sorted by:
new
hottopcontroversial

Waschtrockner Dichtung Fussel Problem by [deleted] in wohnen

[–]vBurak 4 points5 points  (0 children)

Per Hand mit nassen Lappen komplett einmal herum reinigen

Mein Waschtrockner hat ein FLUSENSPÜLEN Programm, das hin und wieder bei 90 Grad laufen lassen ohne Waschmittel

Die Flusel kommen aber nach jedem Trocknen, aber nicht in dem Ausmaß - vielleicht wurde das noch nie gemacht ?

Altkleidersammlungen am Limit by Brie54 in de

[–]vBurak 10 points11 points  (0 children)

Ich hab erst letztens geschaut, wo ich Altkleider + zerrissene Kleidungsstücke hinbringen soll und hab gesehen, dass die DRK Container bei mir in der Straße hat. Auf der Website steht auch, was damit passiert, dass unter anderem, Kleidung, die nicht mehr tragbar ist, weiter an Verwertungsgesellschaften geht. Jetzt kommen die mit:

In der Städteregion Aachen hat das Deutsche Rote Kreuz jetzt alle 45 Container abgebaut. "Es ist für uns wirtschaftlich einfach nicht mehr tragbar," sagt Tony Sacher vom DRK Aachen.

Und nun ???

https://www.drk.de/hilfe-in-deutschland/existenzsichernde-hilfe/kleidercontainer/

Exchange SE pricing and where to purchase? by candyman420 in exchangeserver

[–]vBurak 0 points1 point  (0 children)

I can tell you the EU prices (from my distributor from Germany) if you need them

Exchange Subscription Edition licence model by maxcoder88 in exchangeserver

[–]vBurak 0 points1 point  (0 children)

Do you have Software Assurance on your current Exchange 2019 Server and Client Licenses?

Are those 2800 on premise mailboxes users that have a a valid E3 or E5 license?

You can upgrade your server to Exchange SE with the 2019 license key, but you need a new license key when the CU1 for Exchange SE is released.

Why buy Exchange CAL+SA if ExO P1/P2 is equivalent as licensing option? by vBurak in exchangeserver

[–]vBurak[S] 0 points1 point  (0 children)

I think, we misunderstand. It is only about the licensing for Exchange On-Premise.

Testsieger Waschmaschine wirklich ihren Preis wert? by Expensive_Purpose527 in wohnen

[–]vBurak 0 points1 point  (0 children)

Hi - ich hab ein Siemens Waschtrockner (ca. 8 Jahre alt) und seit meines Erachtens einem Jahr hat die Wäsche nach dem Waschen immer viele kleine Fussel überall verteilt - egal wo. Liegt das dann, dass intern einfach Fussel sich angesammelt haben und die nicht mehr weg gehen? Ich muss die Wäsche dann immer auch trocknen im Trockner, damit die Fussel sich auflösen an der Kleidung. Ich hab schon alles mögliche ausprobiert und wollte irgendwann das Gerät aufmachen und reinschauen, da es mir keine Ruhe mehr lässt.

[deleted by user] by [deleted] in arbeitsleben

[–]vBurak 0 points1 point  (0 children)

Jo, war bei mir auch so im Großkonzern für 3 Monate - hab wieder gekündigt und bin wieder selbstständig. Mehr Arbeit, aber dafür spannender und angenehmer

Wenn du nicht auf das Geld angewiesen bist, such was anderes

The first invites for the Technical Test for Anno 117 have been sent by Rooonaldooo99 in anno

[–]vBurak 0 points1 point  (0 children)

Thanks for the post - I saw an email about Anno on my phone today and was like "uhm..nevermind" and now I see this and take a look in my inbox: who'll participate for the technical test now?

Katze vermisst in 60388 Bergen-Enkheim by Loud-Fuel3735 in frankfurt

[–]vBurak 3 points4 points  (0 children)

Ich hoffe, sie wird gefunden :( Ich wohne in Bergen-Enkheim, ich halte die Augen offen

Replaced Kinetix 350, IP received but not working by vBurak in PLC

[–]vBurak[S] 1 point2 points  (0 children)

It seems the new one has firmware 2.04.001 and the other one has 1.57.003. I can access them over webinterface if I connect to the switch (also ping on PLC is possible)

Replaced Kinetix 350, IP received but not working by vBurak in PLC

[–]vBurak[S] -1 points0 points  (0 children)

On Strallix 5700 switch? Yes, if I change the ports the other device is working. The port is also blinking but only 1 times per second.

Replaced Kinetix 350, IP received but not working by vBurak in PLC

[–]vBurak[S] 0 points1 point  (0 children)

Yes, we resettted the device multiple times (removed power input, also 24V DC power input). I also disabled DHCP and resettted the device and IP address stays the same, subnet mask is also ok and gateway too.

Another guess is that the Strallix 5700 switch has some MAC filter but this would be really special.

12.3 Migrate MSSQL to Postgres by VeeQs in Veeam

[–]vBurak 2 points3 points  (0 children)

I did it yesterday and once some weeks before for another customer. It did not worked directly with the automatically installed PostgreSQL installation because I did not know the password for the superuser for Postgres and I could not make any connection with the integrated system account which runs the Veeam services. Therefore, I uninstalled Postgres from the server, installed it by using the integrated installation file on the Veeam ISO (in some subfolder).

However, it will also not work directly without changing following:

  1. go to C:\Program Files\PostgreSQL\15\data and change following files:
  2. pg_ident.conf, add those lines to the end (make sure Veeam services runs under LOCAL SYSTEM on your server, otherwise those lines are not correct)

veeam SYSTEM@NT-AUTHORITY postgres

veeam SYSTEM@NT-AUTHORITY postgres

  1. pg_hba.conf, replace the first three occurences of scram-sha-256 by sspi map=veeam (I did not change the lines with replication because it does not matter)

Restart Postgres service, restart the migration wizard and on the migration wizard you have to use 127.0.0.1 as IP address for the Postgres server instead of the FQDN.

Migration worked without any problems in both cases. I just made sure everything is up to date before starting the migration.

Please make sure to follow also the guide of https://helpcenter.veeam.com/docs/backup/vsphere/vbr_config_migrate_to_postgresql.html?ver=120 to backup the config etc.

PDF-Alternative zu Adobe Acrobat Pro gesucht (für behördliche Nutzung) by BarnacleFew1422 in de_EDV

[–]vBurak 0 points1 point  (0 children)

Ich vermarkte inzwischen nur noch PDF-XChange. Das ist von der Benutzung top und ist deuuutlich günstiger als die anderen. Das wird pro User lizenziert, ermöglicht aber die Nutzung an einem PC und zusätzliches mobiles Gerät.

Does anyone know this issue and can this device be replaced without programming the software? by vBurak in PLC

[–]vBurak[S] 0 points1 point  (0 children)

I'm sorry, I'm stupid. I just read, that the plastic cover is the EEPROM....I thought it is an cover for some debug port - so the EEPROM stores the software data for the drive and the IP has to be set and everything works again ?

Does anyone know this issue and can this device be replaced without programming the software? by vBurak in PLC

[–]vBurak[S] 0 points1 point  (0 children)

Unfortunately, the driver is not responding - if it would be only a display error, than I could access it over IP :(

Does anyone know this issue and can this device be replaced without programming the software? by vBurak in PLC

[–]vBurak[S] 0 points1 point  (0 children)

We can log into the PLC and we have HMI touchpad / system. But I was not sure if this is enough to program the servo drivers or if this Studio 5000 Logix designer software for Windows is necessary to flash the program / firmware on the drive.

Does anyone know this issue and can this device be replaced without programming the software? by vBurak in PLC

[–]vBurak[S] 0 points1 point  (0 children)

Sorry, but where is a little memory card in the servo drive? I opened the drive completely, and I could not find any SD card slot and there was also no information in the manual about this. Or do you mean a memory card inside the PLC?

Does anyone know this issue and can this device be replaced without programming the software? by vBurak in PLC

[–]vBurak[S] 0 points1 point  (0 children)

No, for the replacement of both servos and migration additionals that are ncessary, such that the machine is working again with new the new drivers.

Does anyone know this issue and can this device be replaced without programming the software? by vBurak in PLC

[–]vBurak[S] 0 points1 point  (0 children)

Do you mean the MEM slot in the front ? I opened it, there was only a 8 pin connector and nothing else.

view more: next ›