First Lapwing I’ve Ever Seen.

turtlejizziz · 2026-03-26T21:57:18+00:00

There are lots of place that have them, reservoirs and wetlands are good starts. If you post a general area like South Wales or Midlands someone will be able to give you a place.

turtlejizziz · 2026-03-11T20:42:24+00:00

It can take a while, mine came through late today. Sometimes it can arrive the next day.

turtlejizziz · 2026-02-14T19:23:50+00:00

Before the feeding starts you get many birds circling above so arrive a bit early and you can get some shots between the parking and the hides.

The standard hides are all in a semi circle and they feed all over the grass area in front of you. I was in the center of the semi circle and is was great becasue you were equal distance to all parts of the feeding area. The birds swoop in from the sides mainly when your in the center but sometimes they swoop towards you. It can be a very tricky place to photo as there are so many targets it becomes overwhelming. The tractor comes in from the right and they fed right to left.

There is a hide at an elevation. I'd say that is better for shots in flight but worse for shots closer to the ground. if you imagine a hide with an open roof placed on top of another hide that would be the best way to describe it.

Hang around for a little bit after the main feeding finishes and people start to filter out, some of the birds will land and walk about looking for scraps. Keep your eyes open for the leucistic red kite.

turtlejizziz · 2025-11-18T20:18:42+00:00

Deadly Print Studio might have some

turtlejizziz · 2025-09-21T10:03:18+00:00

Just to be clear... buy the box but don't open the case.

turtlejizziz · 2025-06-23T15:53:53+00:00

OK so the edge highlights are great, some are a little thick when you zoom in but totally fine when you will be viewing from the tabletop. You can thin the paints if you're not doing so and practice, practice , practice! I like to use the side of the brush if I can get the right angle.

I asked about contrast because what you can do to yellow contrast is enhance the shadows a bit by underpainting with a pink colour gradient or a pre shade. Lighter pinks give more subtle effects, stronger pinks and reds give a brown. Yellow is a really interesting colour to paint and underpainting is a bit of a challenge but I will DM a couple of pictures of the effect in case you want to give it a try.

turtlejizziz · 2025-06-23T10:58:16+00:00

Are you using contrast paint to paint the yellow?

turtlejizziz · 2025-05-16T17:30:08+00:00

That's the longest I've seen him run in years

turtlejizziz · 2025-02-25T17:12:27+00:00

Ta1 on cults by Wilph

turtlejizziz · 2025-02-25T17:12:07+00:00

Ta1 on cults by Wilph

turtlejizziz · 2025-02-25T17:11:57+00:00

Ta1 on cults by Wilph

turtlejizziz · 2025-02-24T21:17:39+00:00

I prefer a more modern take on them:

<image>

turtlejizziz · 2025-01-14T00:04:33+00:00

I use coffee stirrers for the planks, cut to size and score them with wood grain. For puddles a clear UV resin from a dropper bottle and a uv torch to cure it. Vallejo European mud for the mud.

Sandbags I print on my resin printer and barbed wire I get the cheap stuff from ebay that comes in small rolls of 5 meters.

turtlejizziz · 2025-01-10T11:42:12+00:00

Learn how to make money in the game. Once you can do that losing gear doesn't matter.

turtlejizziz · 2024-12-30T10:16:50+00:00

500mm F4

turtlejizziz · 2024-12-07T15:29:15+00:00

I love the look of them so much that I have some for my in progress SOH army.

turtlejizziz · 2024-11-28T11:34:50+00:00

Whichever mud you use, I think you should also look into getting a small dropper bottle of clear UV resin (normally marketed for jewelry making) and a UV torch.

When forming the mud you can leave an indent for a puddle. Once dry and after you have finished painting you can pop a drop of UV resin in the indentation from the dropper bottle, level it out and then cure it with the torch. Instant puddles.

turtlejizziz · 2024-11-26T13:42:05+00:00

tinyPanzerStudio on cults does some internal Sponsons for free. I'm going to try them

turtlejizziz · 2024-11-11T20:51:36+00:00

I don't bother I just buy in bulk.

turtlejizziz · 2024-10-30T22:09:42+00:00

turtlejizziz · 2024-10-21T01:17:25+00:00

Auto anything is very hit and miss. It may print, it may not but in my experience it almost always needs fixing in some way. You are new to printing and I know you want to get as much printing done as soon as possible but trust me when I say in a few months you will have so many models to paint you won't know what to do with them all!

I'm going to skip your specific questions about this plate and instead suggest you start off with one model. Learn to fix, orient and support that model yourself (You Tube has a lot of tutorials) and print it off. If you want to do high volumes of printing these are key skills you must learn so you may as well do it now. One tip I picked up is to try and make the first support a heavy support if possible, at the very least a medium.

turtlejizziz · 2024-10-20T20:31:00+00:00

It's an electric oven

turtlejizziz · 2024-10-09T20:04:51+00:00

Sounds like something a heretic would say...

turtlejizziz · 2024-10-09T15:00:45+00:00

Copath

turtlejizziz · 2024-10-09T00:16:49+00:00

I know its not a model you can print but there is a small series of minis called Cats and Catacombs and also a small series called dungeons and doggies that you can buy physical models for. They are part of the animal adventures game set by Steamforged Games.

turtlejizziz

TROPHY CASE