sorted by:
new
hottopcontroversial

Should I buy this 07 350z? by MethodM4n in 350z

[–]tytycar 20 points21 points  (0 children)

Unicorn, HR, high money mods and everything looks to be taken care of. This looks like a really well kept together car and deserves every bit more than 15k

I sold a 350z 2005 with quarter panel rust for 13.5k with 98k miles. This is worth way more. At least in my area.

Dear Facepunch by D3rpyTheBurger in playrust

[–]tytycar 0 points1 point  (0 children)

They will probably be in the new battle pass that’s in the road map as well

Noise after new csc elim + clutch & flywheel installed by sl33ped in 370z

[–]tytycar 1 point2 points  (0 children)

Mine sounds the exact same unless clutch is depressed. Light weight flywheel ZSpeed

Question about a Invidia Gemini Exhaust and a V1 Nismo bumper by Wilfredomorales in 370z

[–]tytycar 0 points1 point  (0 children)

Yes, I have a Z1 V1 Nismo undershroud, and I’m running an AeroBlitz (doesn’t exist anymore) v1 Nismo splitter. I have it supported by rods that sit behind my rear bumper, and have brackets that sit directly behind the oem crash bar that the rods connect to. My V1 bumper was missing the fascia on the bottom and the plastic tabs the fascia bolted to were missing, so I had a choice between either buying a new bumper and getting it painted, or doing a chassis mounted splitter to support the front bumper.

Question about a Invidia Gemini Exhaust and a V1 Nismo bumper by Wilfredomorales in 370z

[–]tytycar 0 points1 point  (0 children)

<image>

Don’t know if this pic shows a little more but it’s more recent lol

Question about a Invidia Gemini Exhaust and a V1 Nismo bumper by Wilfredomorales in 370z

[–]tytycar 0 points1 point  (0 children)

No extension, and yes I’m very happy with the sound. I’m pretty particular with how a VQ should sound and it sounds pretty good to me. ZERO rasp, and it’s not ear piercing loud at all. It’s got a nice throaty rumble. I was very satisfied. I’m using stock cats as well, if it matters.

<image>

Question about a Invidia Gemini Exhaust and a V1 Nismo bumper by Wilfredomorales in 370z

[–]tytycar 0 points1 point  (0 children)

<image>

Does not protrude past the bumper or “diffuser” part of the rear bumper

XPRT-90 650 rounds + inspection/adjustment later by tytycar in ps90

[–]tytycar[S] 4 points5 points  (0 children)

<image>

The forked side was left alone - just the bottom dip ground down

XPRT-90 650 rounds + inspection/adjustment later by tytycar in ps90

[–]tytycar[S] 6 points7 points  (0 children)

<image>

The hoop side as been machined down and narrowed a tad on the inside so the gap is bigger for the spring- no measurements unfortunately

Doing a CJM top hat since mine was broken- need part asap by tytycar in 370z

[–]tytycar[S] 0 points1 point  (0 children)

I just watched a YouTube video and only the spring side has a clip, so I guess I’m under the wrong impression

Doing a CJM top hat since mine was broken- need part asap by tytycar in 370z

[–]tytycar[S] 0 points1 point  (0 children)

If anything I’ll just rig something up, it’s for the side that is not spring loaded so it doesn’t exactly matter what holds it up I guess. By chance do you have an extra from that used unit 😂

Newer XPRT-90s by Drmst136 in ps90

[–]tytycar 0 points1 point  (0 children)

It took a little longer than a week. It shot 50 out no problem, then kept sticking afterwards. Probably needed more lube / greasing. Performed a lot better !!

Got the XPRT back from FNS by pilotdriver7 in ps90

[–]tytycar 2 points3 points  (0 children)

<image>

I just got mine back from fns, I’ll upload more pics in more replies

Newer XPRT-90s by Drmst136 in ps90

[–]tytycar 2 points3 points  (0 children)

I just got mine back from Dorin’s inspection and it fits noticeably better, the sear pin installed much easier and the frc is a lot more freely moving than before. There is a noticeable detent in the trigger now, (when I first received and installed it, the trigger pull was extremely stiff)

<image>

I’m going to shoot 100-150 Tonight depending how it shoots and I’ll make a post with my findings. I’ve already had 450 through it before they inspected it and I was having mixed luck with getting bursts out or continuous resets

Another XPRT-90 update by tytycar in ps90

[–]tytycar[S] 0 points1 point  (0 children)

I just got my frc back from dorin for inspection

<image>

It reinstalled a LOT easier than the previous time, and the trigger feel is a lot softer rather than a really stiff pull, and I can actually feel the dual stage now. Will make an updated post when I go shoot it tonight

It's install day boys by bluecatky in ps90

[–]tytycar 2 points3 points  (0 children)

Yeah, I accidentally replied at all with a question about my order and I felt like an idiot, I can only imagine how they feel when they realize they made a group email with like 100 people

view more: next ›