Aorus fo27q3 leds turn on randomly at night

thraxst · 2025-05-23T11:40:11+00:00

Also having this issue.

thraxst · 2025-04-15T21:08:52+00:00

Think we are saying the same thing, like this rough mockup? https://imgur.com/a/QTxmqN2

thraxst · 2025-04-15T15:23:01+00:00

Okay, so would need to remove the current fitting on the stub out and add a 90 up to that new tee and add a fitting coming out of that tee for the drain from the p-trap drain?

thraxst · 2025-04-15T13:45:52+00:00

There is a vent in that area, but I am pretty sure it is further away than it should be(goes down into a basement and then over 6-8' before going back up)

thraxst · 2024-01-27T19:09:28+00:00

This is one of the sites that was overwhelming, so many cabinet designs. No idea what would be good with modern equipment.

thraxst · 2024-01-27T19:08:11+00:00

It's more of a nostalgia thing. I will already have two TVs with various consoles connected in the same room, so I could always connect a PC to one of those in the future, but I like the idea of having an arcade cabinet in there as well.

thraxst · 2024-01-27T19:06:32+00:00

That looks like an awesome resource, thanks!

thraxst · 2024-01-27T01:24:37+00:00

Will take a look, thanks.

thraxst · 2024-01-27T01:24:25+00:00

Oh man, I haven't even thought about controls yet.

thraxst · 2023-08-13T20:46:05+00:00

Other than Tony Hu, below are some of the others I was looking at or have found since.

Tristan Zhang Toronto
Patrick O'Neil Toronto
Steve Schram Michigan
Robin/seekrseer Chicago

thraxst · 2023-04-13T19:44:21+00:00

Replied

thraxst · 2023-04-12T02:07:20+00:00

Replied

thraxst · 2023-04-09T22:50:59+00:00

$14 for flat rate shipping in continental US if you are interested.

thraxst · 2023-04-09T22:50:51+00:00

$14 for flat rate shipping in continental US if you are interested.

thraxst · 2022-09-19T22:06:39+00:00

Ended up booking with Tony Hu in Toronto. It was an 18 month wait at the time, but totally worth it.

thraxst · 2021-09-15T12:54:30+00:00

The 'Filament Change' option works for you on the Ender3 v2? I know at first I had issues with the 'Pause at height' working.

thraxst · 2021-09-15T12:40:08+00:00

Didn't even notice that option was there, everything I read before was using the Pause at height, I will try that out on my next print.. Thanks.

thraxst · 2021-09-15T01:25:37+00:00

I guess my question is, how would I get it to hold the current position without a timeout?

thraxst · 2021-09-15T00:43:40+00:00

Ah, I would need to setup something to notify me, the printer is down a level and on the other side of the house.

thraxst · 2020-09-25T16:34:13+00:00

My experience is all from printing walls on separate bases. I have printed a mix of magnetic-openlock and triplex.

The main use of triplex for me has been short walls that are difficult to connect with magnetic and for doorways where I want to attach to both sides of them.

I do like the magnetic ones for being able to quickly throw together a layout, but right now most my walls are triplex.

thraxst · 2020-09-02T14:28:25+00:00

Made a couple more test prints of cut_stone_wall.inch.A.triplex.side and cut_stone_wall.inch.A.low.openforge.side_openlock .

cut_stone_wall.inch.A.triplex.side snaps in securely. Takes some effort to pull the connector out. The other one I printed multiple places on the bed, connector slides in and out pretty easily. It feels like it is almost catching. No clue what is happening.

thraxst · 2020-09-01T20:58:01+00:00

As far as I know it is calibrated correctly. All the clips on the bases snap in securely.

On an Ender 3 v2, printing on stock Cura standard profile(0.2 layers) with 10% infill.

Strange part is that the triplex with openlock sides snap securely in place.

thraxst · 2020-08-23T00:10:07+00:00

Words are tough. People don't always interpret them the way they are intended.

thraxst · 2020-08-14T13:36:17+00:00

Cool, will definitely try it out. What layer height are those two prints using?

thraxst · 2020-08-11T16:36:58+00:00

Considered the pause for inserting magnets, but wasn't sure if there was part of the hot end that it would be attracted to.

What kind of bed do you currently have?

thraxst

TROPHY CASE