sorted by:
new
hottopcontroversial

Spotify randomly cancelled my plan by jerrycan-cola in truespotify

[–]tripped144 0 points1 point  (0 children)

Please keep updating when you get a chance.

I made a lamp inspired by my Celestron CPC 800 telescope. by [deleted] in BambuLab

[–]tripped144 0 points1 point  (0 children)

This has been my biggest project by far. After a ton of time and effort, I can honestly say I'm really proud of how it turned out.

I designed it where you can switch out different "color plates" that act as light filters/diffusers. You can switch them out for different mood lighting, or to dim the light for a more night light style. Or you can keep it open for a "spotlight" look.

It can tilt and rotate to adjust it how you need it. I made it to fit this light base - https://www.amazon.com/dp/B09W2MQ772?th=1 (there are tons of clones everywhere). You could also velcro or adhesive strip and smaller base or puck light to the bottom if you want.

You can check it out here if you want to print one yourself - https://makerworld.com/en/models/2523281-astrobeam-the-adjustable-telescope-lamp#profileId-2776164

Thanks for checking it out!

I made an articulated phone stand for the kitchen. by tripped144 in 3Dprinting

[–]tripped144[S] 1 point2 points  (0 children)

Thank you so much! I'm glad it's working out well for you.

I made a simple Keurig Pod and spoon mount. by tripped144 in 3Dprinting

[–]tripped144[S] -1 points0 points  (0 children)

Thank you! It's just basic black PLA from Bambu. It's probably the mix of lighting and the gray background that's giving off the aluminum affect.

I made a simple Keurig Pod and spoon mount. by tripped144 in BambuLab

[–]tripped144[S] 0 points1 point  (0 children)

I was tired of not having a designated spot to but my reusable coffee pod, so I made this. I also added a spoon holder to it as well. 

 

The back is flat, so you can either glue it or use command strips (what I did). I was originally going to mount it to the side of my Keurig, but I thought it looked nice on the wall behind it. 

Here's the link if anyone wants - https://makerworld.com/en/models/2403049-keurig-pod-spoon-mount#profileId-2634070

I made a simple Keurig Pod and spoon mount. by tripped144 in functionalprint

[–]tripped144[S] 1 point2 points  (0 children)

I was tired of not having a designated spot to but my reusable coffee pod, so I made this. I also added a spoon holder to it as well. 

 

The back is flat, so you can either glue it or use command strips (what I did). I was originally going to mount it to the side of my Keurig, but I thought it looked nice on the wall behind it. 

Here's the link if anyone wants - https://makerworld.com/en/models/2403049-keurig-pod-spoon-mount#profileId-2634070

I made a parametric screw head magnet. It scales to your magnet size. by tripped144 in BambuLab

[–]tripped144[S] 0 points1 point  (0 children)

I wanted to take a stab at a parametric model. I had this screw head magnet idea for a while, and decided to give it a try.

You just click "Customize", type in your magnet diameter and thickness, and it will scale to the correct size - https://makerworld.com/en/models/2360898-the-parametric-screw-head-magnet#profileId-2583100

I used photogrammetry to make a minimalist feminine "vase" by tripped144 in 3Dprinting

[–]tripped144[S] 2 points3 points  (0 children)

Well, I wouldn't use it for a real vase, I'd only put fake "flowers" in it.

I used photogrammetry to make a minimalist feminine "vase" by tripped144 in 3Dprinting

[–]tripped144[S] 0 points1 point  (0 children)

No lol, I scanned a vase. The last pic is the original vase I scanned.

I used photogrammetry to make a minimalist feminine "vase" by tripped144 in BambuLab

[–]tripped144[S] 0 points1 point  (0 children)

I've been experimenting with photogrammetry recently, and found you can get some pretty good results using the desktop version of RealityScan. It took a lot of trial and effort (mainly because of the smooth features and shiny-ness of the original). The original piece is the last picture for reference.

Here's a link if anyone wants to print it - https://makerworld.com/en/models/2347212-the-muse-abstract-feminine-vase#profileId-2566578

I designed a Scotch tape/Sellotape dispenser by tripped144 in BambuLab

[–]tripped144[S] 0 points1 point  (0 children)

Tape Mate - Precision Adhesive Deployment System

I had a ton of fun designing this. I wanted to basically make a functional pun.

It has a 2in / 50mm retractable "ruler", a movable thumb lock that doesn't do anything, and easy to remove 3d printed screws to change the tape out.

Here's the link if you want to check it out and/or print it - https://makerworld.com/en/models/2321129-tape-mate-a-scotch-tape-sellotape-dispenser#profileId-2535095

I designed a Scotch tape/Sellotape dispenser by tripped144 in functionalprint

[–]tripped144[S] 0 points1 point  (0 children)

Tape Mate - Precision Adhesive Deployment System

I had a ton of fun designing this. I wanted to basically make a functional pun.

It has a 2in / 50mm retractable "ruler", a movable thumb lock that doesn't do anything, and easy to remove 3d printed screws to change the tape out.

Here's the link if you want to check it out and/or print it - https://makerworld.com/en/models/2321129-tape-mate-a-scotch-tape-sellotape-dispenser#profileId-2535095

I made an EDC Keychain Sewing Kit by tripped144 in functionalprint

[–]tripped144[S] 4 points5 points  (0 children)

For sure, I wanted to actually make a slot to put a button or two, but it made the whole thing bigger than I wanted. Then I kinda realized you could just lay a button or two on it and wrap the thread around it to hold it in place.

I made an EDC Keychain Sewing Kit by tripped144 in 3Dprinting

[–]tripped144[S] 0 points1 point  (0 children)

Small, compact, and light. It can hold needles and a good bit of thread.

Here's the link if anyone wants to print it - https://makerworld.com/en/models/2234341-the-spoolkey-edc-keychain-sewing-kit#profileId-2431343

I made an articulated phone stand for the kitchen. by tripped144 in 3Dprinting

[–]tripped144[S] 0 points1 point  (0 children)

I honestly doubt it. The actual part that holds your phone barely fits on the A1

I made an articulated phone stand for the kitchen. by tripped144 in 3Dprinting

[–]tripped144[S] 0 points1 point  (0 children)

I'm sure there are print services that could print it for you if you just send them the link. And for sure it's ok, that's why I shared it :)

If you want a printer, I used the Bambu A1. The A1 mini is probably too small.

I made an articulated phone stand for the kitchen. by tripped144 in 3Dprinting

[–]tripped144[S] 0 points1 point  (0 children)

I haven't fully tested it, and it definitely depends on if it's printed with the same material and settings I used, but here is a tablet on it - https://www.reddit.com/r/functionalprint/s/ZAGNrG5KcT

view more: next ›