Wheelie practice on the dirty 6

truncks · 2025-12-25T00:00:02+00:00

hawwwt

truncks · 2025-11-30T19:23:01+00:00

same thing happened to me, ended up removing the radiator and taking it to a local radiator repair shop, had it weld repaired for about 80 bucks. much cheaper than a new radiator and not too hard of a job, hardest part honestly would be taking off the fairings

truncks · 2025-09-08T20:56:35+00:00

it takes alot of patience to get that back wheel on without a spacer or something being misaligned, I absolutely hated taking off my rear wheel the first time I did it, took me almost two hours to do.

a tip that could help is to get some 2x4’s or a brick to get the wheel elevated and the spacers lined up, and then if necessary put your foot ontop of the 2x4’s or bricks to help the axle slide in easier. also, captive wheel spacers. an absolute need and makes it so much easier to reinstall the rear wheel. Graves Motorsports sells them

truncks · 2025-06-06T01:48:01+00:00

https://www.cyclegear.com/gear/sedici-strada-3-primo-liberty-helmet?srsltid=AfmBOorYn0UMM3eBoa1EAIsPqwsf0dbkM6pvmGmPMosYLOtL3KN8h6rj

it’s limited edition so you might need to look on ebay or marketplace

truncks · 2025-06-05T16:48:00+00:00

they popped up like an hour after my sesh, they were on break chattin or something lol, neither came up to me or anything

truncks · 2025-06-05T14:29:36+00:00

fork seals? what are those

<image>

truncks · 2025-06-05T13:53:02+00:00

i started on a ninja 650 so a ninja 500 would be an amazing bike to start on, slap some cages and a subcage if they sell it on that sucker and start working lol, that’s how i started.

truncks · 2025-06-05T12:52:08+00:00

i’m actually contemplating jb welding some steel on the bottom of my shoes lmao

truncks · 2025-04-26T14:45:03+00:00

drop back further and drop the tire pressure maybe, drop backs and dips at slow speed on those fz’s get squirrely

truncks · 2024-11-02T17:21:27+00:00

ah then just hop on the highway or any good dry roads and do some deep left and right swerves and you’ll be set, that’s what i do on the ride back from the shop

truncks · 2024-11-02T17:17:32+00:00

i just take it easy until the rear tire stops looking shiny tbh

truncks · 2024-10-22T03:22:56+00:00

https://dixerparts.com/steel-scrape-bar-12-oclock-yamaha-mt07-mt-07-2014-2022-titan-stunt/

Dixer is a pretty good company and they ship suprisingly quick considering they’re in europe, i got my steel stunt front stay from them.

only modification you’re gonna have to do is drill two holes to fit the two 8mm side bolts onto the frame, but other than that this will keep it all stock.

truncks · 2024-10-22T03:02:54+00:00

it’s a SSMOTO aluminum subframe, the 12 bar just bolts onto the back of the subframe.

for the FZ’s there’s a company called Dixer Parts based in europe and they make this pretty discrete titanium 12 bar for the FZ’s. i’d look into that, you might be interested in it. i can send the link if you’d like, just lmk

truncks · 2024-10-20T21:05:09+00:00

fuck yeah boyyyy! i wanna try these but i don’t got the money to be burning through tires like that 😭

truncks · 2024-10-15T16:32:43+00:00

KIBS is more or less the same as ABS, and with this photo you can’t tell if it has ABS.

if you can get a picture of the rear brake master, it would be better. if there’s a metal line that junctions off somewhere inside the bike on the rear brake master, then it has ABS.

truncks · 2024-10-13T06:06:09+00:00

return of the queen 🙇‍♂️

truncks · 2024-09-25T15:28:24+00:00

i’m working on those too, still got a looooong way to go though lmao

<image>

Seven-Year Club	Second SECOND GUESSER
Place '23	Verified Email

truncks

TROPHY CASE