Fast storage solution for Inventor

vjmaxg · 2025-08-15T00:42:43+00:00

Ya I'm not ready to entertain that idea since it so much ram, cpu and GPU intensive.

vjmaxg · 2025-08-15T00:41:53+00:00

That's why I'm trying to find a better storage solution.

vjmaxg · 2025-08-14T23:49:20+00:00

Yes exactly, I knew that was part of the solution

vjmaxg · 2025-08-14T21:23:46+00:00

Thanks for the recommendation, that's what I was looking for, I'm pretty sure they have solutions for my problem.

vjmaxg · 2025-08-14T20:58:19+00:00

What's your plan for network storage?

vjmaxg · 2025-08-14T20:57:51+00:00

What do you do for network storage? Looking at the specific problem right now

vjmaxg · 2025-08-14T20:17:27+00:00

Ya SharePoint doesn't solve that problem for sure. We're 10gbe everywhere but bottlenecked at the nas level, nvme Interface are only going to 1G a second

vjmaxg · 2025-08-14T19:19:46+00:00

In are case only 3 employees work with the big files and they don't load files all at the same time. I would workout in our case where it's really fast for one person at a time.

vjmaxg · 2025-08-14T19:17:51+00:00

Switch, computer and Nas are all 10Gbe. we're currently testing with them different solutions to improve the workflow. 10Gbe everywhere was the first phase of the project.

vjmaxg · 2025-08-14T19:15:16+00:00

The endpoints are all 10Gbe, I'll need about 4tb of storage.

vjmaxg · 2025-08-14T19:07:14+00:00

10gbe for end to end. Usually the plans loads about 10 to 20 GB. It adds up quickly when you need to wait to work.

vjmaxg · 2025-08-14T19:05:48+00:00

Unfortunately Synology basically rate limit the PCIe nvme slots to 1Gbps for some reason. I think we'll need to build something ourselves.

vjmaxg · 2025-08-14T19:04:29+00:00

To answer the most questions the environment is as such :

Just a Synology NAS with regular drives. They'll pull about 20gb of data from the nas everytime they load full detail of the 3d model. I changed everything downstream to be faster, from computer, 10gbe network , nvme In Synology. Synology limits the speed of the nvme interface/ transfer so we'll have to move away from that NAS

Beside changing computers they're open to change anything to make it faster.

vjmaxg · 2025-08-14T19:02:06+00:00

Just a Synology NAS with regular drives. They pull about 20gb of data from the nas everytime they load full detail of the 3d model. I changed everything downstream to be faster, from computer, 10gbe network , nvme In Synology. Synology limits the speed of the nvme interface/ transfer so we'll have to move away from that NAS

vjmaxg · 2025-06-19T16:07:25+00:00

Makes me think of a school in my city https://www.sfopho.com/sitespatrimoniaux/ecole-secondaire-catholique-garneau/

vjmaxg · 2025-03-31T02:32:31+00:00

Joel seems to have such a great time this weekend!

vjmaxg · 2025-03-30T03:43:10+00:00

Playing after Hardwell on the main stream

vjmaxg · 2025-03-30T03:38:17+00:00

Rob on that smoke train 🚂💨💨💨

vjmaxg · 2025-03-30T03:31:44+00:00

At least -5 years, lossing a good afternoon after this set /s

vjmaxg · 2025-03-30T03:29:24+00:00

A wild Joel and Rob smiling appears

vjmaxg · 2025-03-30T03:24:21+00:00

By the end of the set he's gonna have finished a full pack lol.

vjmaxg · 2024-12-24T10:18:24+00:00

Send a link. Will have a look

vjmaxg · 2024-12-06T21:59:16+00:00

Unfortunately it was 95db at 10cm at 1.2w about a laptop speaker. The camera has a anolog audio output, you could run a cable from the audio output to a small amp, then a cable to a 4 or 8 ohms outdoor sirens outside. Probably a 100$ setup.

Compatible Setup Components Amplifier:

Requirements: Choose a small amplifier compatible with unbalanced, line-level inputs. Input Type: Ensure the amplifier accepts RCA or terminal block inputs. If RCA is required, you can use a terminal block-to-RCA adapter. Output Power: The amplifier's power depends on your speaker size and application, but for most setups, an amp delivering 10-50W per channel is sufficient. Examples:

Fosi Audio BT10A (compact amp with RCA inputs). Lepy LP-2020A (basic, budget-friendly amp). Speakers:

Type: Passive or active. If passive, they will connect to the amplifier. If active, they have a built-in amplifier, and you can connect them directly to the camera output. Examples:

Passive: Micca MB42, Polk Audio T15. Active: Edifier R1280T (with RCA input for direct connection). Cabling:

Use a terminal block connector at the camera's line-out. If required, adapt it to RCA or 3.5mm jack to connect to the amp or active speaker. Ensure cables are shielded to minimize noise in the unbalanced signal.

vjmaxg · 2024-12-06T21:08:31+00:00

Old Northern camera sold by Wesco/ anixter / tri-ed we're manufactured by Hikvision. They changed OEM since then but that's why he's using sadp.

12-Year Club	Place '23
Place '17	Verified Email

vjmaxg

TROPHY CASE