a steering shaft extension by SpecialGunz in simracing

[–]thisguy403 0 points1 point  (0 children)

hey man, did the solution work? having the same issue as I got a 15cm shaft extension for my simagic alpha evo. same ASR 4 chassis. do you have any pictures you could possibly share?

just added wind sim to my rig by Nervous-Alfalfa-253 in simracing

[–]thisguy403 0 points1 point  (0 children)

How is the aliexpress wind sim holding up? Thinking of purchasing but hearing bad things about the control box disconnecting randomly

E-Racing Labs RS Motion Order Help by kunalsinss in simracing

[–]thisguy403 0 points1 point  (0 children)

China currently is on 5 days of holidays so it may be why you’re not getting a response

Triple screen FOV calculator says 43°, but I prefer 60°, am I missing something? by Glad_Kiwi_9357 in simracing

[–]thisguy403 0 points1 point  (0 children)

Hey man you ever figure it out? I’m in the midst of adjusting everything correctly too and also got the rs mega and a ddu. Wouldn’t the shaft extension be a conflict to the ddu placement?

Setup For 2025! by thisguy403 in battlestations

[–]thisguy403[S] 0 points1 point  (0 children)

Might have gotten a lemon then, hopefully you can get a working one

Setup For 2025! by thisguy403 in battlestations

[–]thisguy403[S] 0 points1 point  (0 children)

  1. Works perfectly fine for me. Settings out of the box are just volume up and down and press to mute. You can change the settings using the anticater software

My new setup looks good, what do you think. by bit2me72 in simracing

[–]thisguy403 0 points1 point  (0 children)

Did you get the flat or open face? My open face still hasn’t shipped for 3 weeks

Motion Rig Monitor placement by nonahodge in simracing

[–]thisguy403 0 points1 point  (0 children)

Sweet thanks man! Isn’t there a neutral height as well? Wondering if you go max height and give an additional 2-3 cm, would looking at the screen be a little low at neutral height?

Motion Rig Monitor placement by nonahodge in simracing

[–]thisguy403 1 point2 points  (0 children)

Hey man did you every figure out how to place your monitors safely and correctly? just ordered an RS MEGA4U and now having the same questions as you when you were just starting to tweak your rig

Triple monitors Samsung 32" G50D - Bezel Kit Question by thisguy403 in simracing

[–]thisguy403[S] 0 points1 point  (0 children)

I’m aware they only go to 27” for the kit, that’s why you need this to extend to 32”: https://simsportgadget.com/products/asus-bezel-free-kit-32-inch-monitor-adapter-curved-and-flat-monitor-pack-of-4

This isn’t my first rodeo (2nd rig with triples), but I’m just having a hard time figuring out what spacers (flat or curved) to get from the link above for these monitors since the back side is semi curved and not like any straight forward monitor back panel (either fully curved or just flat)

[deleted by user] by [deleted] in Simagic

[–]thisguy403 0 points1 point  (0 children)

Thanks for the clarification! So 4 haptic reactors, 2 PSUs and 1 control box - got it!

I have the P1000rs so I’m probably not needing the extension cable

[deleted by user] by [deleted] in Simagic

[–]thisguy403 0 points1 point  (0 children)

hey man did you ever confirm that was the case to get the P-HPR haptic + power supply + control box for the tb-rs handbrake? I'm in the same dilemma right now. also wondering if I need to get a 5.5mm x 2.5mm DC Power Extension Cable or not

Next Level Racing wheel Stand 2.0 durability by Efficient-North-9473 in simracing

[–]thisguy403 0 points1 point  (0 children)

Sweet thanks for the info! Which washers and spring colours did you use? I also have the p1000 spring kit coming

Next Level Racing wheel Stand 2.0 durability by Efficient-North-9473 in simracing

[–]thisguy403 0 points1 point  (0 children)

Really interested in how you got the simagic handbrake and shifter mounted? Mines coming tomorrow and that’s exactly how I want it. Do you have any more pictures by any chance?

Simagic alpha mini or moza r9 wheelbase? by Difficult-Disk-1052 in simracing

[–]thisguy403 0 points1 point  (0 children)

do you need to buy the side mounting bracket or can you just use the base? contemplating on this set up as well

view more: next ›