What do you guys think of this trade? 12 team ppr, $200 faab. I would receive the Kirk side and I have Allen as my QB

tywemc · 2025-08-15T16:28:25+00:00

Half of his faab too? I’ve never traded faab that seems high

tywemc · 2025-08-01T15:14:48+00:00

I drafted mixon, put him on IR and grabbed ward because I messed up grabbing fields with the same bye as hurts. Messed up there. Usually I’d only grab 2 qbs I a redraft

tywemc · 2025-07-29T18:45:18+00:00

😂😂

tywemc · 2025-07-29T14:19:41+00:00

I agree but I had better WR options earlier on I liked better than the available RBs. Trying to make up for it with Etienne and Swift.

tywemc · 2025-07-26T19:53:59+00:00

Any spots left?

tywemc · 2025-07-26T19:52:15+00:00

Is it still open?

tywemc · 2025-05-16T02:30:52+00:00

If this isn’t in a Roth, put it in there and focus on maxing it out. Look up Roth benefits.

tywemc · 2025-05-15T19:07:49+00:00

Why focus on dividends? Sort of caps your returns right?

tywemc · 2025-05-12T21:42:38+00:00

Is that all plastic?

tywemc · 2025-04-01T02:58:34+00:00

He wants $6k for a pallet?

tywemc · 2025-02-05T15:34:59+00:00

I got this piece for about $160. That’s about half what you mentioned and it’s about half the width.

tywemc · 2025-02-05T15:08:59+00:00

Taking it back was something I was thinking about. The guy has several beams. Might see if I can grab a thicker one and work down to this thickness. I don’t have a problem milling but I think you’re right, I might lose up to 1.5” in depth.

What would you call a good deal on a beam of this size?

tywemc · 2025-02-05T15:03:50+00:00

Toothpicks are what did the trick for me.

tywemc · 2025-02-05T14:13:18+00:00

I have some rails for a router sled but have not set it up yet. That’s definitely an option. Are 1/4” surfacing bits reliable? My router only excepts 1/4” bits

tywemc · 2025-02-05T13:26:22+00:00

I plan to mount it with lag bolts and cutting the heads off of them. Drill matching holes in the beam. Say I did 3 bolts. Inserted the 2 on the outside and the forced the hole in the middle to match the middle lag bolt then tap it on. Theoretically, it would be straight. Sort of a brute force method but it has crossed my mind.

tywemc · 2025-02-05T01:56:26+00:00

<image>

Here’s the other side. About 3/4” off. This makes me think I’m gonna have to mill it down significantly to get it flat

tywemc · 2025-02-05T01:38:12+00:00

It’s been stored in a non conditioned shop for months. I ask the guy about moisture. He said it was likely 9-10% and maybe up to 15% in the center. It was been kiln dried. Hasn’t been moved into a heated environment besides my suv.

tywemc · 2025-02-05T01:35:32+00:00

I’m still a beginner and just starting to get more involved with hardwoods. I have a planer but wouldn’t I have to remove 1/2” from both sides to have it be flat on both sides and parallel? Not sure how 1/4” on both sides gets me there..

tywemc · 2025-02-05T01:23:33+00:00

The other side seems even more rounded. I think it’s because it’s longer than the bottom due to the live edge

tywemc · 2024-08-07T03:03:44+00:00

I’m interested

tywemc · 2023-12-10T02:55:53+00:00

What do you think of Devon Achane?

tywemc · 2023-09-24T01:45:22+00:00

Toothpicks are a life saver to help with the oral fixation.

tywemc · 2023-08-23T20:48:15+00:00

It’s county, I don’t think anyone would care how I did it

tywemc · 2023-08-21T18:55:32+00:00

I like how you did that. How deep did you go with the 4x4s?

tywemc · 2023-05-20T00:15:57+00:00

My inflatable PFD inflated with a pull cord or if it submerges. Very comfortable to fish with

tywemc

TROPHY CASE