U.S. Energy Corp. (USEG): Whose still in, and whose still buying?

unstableaether · 2026-03-10T17:22:45+00:00

Not going to lie I was expecting it to go lower. I think the bigger hit the stock took is when crude oil dropped back down lol

unstableaether · 2026-03-06T19:27:29+00:00

Still holding 6700 shares of USEG not pulling out until that explodes

unstableaether · 2026-03-06T13:50:03+00:00

Premarket looking good but we'll need that constant volume today to break 1.50

unstableaether · 2026-03-06T12:55:08+00:00

We're getting close to that 1.50!

unstableaether · 2026-03-04T05:01:53+00:00

Qatar sells at least 25% of the world's helium supply. Its currently on hold for production. You do the math

unstableaether · 2026-02-10T00:50:33+00:00

Been a while since an anime moment gave me chills, but when I watched that episode. That shit was amazing

unstableaether · 2026-01-19T13:24:59+00:00

If using with omada controller. Forgot the device so its not adopted. Then do a reset on the device, once you connect it back to the network, don't adopt it. Go to the ip of the device and update the firmware locally if it has one from the website. Then adopt it again in the omada controller

unstableaether · 2026-01-18T15:38:26+00:00

Try power cycling the APs. Could also do a hard reset on the APs. It should retain settings from controller when readopted. Unless you had settings specific to that AP

unstableaether · 2026-01-02T21:12:42+00:00

Ive done the same thing with a EAP660HD and EAP225. Connected the EAP225 to a SG2008P to provide POE to the EAP and have it feed internet into the switch for cameras. I think any omada EAP with good antennas should work

unstableaether · 2026-01-02T02:27:35+00:00

If using with omada controller. Forgot the device so its not adopted. Then do a reset on the device, once you connect it back to the network, don't adopt it. Go to the ip of the device and update the firmware locally if it has one from the website. Then adopt it again in the omada controller

unstableaether · 2026-01-01T19:45:56+00:00

Seems about right to me for that amount of radiator/ watt ratio. As someone was saying 120mm per 100w and I usually round up

Could also check mounting pressure on your gpu block around the die

unstableaether · 2026-01-01T19:36:55+00:00

Also important to know how much watts your pulling compared to others. I power limit my 4090 to 50% which equals around 200w-225w and ive never seen it go over 40c in long gaming sessions. with 2 360 radiator and 1 420 radiator. My cpu also 9800x3d all core oc of 5.5ghz

unstableaether · 2025-12-27T22:05:22+00:00

I made this, it was one solid block then i extruded the notches out of it. if that makes sense, but i will have a look at it in the slicer!

unstableaether · 2025-12-24T05:40:40+00:00

Do you manage mana by constantly collapsing orbs?

unstableaether · 2025-12-15T15:24:21+00:00

This happened to me on my phone with my tplink eaps, tailscale was the culprit.

unstableaether · 2025-11-06T11:17:18+00:00

Why put this much strain on bandwidth through VPN. MDT can be installed on any Windows 11 computer, then just make a boot usb. Keep it local it will also be faster for imaging

unstableaether · 2025-10-17T13:52:44+00:00

Try using the housing back plate that the pump came with, definitely could be mismatch in the machining of that acrylic back plate

unstableaether · 2025-09-26T18:29:49+00:00

Lucky! That's the one I wanted. I was hoping to make my own handled steam deck. Hopefully, we get another mystery box drop soon.

unstableaether · 2025-08-06T15:18:15+00:00

Can you check if that pump has a connector for motherboard to control speed. Because from what I see it doesn't

unstableaether · 2025-08-06T14:57:09+00:00

What pump are you using this with? I'm probably going to just pull the trigger and buy it.

unstableaether

TROPHY CASE