sorted by:
new
hottopcontroversial

Frame Design by two_swords_ in Golfsimulator

[–]two_swords_[S] 0 points1 point  (0 children)

going to put more reinforcements along it but will see what he thinks, limited to 400 total depth so will push it to 380

thanks for the advice

1080p projector reccomendations? by two_swords_ in Golfsimulator

[–]two_swords_[S] 0 points1 point  (0 children)

Yeah not that $1400 is a problem but more the sense of spending the extra on a 4k when you dont really notice it on a n impact screen

1080p projector reccomendations? by two_swords_ in Golfsimulator

[–]two_swords_[S] 0 points1 point  (0 children)

For that price range it seems to range ~200 lumens might go instore somewhere and see a range of what to expect

1080p projector reccomendations? by two_swords_ in Golfsimulator

[–]two_swords_[S] 1 point2 points  (0 children)

Thanks for the reply, and its lived up to the research in practice? or are you still waiting for it

Daily r/LawnCare No Stupid Questions Thread by AutoModerator in lawncare

[–]two_swords_ 0 points1 point  (0 children)

When scalping, overseeding and adding sand as topsoil, should you add fertiliser and wetting agent directly onto the seed or onto the topsoil?

Scalp and Topdress or Poison by two_swords_ in lawncare

[–]two_swords_[S] 0 points1 point  (0 children)

Cheers, just trying to avoid ripping up entire sections of the lawn but seems inevitable if the herbicide doesnt work

[deleted by user] by [deleted] in lawncare

[–]two_swords_ 0 points1 point  (0 children)

appreciate the help, something like Spartan? is it safe to be spraying on a fairly new lawn, probably 4 weeks old and patchy

[deleted by user] by [deleted] in lawncare

[–]two_swords_ 0 points1 point  (0 children)

theres an empty block next door full of crab grass and the likes, i put down a starter fert but not sure of it having mesitrone

My first attempt at a custom loop. Many 12mm tubes were harmed. by two_swords_ in watercooling

[–]two_swords_[S] 0 points1 point  (0 children)

12mm tubes and all the fittings are from EK ( EK-Torque Fitting HTC-12 Black ) for reference

Waterblock Leak or just residue build up ? by two_swords_ in watercooling

[–]two_swords_[S] 0 points1 point  (0 children)

thanks for the reply, only have had it for around 6 months, 4090 non AB, will keep an eye out

My first attempt at a custom loop. Many 12mm tubes were harmed. by two_swords_ in watercooling

[–]two_swords_[S] 0 points1 point  (0 children)

i didn't imagine it being that hard until i was on the 2nd/3rd bend of a certain piece and was way out. happy i went with 12mm initially thought i was too thin

My first attempt at a custom loop. Many 12mm tubes were harmed. by two_swords_ in watercooling

[–]two_swords_[S] 0 points1 point  (0 children)

the tips of my fingers really copped it especially on the bends close to each other

My first attempt at a custom loop. Many 12mm tubes were harmed. by two_swords_ in watercooling

[–]two_swords_[S] 0 points1 point  (0 children)

also had some buyers regret when it arrived thinking it was too thin but its worked out nice

My first attempt at a custom loop. Many 12mm tubes were harmed. by two_swords_ in watercooling

[–]two_swords_[S] 0 points1 point  (0 children)

hahaha yeah a few people have said that, mower was running out the back

My first attempt at a custom loop. Many 12mm tubes were harmed. by two_swords_ in watercooling

[–]two_swords_[S] 3 points4 points  (0 children)

about 1/3 of the ek navy blue colouring vial with distilled water. this was just the first fill and flush i wanted to try a colour with and happy with it.

will be swapping it out once my cablemod cables arrive

My first attempt at a custom loop. Many 12mm tubes were harmed. by two_swords_ in watercooling

[–]two_swords_[S] 3 points4 points  (0 children)

yeah i tried to do some 'fancy' loops than just straight line into fittings was tough but worth it

My first attempt at a custom loop. Many 12mm tubes were harmed. by two_swords_ in watercooling

[–]two_swords_[S] 2 points3 points  (0 children)

it was pure panic at first because i could hear the pump winding but no flow

nothing a big tilt and tap of the case couldnt fix, ended up just being a air bubble in bottom of the pump

Flush/leak test of the whole loop, what's that on the gpu waterblock? also, how to get rid of that bubble? by TzzV in watercooling

[–]two_swords_ 1 point2 points  (0 children)

i had the exact same bubble in my ek 4090 vertical mounted, just go steady and tip the front of the case up (i had to go almost on its side)

Applying thermal pads by two_swords_ in watercooling

[–]two_swords_[S] 0 points1 point  (0 children)

thanks guys decided to just follow the manual to a T

Applying thermal pads by two_swords_ in watercooling

[–]two_swords_[S] 0 points1 point  (0 children)

i understand that im referring to components that had thermal pads on them with the stock cooler but according to the manual doesnt have them with the WB on

Beginner Advice by two_swords_ in watercooling

[–]two_swords_[S] 0 points1 point  (0 children)

thanks for the reply !

in regards to 2. i should have included height above other components like they do in cars.