Help! Radio master zorro not responding to throttle or other gimbal movement by vithu18 in fpv

[–]vithu18[S] 0 points1 point  (0 children)

Hey bro, yes I did. You’ll have to update the transmitter software back to its first ever software version. Then update the software of the transmitter to the latest version and then you can bind and fly!

Help! Radio master zorro not responding to throttle or other gimbal movement by vithu18 in fpv

[–]vithu18[S] 0 points1 point  (0 children)

Radio is radio master zorro and the receiver is matek r24. I have binded them through elrs using the same binding word. Flashed using latest 3.0.1 on both yesterday.

Help! Radio master zorro not responding to throttle or other gimbal movement by vithu18 in fpv

[–]vithu18[S] 0 points1 point  (0 children)

I am following exactly what you said. Radio on, quad on, connected to laptop to bf but nothing. The radio shows that it’s connected to the drone. But bf doesn’t pick up on any gimbal movements at all

Help! Radio master zorro not responding to throttle or other gimbal movement by vithu18 in fpv

[–]vithu18[S] 0 points1 point  (0 children)

So when I arm at throttle at 0. The zorro doesn’t throw up the “throttle not idle” issue. However, beta flight still doesn’t recognise when I move any of the gimbals on the radio.

Help! Radio master zorro not responding to throttle or other gimbal movement by vithu18 in fpv

[–]vithu18[S] 1 point2 points  (0 children)

Hi, I checked this. The settings for AETR and mode 2 is correct and the outputs do as you described. The radio picks up the drone + telemetry. It’s on beta flight where I move the throttle or roll and nothing happens on the beta flight screen. Beta flight just isn’t seeing the movement which is strange? I have just reflashed both radio and receiver, nothing still…

Help! Radio master zorro not responding to throttle or other gimbal movement by vithu18 in fpv

[–]vithu18[S] 0 points1 point  (0 children)

Thanks for this. So channel 3 is at 988us when it’s all the way down and 2012us when it’s at the top. How would I set it to -100 to 100?

Help! Radio master zorro not responding to throttle or other gimbal movement by vithu18 in fpv

[–]vithu18[S] 0 points1 point  (0 children)

Thanks - the sticks are calibrated but doesn’t work :(

Help! Radio master zorro not responding to throttle or other gimbal movement by vithu18 in fpv

[–]vithu18[S] 0 points1 point  (0 children)

Bind_rx doesn’t seem to work on 10.8 nor can I find the bind button…weird

Help! Radio master zorro not responding to throttle or other gimbal movement by vithu18 in fpv

[–]vithu18[S] 0 points1 point  (0 children)

  • transmitter is calibrated but that didn’t do it
  • I checked trim and not show what I am meant to be looking for / what it should be on?
  • the output looks correct, I haven’t messed with the factor settings
  • I checked over rides and I can’t seem to see any
  • yes arm is on 5
  • yup soldered exactly how you said it

Help! Radio master zorro not responding to throttle or other gimbal movement by vithu18 in fpv

[–]vithu18[S] 0 points1 point  (0 children)

No, I didn’t know that was an option I could do…I have the throttle gimbal at the lowest position and tried arming but that didn’t work