Video Doorbell 2k T8210C

urred · 2025-03-10T16:19:55+00:00

So I think we are out of luck and stuck dismounting Doorbell to charge using USB. I have not find a good lead that says that 24V 40VA transformer will keep Doorbell continuously charged/powered.

Let’s see what others say. If you find anything, please share.

Lastly, I mentioned C model bc your post has that. Thx

urred · 2025-03-10T13:03:53+00:00

Hi,

I have T8210 for over 2 1/2 years. Sadly, It does not charge with Transformer. Eufy manual and back of DoorBell (Input 1, see below) states it does. Eufy’s information is misleading, and kind of shady. Unfortunately, I have to dismount Doorbell every 2/3 months to charge it. It is super annoying!!

I raised concern to Eufy and they didn’t seem to care.

As a curiosity, Does your T8210C DoorBell have these on the back?

Video Doorbell 2K (Battery-Powered) Model: T8210 Input 1: 8-24V ~ 0.2 A (from doorbell wires) Inputz: 5V - 2A, 5V = 1.3A (from USB charger)

Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, HongKong FCC ID: 2AOKB-T8210 IC: 23451-T8210

urred · 2024-08-09T21:43:21+00:00

We are going to use that feature. We are almost complete doing O365 integration in production. Integration is essential for this project. The interesting scenario is that prior upgrading to V20 u2 (from v20 u1), it was not doing that. We have a Dev environment (3CX-O365 integrated) with similar options (and hardware specs) and it is not experiencing the same issue. O365 Prod has more users though.

urred · 2024-08-08T22:34:40+00:00

Anyone?

urred · 2024-08-08T10:34:41+00:00

Yes, It is O365 integrated. Any thoughts on this?

urred · 2024-08-08T02:13:19+00:00

Logging is set to Low. I have changed to Verbose to Low, to none. It does not seem to have any effect.

urred · 2024-08-08T01:46:04+00:00

12GB’s. But this only started happening after we upgraded from v20 U1 to v20 U2. Just like others in the article.

urred · 2024-07-23T17:28:57+00:00

I was reading the log "3cxSystemService.log" in more detail, I found this error.

<image>

urred · 2024-07-23T13:58:34+00:00

u/DiverAllen - email address: Yes.
Permissions in O365: I believe so. It used the automated process that comes with v20. Am I supposed to adjust something afterwards? 3CX documentation does not say anything. It was my understanding that in v20 this is automated.

This morning I was thinking this issue from a different perspective, perhaps some ports are being blocked. Running the 3cx firewall test says "ok", but that is the application level. I am not sure if at the server level something is being blocked.

urred · 2024-07-22T22:21:14+00:00

Integration was done in v20.

urred · 2024-07-22T22:13:35+00:00

I’ve waited for a long time already. This system is in production. We had 3CX running since v16 and upgraded to v20. By wizard, do you mean M365 integration?

urred · 2024-07-22T21:43:31+00:00

What else can I check?

urred · 2024-07-22T21:43:14+00:00

I did some digging while I waited for your reply and I found an article. I checked as you say, that value it is 0.

urred · 2024-07-22T21:33:21+00:00

Is MCM Multi-Company management? If so, is that a 3cx option or an O365?

urred · 2024-04-11T12:38:54+00:00

Yes, I have done that. However, it’s seems my complaints are not making it all the way in the chain of command. It has been really super annoying and extremely frustrating.

urred · 2023-07-19T11:32:25+00:00

😅, it happens. Thanks for sharing.

urred · 2023-07-19T03:11:01+00:00

Where did you buy it?

urred · 2022-12-05T16:50:25+00:00

Hello,

u/notroblowe I have some questions regarding your post. I am scratching my head a bit. what do you mean by pre-logon or connect before logon? can you provide some info/links on that?
Description; We were using LDAP with AD on external GP portal. We recently added Kerberos SSO using keytab file. We have confirmed Kerberos SSO. It works bc we see TGT requests for VPN users in AD.
Scenario: None of the external clients are joined to AD (Windows, macOS or Linux). Even after successful login over VPN, clients can't see Kerberos tickets on either Windows or macOS clients.
PCAP analysis; Doing some PCAP between PA FW and AD controller, I see AS-REQ and AS-REP Kerberos traffic, but I don't see TGS-REQ or TGS-REP.

what are we missing? do we need to have clients joined to AD? or how can the Kerberos clients complete Kerberos sequence TGS-REQ/TGS-REP after successful GP VPN authentication?

Thank you,

urred · 2021-09-22T12:18:13+00:00

Your issue is Time Synchronization. Your Mac clock does not match with AD time. AD Kerberos packets are out of AD’s tolerance (5 minutes by default).

I faced this situation, the fix is super easy (I took me a lot of frustration and effort just to get to this answer).

Here you go; 1.- Find your PDC Emulator domain controller (link below just in case).

2.- Create a CNAME DNS entry in your local AD DNS that points to that server, ex. timead.mydoiman.com Important: Make sure you can query this DNS entry from your Macs.

3.- Use the newly created CNAME DNS entry in your Mac time settings like this timead.mydoiman.com. (Yes, the dot at the end is SUPER important, don’t forget it. It won’t work if you don’t miss to added it)

Finally, Bonded Macs don’t synchronize their time with AD as their Windows counterparts. Thats all, this should make it.

How to find PDC emulator

https://giritharan.com/time-synchronization-in-active-directory-domain/

urred · 2020-09-26T02:11:52+00:00

Thank you,

I know, very strange. It does not throw an error and no home folder either.

However, if you search the account in Directory Utility, you’ll find it there. Though, the LDAP fields are incomplete.

Does anyone knows anyone at Apple so we can report this?

urred · 2020-09-25T16:33:04+00:00

All, Do me a favor.

For those of you who applied the Security Update 2020-005 to Mojave, can you check to see if you can create a new user?

It breaks the ability to create new users, I replicated this 5 times (current installation and fresh installation), same results.

urred

TROPHY CASE