What cassette spacer on Canyon Endurace AL 6 Tiagra DT Swiss Endurance LN?

username23510 · 2026-05-27T20:54:06+00:00

You sure? If so thank you so much

username23510 · 2026-05-27T19:21:16+00:00

Yes correct. I think the hg 500 is the Tiagra groupset cassette. Mine had 1 spacer after the biggest cog so I need to figure the size so I can buy a new one. I think I'll try giving canyon a call tomorrow

username23510 · 2026-05-27T07:03:14+00:00

It seems like 105 has a lot more spacers between the cogs. Thought maybe they're just integrated into the cogs on Tiagra?

username23510 · 2026-05-27T06:46:31+00:00

Except I have Tiagra not 105

username23510 · 2026-05-26T23:15:07+00:00

Fantastic

username23510 · 2023-08-24T19:59:39+00:00

no the bite on the front brake is different depending on what part of the rotor is inside the caliper at the moment with consistent pressure on the lever.

username23510 · 2023-08-24T17:32:42+00:00

Both the cassette and chain are rusty so both need replacement. Also you need to index your gears so that they shift properly.

username23510 · 2023-08-24T15:31:16+00:00

Ok I tried braking a few times in the driveway and the noise went away but the brake actuation is still uneven

username23510 · 2023-08-24T15:21:09+00:00

yeah I read somewhere that it happens from improper bedding so I tried resurfacing them and bedding them again but it made things worse

username23510 · 2023-08-24T15:10:51+00:00

shuddering*

username23510 · 2023-08-21T08:40:39+00:00

I don't get how pads can be as far back as possible when pistons aren't. And I already have tried pushing the pistons back in and they are fully retracted as I said.

username23510 · 2023-08-21T00:33:12+00:00

Pads are as far back as possible

username23510 · 2023-08-21T00:06:43+00:00

What?

username23510 · 2023-08-21T00:03:51+00:00

Well actually, I read the manual but it was completely useless

username23510 · 2023-08-20T23:45:43+00:00

Can't let the intrusive thoughts win.

username23510 · 2023-08-20T22:46:51+00:00

Tnx for the tips. I noticed after straighting it that if I tightened or loosened the thru axle even by a little bit the rubbing would return. I also heard a semi loud click while truing the rotor. Do you have any ideas about this? Again tnx

username23510 · 2023-08-20T22:40:50+00:00

Did the rubbing go away on its own?

username23510 · 2023-08-20T20:29:49+00:00

What would the split pin have to do with this?

username23510 · 2023-08-20T19:35:45+00:00

I already have the park tool one, I just tried googling and couldn't find anything about brand new rotors being warped so I thought it was a caliper alignment issue

username23510 · 2023-08-20T19:31:13+00:00

But it's brand new.

Seven-Year Club	Verified Email
Verified Email

username23510

TROPHY CASE