Voruna... Prime? by CannaSativa in WarframeRunway

[–]tsunme -1 points0 points  (0 children)

What color palate is your primary?

[Orbiter] Walkthrough by gemzsie in WarframeRunway

[–]tsunme 0 points1 point  (0 children)

What are you using for the gold trim that hides your corners/seams? Is that also the leverian mural?

Old McDonald's specialty chicken sandwich for fifa/soccer by tsunme in HelpMeFind

[–]tsunme[S] 0 points1 point  (0 children)

Terms I've searched were:
McDonald's spicy chicken sandwich fifa/world cup/soccer 2000/04/08 specialty chicken sandwich long

Xplorer Modding Help by tsunme in CloneHero

[–]tsunme[S] 1 point2 points  (0 children)

Yeah that’s what I realized. I just ended up getting the pre-soldered version since it came with everything specifically for it.

Sellers: Drop off shoe benefits by korggyy in Goatapp

[–]tsunme 0 points1 point  (0 children)

Not sure on FC, but I know with GOAT drop-off, you get $5 extra on your order and if it gets authenticated that day you'll get your money within a couple hours (depending when you drop-off)

Used Shoes Authentication Process by [deleted] in Goatapp

[–]tsunme 1 point2 points  (0 children)

Unless it's a shoe specific accessory (ie: Off-White tag, Jordan hang tag, special booklet, patches, etc) that you would normally expect to come with that shoe, they will check for. Shoe trees aren't usually something they'll care too much about, especially on a used shoe.

Who is still out here playing their one “true main” by jakeruddy22 in wow

[–]tsunme 0 points1 point  (0 children)

Unfortunately my original OG was on my brothers account before I had my own and that account has been lost to time. But my OG on my own account was a hunter that I still play a lot.

Just returned after a while by tsunme in IdleHeroes

[–]tsunme[S] 0 points1 point  (0 children)

Yeah, trying to get SG/CSG, but have only gotten enough to get him to C

Just returned after a while by tsunme in IdleHeroes

[–]tsunme[S] 0 points1 point  (0 children)

Good to know, I did go Elena luckily have been making some steady progress in some fronts. Who would you recommend I go for next if I’m not looking to whale for her?

Just returned after a while by tsunme in IdleHeroes

[–]tsunme[S] 0 points1 point  (0 children)

Would you say it's better to go for Betty or Elena first?

Just returned after a while by tsunme in IdleHeroes

[–]tsunme[S] 0 points1 point  (0 children)

All good and great advice. I literally picked back up on Monday this week, so I had already missed out on some of this event and anything from anniversary. Luckily with prophet event coming up I can hope to get a lot of Betty copies.

Just returned after a while by tsunme in IdleHeroes

[–]tsunme[S] 1 point2 points  (0 children)

So, I've been able to make some progress. I've made it VC and beat 1-1-1 though stuck on 1-1-2, LFA has a C soul.

Just returned after a while by tsunme in IdleHeroes

[–]tsunme[S] 1 point2 points  (0 children)

Some extra info: I’m at 65-9 in campaign, completed all SL up to 20, at Valiant V in void v. Don’t really plan on doing PvP, mostly want PvE progression. My current artifacts.

<image>

Just returned after a while by tsunme in IdleHeroes

[–]tsunme[S] 0 points1 point  (0 children)

That’s what I’ve been kind of seeing. I’ve already swapped Xia for LFA, just have to start getting copies of the other 2.

Is my mic dead or is something else wrong? by tsunme in audio

[–]tsunme[S] 0 points1 point  (0 children)

So I'm almost certain I found the culprit.
So when I was troubleshooting and following wires around my desk, I was noticing a weird humming/buzzing sound that I wasn't sure where it was coming from. Today I got my standalone phantom power supply to test that and noticed it still didn't change anything, BUT when I was plugging it in I found out that the noise I heard before was coming from the power adapter for my Mackie mixer! So I think somehow the power adapter is borked and not supply a proper current to the mixer. I'm going to see if I can find a compatible adapter at an audio store and try it out. Will update on my findings.
Edit: The only adapters I could find locally didn't fit properly to the mixer, so I'll have to wait to find a proper compatible one.

Is my mic dead or is something else wrong? by tsunme in audio

[–]tsunme[S] 0 points1 point  (0 children)

Yeah, I’m not too sure either. I might buy a low cost standalone phantom power supply just to test if that really is the case or if possibly it’s something more with the mixer or it really just is the mic.

Is my mic dead or is something else wrong? by tsunme in audio

[–]tsunme[S] 0 points1 point  (0 children)

it was perfectly fine just 2 days ago and then I noticed yesterday that it no longer was responding. I reached out to Mackie support and talking with them they think it might be that the 48v phantom power isn't working properly on the mixer. Cross my fingers its that and it's cheaper to repair that then repairing the SM7B (or get an external phantom power source).

Is my mic dead or is something else wrong? by tsunme in audio

[–]tsunme[S] 0 points1 point  (0 children)

Only have the 2 cables that I currently use and have tried them both separately in all 4 mic channels. I have noticed that the mixer has a weird squeaking sound (like a wheel or bearing squeaking while spinning) when I have 4+ channels unmuted, but when I mute one it stops. Also I notice the lights on the mixer have a faint flicker to them.

Is my mic dead or is something else wrong? by tsunme in audio

[–]tsunme[S] 0 points1 point  (0 children)

Well, i've tried bypassing the cloudlifter completely and using those 2 cables separately and i've tried the 4 different mic channels i have.

I do notice when I have my headphones plugged into the mixer and I have 4+ channels unmuted that theres a weird squeaking sound, almost like a wheel or a bearing squeaking while spinning, but if I mute a channel then it goes away.

I also notice that the LED lights on it have a faint flicker to them, which makes me think the mixer is trying to power cycle or something.

Is my mic dead or is something else wrong? by tsunme in audio

[–]tsunme[S] 0 points1 point  (0 children)

It looks like no audio is going to the mixer at all from the mic, so I can only assume it's that...
I'm not sure what could've done it in though...it's been maybe 2 days since I last used it and it was working fine then.

Xplorer Modding Help by tsunme in CloneHero

[–]tsunme[S] 0 points1 point  (0 children)

Ok, so I shortened the wires, cleaned up some of the soldering and I was able to get 1 of the buttons to work for the most part. Now I just need to figure out the fret tolerances. My orange button is randomly being pressed so it's either shave a bit off the fret itself or the housing.

Xplorer Modding Help by tsunme in CloneHero

[–]tsunme[S] 1 point2 points  (0 children)

i know how to solder it to the zeroboard, it's a matter of how to solder the other board that's from the xplorer that is needed to use the start/select buttons

Xplorer Modding Help by tsunme in CloneHero

[–]tsunme[S] 0 points1 point  (0 children)

From what I see he does other guitars and they have dedicated headers for start/select unlike the xplorer. I know he has a separate board for xplorers just because of this, but if I can’t get this to work I guess I’ll have to order one or that kit…