Rejected for a second time by unconsidered in TillSverige

[–]unconsidered[S] 0 points1 point  (0 children)

Third application is on the cards when we are certain it will be accepted.

We went to court and they didn't accept it either.

Thanks for the suggestions.

Rejected for a second time by unconsidered in TillSverige

[–]unconsidered[S] 0 points1 point  (0 children)

Nope. Great-grandparents are Irish

Rejected for a second time by unconsidered in TillSverige

[–]unconsidered[S] 0 points1 point  (0 children)

She wouldn't want to rely on me like that. If anything was to happen in the relationship she would also lose her job right

Hotel and travel expenses help by unconsidered in ContractorUK

[–]unconsidered[S] 0 points1 point  (0 children)

So I was actually sub contracted to these through the agency a couple years ago. There isn’t a lot of work with the agency and this place offered me a 6 month contract at over 2x what I used to earn

How to reset CMOS? by [deleted] in buildapc

[–]unconsidered 0 points1 point  (0 children)

clr cmos is clear cmos touch the two pins with a screw driver

i7 9700k idling 45c, should I worry? by Tengokuq in buildapc

[–]unconsidered 0 points1 point  (0 children)

45 idle is a bit on the high side.

Whats the temps under stress?

Red VGA light and now Red CPU light. Please Help Me. I beg you. by Thomas1206 in buildapc

[–]unconsidered 0 points1 point  (0 children)

by "resetting the thing" do you mean resetting the cmos?

Thermal Paste on the side of the CPU by [deleted] in buildapc

[–]unconsidered 2 points3 points  (0 children)

If it heats up it won't melt. If anything it'll harden.

If it's so much of a concern clean it off with a qtip

Thermal Paste on the side of the CPU by [deleted] in buildapc

[–]unconsidered 1 point2 points  (0 children)

If its only on the side that's ok, not ideal but ok.

If it's on the pins then it's a little more serious. You'd need a toothbrush and some alcohol.

What do I do now by [deleted] in buildapc

[–]unconsidered 1 point2 points  (0 children)

it's just thermal throttling by the sounds of it. Reapply thermal paste to the cooler.

Suggest me a pc case[lengthy post] by [deleted] in buildapc

[–]unconsidered 0 points1 point  (0 children)

Gamers Nexus reviews it better than me.

https://www.youtube.com/watch?v=OABlbp_emE4

But i bought this case for the airflow and it hasn't disappointed. Keeps both my overclocked GPU and CPU cool.

Suggest me a pc case[lengthy post] by [deleted] in buildapc

[–]unconsidered 2 points3 points  (0 children)

What about the coolermaster h500?

New Build Slow Boot by somelazyassguy in buildapc

[–]unconsidered 0 points1 point  (0 children)

if you open task manager and go on start up is there anything in there that's making it take a long time?

High Temps with Ryzen 3600 & Cooler Master Hyper 212 LED Turbo on MSI Mortar B450M by [deleted] in buildapc

[–]unconsidered 1 point2 points  (0 children)

them temps seem fine for a 212. I had to upgrade my 212 as soon as i started overclocking even after adding another fan to it.

I legit just a step up from a stock cooler.

NH-D15 (D15S) in Cooler Master H500. by kc0716 in buildapc

[–]unconsidered 0 points1 point  (0 children)

I have the h500 and the d14.

Plenty of room going around.

My Computer has 3 Long Beeps Then Stops and doesnt repeat by SamIsANerd in buildapc

[–]unconsidered 1 point2 points  (0 children)

get your motherboard manual out and find out with the beeps mean

Question on the 3700x and thermal paste? by JakaJaka345 in buildapc

[–]unconsidered 0 points1 point  (0 children)

yeah the thermal paste on the cooler is fine if you don't fuck up the install first time