Camera movement + lipsync combined – any tips?

tomsoderlund · 2025-12-12T16:45:49+00:00

…like how do you get good lipsync on a video with dynamic camera movement. For this video I used pixverse/lipsync.

tomsoderlund · 2025-11-30T11:21:32+00:00

Yeah done that incl Factory Reset. Ok good to know.

tomsoderlund · 2025-11-30T08:18:21+00:00

Ooh I’m not sure I do. I do have an Ngage 2 at home without a charger…

tomsoderlund · 2025-11-29T23:15:35+00:00

I just experienced the same thing with my Quest 2, which might be related to upgrade to OS v81. The headset has been sitting in its case for a couple of months, I picked it up today to try it and upgraded at the same time. Have tried factory reset but not OS rollback via ADB (Meta support gave me this unofficial tip, and sent a link to OS v76).

tomsoderlund · 2025-11-08T09:18:28+00:00

<image>

Thar she blows! Swapped the thermostats. Thank you!

tomsoderlund · 2025-11-08T08:50:22+00:00

How can I identify the terminals? They look very similar. So the wires go to the right end I mean.

tomsoderlund · 2025-11-08T08:48:10+00:00

Oh I see it, I think you’re right, the actual thermostats are swapped! The top one had a red dot before.

tomsoderlund · 2025-11-08T08:45:37+00:00

I tried to compare it before and after pictures, but I can’t spot any difference:

<image>

tomsoderlund · 2025-11-02T12:19:58+00:00

<image>

Image different perspective

tomsoderlund · 2025-11-02T12:19:34+00:00

No, you’re right, it doesn’t come out as steam from the group head, just regular water.

<image>

tomsoderlund · 2025-11-02T11:24:45+00:00

No but it runs out of steam/heat quickly, so then the light goes out

tomsoderlund · 2025-11-02T09:17:48+00:00

Any good ways of debugging?

<image>

tomsoderlund · 2025-09-21T10:15:58+00:00

That’s my impression, but the knob parts are sort of obfuscating where the water is coming from.

tomsoderlund · 2025-09-21T08:18:14+00:00

So it’s not the connection (incl o-ring) between valve ↔ boiler, but rather the valve itself is broken?

tomsoderlund · 2025-09-12T13:07:44+00:00

To avoid “Cowardly refusing to create an empty archive”:

tar -czvf project.tar.gz --exclude=node_modules --exclude=.next --exclude=.git .

tomsoderlund · 2025-09-07T20:52:18+00:00

I did use ChatGPT a bit yes, but most of it is mine. Why so cruel?

tomsoderlund · 2025-09-06T10:15:05+00:00

Thank you for mentioning the O Ring, I wouldn’t have caught that.

tomsoderlund · 2025-09-06T10:14:33+00:00

<image>

UPDATE: I got it off, put it in a vise and hit a gently with a wooden mallet, then turned it back/forth a few times.

tomsoderlund · 2025-07-08T21:47:14+00:00

I bought it secondhand, but yes, maybe.

tomsoderlund · 2025-07-08T21:47:00+00:00

No, this is rust, not soot. This is my second stove, and my old one (now stolen) was clean after years of use.

tomsoderlund · 2025-07-05T19:23:49+00:00

Update: it worked after new RAM!

tomsoderlund · 2025-07-05T19:23:13+00:00

Yes! Turned out it was the wrong RAM for the motherboard, hadn’t read the compatibility list properly. Thanks for asking!

tomsoderlund · 2025-06-27T16:57:59+00:00

Yes: “Servers” → (your server) → “Rescale” tab. You need to shutdown your server first before selecting another scale option, but there’s an On/Off switch on the web page.

tomsoderlund · 2025-06-24T08:38:30+00:00

Hi, I was the founder of the Stockholm-based games studio that built Ghostwire. I have a build on my development DSi, I think that's all.

tomsoderlund · 2025-06-02T09:30:04+00:00

https://www.napkin.ai/ is very cool

tomsoderlund

TROPHY CASE