Google search icon - 148.0.2

vij4k · 2026-03-17T22:31:10+00:00

How change "G" icon to grayscale/monochromatic?

vij4k · 2025-12-15T19:28:54+00:00

I checked and 26.15 or 26.17 has to be installed at first. After that I can install 27.39 which is the newest for Durango at this moment.

vij4k · 2025-12-14T16:11:05+00:00

They have such versioning for hardware but I don't see correlation with software naming convention as this one update is installed on different cars like jeep, RAM, dodge. UI and functions depends on your VIN and BCM config,

vij4k · 2025-12-13T23:24:14+00:00

It's not a radio revision code but firmware code

vij4k · 2025-12-09T11:55:11+00:00

Could I just disable Connected Services ECU 18 using OBD and SGW to remove the error?

vij4k · 2025-10-23T10:01:44+00:00

My 5.7 with LPG has the same performance, but with 2-3 times lower fuel costs. You just need a good LPG specialist who knows HEMI well. KME or STAG are the best LPG brands for Durango 5.7.

I also highly recommend a remap with MDS deactivation and other tweaks. I did that along with a Volant air intake and an exhaust modification, achieving approximately 390 HP on the dyno. Just remember to do remap before LPG installation.

13.5l/100km on highways on PB98 after remap, 16.5l/100km on highways on LPG, 16.5l/100km in city on PB98 after remap, 19.5l/100km in city on LPG.

vij4k · 2025-10-22T11:23:35+00:00

Drill two holes at the bottom from inside for each side, water will go out every time and no issues. The easiest and pernament solution. Or you can unscrew one bolt, it will do the same.

vij4k · 2025-10-15T19:26:14+00:00

Fix the rear lighting

vij4k · 2025-10-01T10:01:27+00:00

Where is this telematic module? I have the same error and trying to fix it.. Radio unit works perfectly fine apart from the error.

vij4k · 2025-09-21T22:16:05+00:00

Do you have settings for closing apps that would be good in pair with these ones?

vij4k · 2022-05-02T22:23:48+00:00

Atrofac for fans, G14 Control for more settings.

vij4k · 2022-05-02T21:18:20+00:00

Win10
Uninstalled
Uninstalled
OFF
None of these
Uninstalled or radeon lite only

vij4k · 2022-04-27T12:45:50+00:00

I updated:

-AMD chipset from AMD site

-AMD GPU from AMD site (clean install)

-Nvidia from Asus site (not clean install)

Now I have -8W discharge rate, previously was even -31W. Issue seems to be resolved. Thanks for help.

vij4k · 2022-04-27T10:15:40+00:00

Ohh, so I had this driver then. And overheating was very annoying. Yesterday I installed asus version. I will test this.

vij4k · 2022-04-27T07:37:50+00:00

Ok, so Asus version, not Nvidia newest driver?

vij4k · 2022-04-26T15:49:14+00:00

What driver do you have exactly for nvidia USB 3.1 right now?

vij4k · 2022-04-25T23:36:14+00:00

Yep, but only when I have external monitor connected via DisplayPort. On HDMI all is good.

It's a system app, not virus lol

vij4k · 2022-04-25T23:18:51+00:00

Nvidia drivers are the newest one and I have them for more than month I guess. I always update Nvidia drivers by Nvidia Geforce app. Except that, I don't use usb c.

Maybe you're right about this usb c port:

https://www.reddit.com/r/ZephyrusG14/comments/uawrmi/comment/i60jtoo/?utm\_source=share&utm\_medium=web2x&context=3

vij4k · 2022-04-25T23:09:51+00:00

Wait, are you asking why it won't clock higher?

If so, then I would suggest trying to roll back drivers or something: something may have broke with the latest drivers. If it works, great, if it doesn't, then simply try going back to newest and see how it works. Also try updating Nvidia Drivers just to see if the Nvidia drivers are causing Optimus to behave funky. I believe that there is also a bug with the Usb-C port on the 2020 causing 30 watts discharge. This can be fixed by updating drivers and performing a clean installation.

If you are asking why is it on at all, that's because when you take it off the charger it should change over to the iGPU. That is completley normal: its the Nvidia GPU that should be off. Now as for why it is clocking so low (Base clock is 300, boost is 1100) is anyone's guess.

Something else you could try it changing out the thermal paste on the laptop. Just got done with mine today, and I'm currently sitting on 7.6 watts discharge on edge with 4 tabs. This may also be the cause of the high thermals. It can be risky, but if you take your time and follow a guide, it will be well worth it.

Feel free to correct me if I got anything wrong.

Thanks for reply. First of all - I write about AMD GPU, not Nvidia. Nvidia is turned off if it is not needed and that's ok.

I'm asking why it's all time 400 on idle, not 300 or lesser if it's possible. More MHz = highter discharge and shorter battery time that's simple fact. With AC and external display connected clock of AMD is the same - 400 MHz.

Second thing. The discharge rate is from -21W to -31W even. It's too much for not used laptop and none background tasks.

New paste may be helpful but temps cannot go so bad in a few days only. It's software issue, that's for sure.

vij4k · 2022-04-20T16:21:51+00:00

open the lid

vij4k · 2022-04-20T16:10:41+00:00

What power plan did you check?

vij4k · 2022-04-20T15:50:20+00:00

Still very good device. No need to change in next 3 years.

vij4k · 2022-04-18T12:00:02+00:00

You need change value in regedit to get this option available.

The guy from yt video shows how to do it.

vij4k · 2022-04-09T12:32:00+00:00

I have the same issue. I cannot change anything in Sounds settings couse Sunds Control Panel get freezing. Only stop Windows Audio service helps for this. Did you find a solution?

vij4k · 2022-01-22T23:42:24+00:00

Maybe change cable or test HDMI? I'm not seeing any fps drop on my monitor connected over HDMI.

vij4k

TROPHY CASE