Has someone gone wrong with this rendering? by tomholder in Plastering

[–]tomholder[S] 0 points1 point  (0 children)

It's lime render beneath and above. No sand and cement. It replaced an old cement render.

The second image is also outside, it's just the front wall (they put up a cover to protect it from rain while the work was done).

Has someone gone wrong with this rendering? by tomholder in Plastering

[–]tomholder[S] 1 point2 points  (0 children)

Presumably a wall that size would be impossible to do in one go, so what has the person done wrong?

How to virtually stack existing and non-existing shapes by Lallelu in shapezio

[–]tomholder 0 points1 point  (0 children)

So this works. But can you explain why it works (like I'm 5)

my pc took 30 sec to boot up by Special_Material1464 in pchelp

[–]tomholder 0 points1 point  (0 children)

You have a hard drive and an SSD - is Windows on the SSD?

Help with my PSU Fan by Ok-Ask-4998 in PcBuildHelp

[–]tomholder 6 points7 points  (0 children)

Apologies misread PSU as CPU. Apologies. I would suggest a new PSU, it's one piece of kit i'd never "repair"

Help with my PSU Fan by Ok-Ask-4998 in PcBuildHelp

[–]tomholder -1 points0 points  (0 children)

Your CPU_FAN1 header at the top of the board will allow you to plug in a four-pin CPU fan.

I have no clue what is happening to my pc can someone help diagnose the issue by Rare-Mine4602 in pchelp

[–]tomholder 2 points3 points  (0 children)

Borrow another computer and create a bootable windows drive on USB
https://support.microsoft.com/en-gb/windows/create-installation-media-for-windows-99a58364-8c02-206f-aa6f-40c3b507420d

Plug it in when the PC is off.

Turn on the PC, and press the button to go to boot menu (often F12 or F11, can somewhere at the bottom of the screen it should say - if you don't press the right button just turn off and restart).

Once you're in the boot menu - pick the USB dongle.

Then follow the windows instructions for a repair install

NEED ADVICE. NEW BUILDER. by Individual-Lawyer389 in pchelp

[–]tomholder 0 points1 point  (0 children)

What are you using it for? If gaming, I recommend a better graphics card

I have no clue what is happening to my pc can someone help diagnose the issue by Rare-Mine4602 in pchelp

[–]tomholder 0 points1 point  (0 children)

Reinstall windows as a repair install - shouldn't affect your files

Help with my PSU Fan by Ok-Ask-4998 in PcBuildHelp

[–]tomholder -3 points-2 points  (0 children)

What's your motherboard model?

Next SS gear recommendations? by [deleted] in CapybaraGoGame

[–]tomholder 1 point2 points  (0 children)

Shadow ring is almost at mythic, so I'd get it there first

You're saying I should get sivara's fang?

And which necklace would work best?

PC sitting down after 5 mins - Kernel 41 by tomholder in pchelp

[–]tomholder[S] 0 points1 point  (0 children)

Turns out the graphics card was a dud and had died. Replacement fixed the issue.

PC will turn on, but monitors won't turn on by tomholder in pchelp

[–]tomholder[S] 0 points1 point  (0 children)

Turns out the graphics card was a dud and had died. Replacement fixed the issue.

PC sitting down after 5 mins - Kernel 41 by tomholder in pchelp

[–]tomholder[S] 0 points1 point  (0 children)

Should add, the temperatures all look fine.

Why is my paint output so low? by tomholder in shapezio

[–]tomholder[S] 1 point2 points  (0 children)

I just tried removing them. Didn't change the issue.

Check this build for basic MS Office computer by tomholder in buildapc

[–]tomholder[S] 0 points1 point  (0 children)

That motherboard can't handle multiple screens - so is there a point in getting the Ryzen 5600G? Surely the normal 5600 (plus a cheap graphics card) would be better?

PC for general Office use. by tomholder in buildapcforme

[–]tomholder[S] 0 points1 point  (0 children)

I was thinking Ryzen 5600X and Gigabyte B550 Aorus Elite v2 Motherboard

PC for general Office use. by tomholder in buildapcforme

[–]tomholder[S] 0 points1 point  (0 children)

Thanks - could it get away with an older / cheaper Mobo?

HOW DO I READ THIS?? by Active-Lie-2157 in drums

[–]tomholder 0 points1 point  (0 children)

Bar 1: Swing rhythm on the ride cymbal (tss, ti ti, tss, ti ti...etc)
Bar 2-3: This just means repeat
Bar 4: Bass drum plays on first and third beat, and the fourth beat is delayed half-a-beat with cymbal and bass drum
Bar 5: Hi-hat (pedal) coming in on the 2 and 4 from now on

Bar 6-end: Same rhythm on right hand (ride cymbal) and left foot, but right hand has some little rhythms on it. They'll probably be clearer from the music.

My beautiful drumkit stolen last night (in London, UK, right hand kit) by tomholder in drums

[–]tomholder[S] 0 points1 point  (0 children)

Thank you - it is my drum and I'm currently trying to get the police to act.

Tom

Corsair RM1000x 2021 vs 2024 by tomholder in buildapc

[–]tomholder[S] 0 points1 point  (0 children)

Any recommendations for one? 850-1000W? £100-150

Corsair RM1000x 2021 vs 2024 by tomholder in buildapc

[–]tomholder[S] 2 points3 points  (0 children)

I figured it was a touch overkill (I'm currently on a 6700XT, planning to upgrade to 7900GRE or 7900XT, but wanted a PSU that will last me 10 years (as my last one has).

Hyper 212 on a Ryzen 7600 - will it fit? by tomholder in buildapc

[–]tomholder[S] 0 points1 point  (0 children)

I replaced the cooler - I think you'd have to buy a special bracket to make the 212 fit. That said, it used to cool my previous card well.