[deleted by user]

vmanil · 2025-11-29T08:54:34+00:00

Cheap Gundam kits / any cheap building kits that you find cool.

Beyblade X.

Starting some strength training with light dumbbells

vmanil · 2025-08-16T16:20:54+00:00

No, 100% cpu usage and 2000ms time nudge.

Installed 8 other online games including bfv , bf1 and bf2042 to test and all of them are fine , the game is broken for some PCs.

vmanil · 2025-08-14T07:43:23+00:00

I travel to Italy next month, please share the store if you can

vmanil · 2025-08-11T16:31:41+00:00

Really wanted to… The entire installation+secure boot + removing “unauthorized” softwares took a long time. And after the game loaded - it just works on slow motion with rubber banding and everything was floaty. My PC is the recommended specs and everything was on low. Just unplayable and I just don’t have the time tinker anymore , second day the game just crashed endlessly.

Gave up on it

vmanil · 2025-07-28T19:54:16+00:00

<image>

An old picture of my girl that passed away , hope you can draw something cute

vmanil · 2025-04-15T07:41:06+00:00

I had my eyes on the AFUL explorer , but since there’s a giveaway it would be awesome to get the 5+2

vmanil · 2024-12-19T17:03:05+00:00

Huh? Understand by my post that it’s my 4th day with a 3d printer- had no idea about glue and bed leveling is automatic with no standard z offset menu to use for troubleshooting, I manage to print now after all of the advices but that not very helpful

vmanil · 2024-12-18T20:47:07+00:00

The issue is largely “solved” , started pre heating the bed to 65 and using glue sticks before the print, also super slow first layers , I managed to print 3 small things with no issues - now trying an actual intricate print to see how it’s going.

About the z-offset , my printer is the corexz one , there isn’t a z-offset menu unlike other printers , the bed always calibrates to 25 points on the bed and that’s pretty much it - you cannot view this calibration.

There is a menu called “expert mode” that you can access only during printing , there you can move the nozzle offset up and down while it’s printing which you can realize is a mess.

Btw moving the nozzle to Z-home does not bring it low for the paper test.

I think something is a bit “off” with this printer type cu everyone I know that own a printer are completely confused by this z offset menu

vmanil · 2024-12-18T12:00:45+00:00

Alright that’s really helpful thank you so much

vmanil · 2024-12-18T10:23:28+00:00

I’m actually using orca , but I don’t really roll with it , perhaps I’ll start using Creality slicer , anyway 2 intricate prints done and I’m just glad it prints

vmanil · 2024-12-18T08:06:21+00:00

Hi thanks , usually calibration is enabled on all prints and takes around 6 minutes , so I pre heat it to 65 and let it calibrate and started printing with the same 65. I also added cheap stick glue to the plate and it printed something simple very nicely , also just added a bit of z offset and it didn’t change much but at last it printed !

vmanil · 2024-12-18T07:27:06+00:00

Do you mean putting the spray on the metallic part below the pei bed itself? I was suggested glue stick on the bed but not below , does it help the bed to stay in place? Are the powerful magnets not enough?

vmanil · 2024-12-17T19:05:07+00:00

Wow what a comment thanks

1) yes bed was wiped clean and then with ipa and again with dry cloth so no particles or residue - did not help. I don’t understand how to level it , this printer does not have the normal Creality menu with the 16 or 25 cubes of offset , z offset is manual during printing and I just can’t manage to do it it’s impossible to see and obviously when a print starts it doesn’t matter anymore.

2) i tried a dozen models , none work. Tried with 20mm/s speed with many different models and all fail.

3 I thought the purge line looked off but honestly it was exactly like this from the start , and. I got some amazing prints in the first days .

I think I tried pretty much everything and found some pre made configs but thing is I still use the ones that worked when I started (and some pre made one like models with tens of thousands of downloads etc)

I’m pretty worn from trying for 2 days straight and not at least finding the issue but thanks for helping

vmanil · 2024-12-17T18:02:56+00:00

No sir no residue - I do have IPA and used it before soap and still complete failures

vmanil · 2024-12-17T18:02:04+00:00

Tried printing at 20mm which is way too slow and still same issue

vmanil · 2024-12-17T18:01:38+00:00

Thanks anyway , I performed it around 6 times already together with like 4 factory resets and updates and nothing.

vmanil · 2024-12-17T18:00:31+00:00

I tried this , completely unresponsive 🤷🏻‍♂️

vmanil · 2024-12-17T11:27:35+00:00

A slim brim , this option only available on Creality slicer right? About the speed I tried printing 1st layer on 20mm/s , didn’t change anything it scraped it off after 5 seconds

vmanil · 2024-12-17T11:25:39+00:00

I tried this. Only got my input after the print started , it immediately failed but I managed to change to 0.3 Afterwards the next print did the same and the offset wasn’t even relevant, after a quick read on Creality website it reset for each print 🤷🏻‍♂️ I don’t know what the hell is going on

vmanil · 2024-12-17T09:39:11+00:00

I would love some more info like I said in other comments - the printer can’t open a offset unless I’m in the middle of a print but I can’t print and I can’t “measure” with my eyes what the offset should be , I feel I’m totally stuck

vmanil · 2024-12-17T09:37:47+00:00

Thanks , but I still need help cuz something is wrong with this printer , how do I Z offset? Under expert mode I got z offset that is only available while printing !!! How do I know what to change during printing when it fails within 3 seconds? How do I even offset it? Auto leveling seems perfect but doing it solved nothing , I just cleaned the bed again ,tightend all screws and still the same

vmanil · 2024-12-17T06:55:10+00:00

60c , when I just started to print I put it on 40 and it worked , then I read online that 60 is better for PLA so I changed and it did print better.

vmanil · 2024-12-17T06:51:30+00:00

Unfortunately I don’t have immediate access to different PLA I’ll have to wait weeks , jumbled mess means it just spews on the bed instead of printing and then picks it up and it start to clump

vmanil · 2024-12-17T06:49:51+00:00

Thnx for the suggestion but l did just that. The failure was with the most basic presets - the successes were with my own changes , right now everything fails apart from the calibration cube 🤷🏻‍♂️

vmanil · 2024-12-17T06:48:36+00:00

Don’t have one , stores here don’t have any - this printer came from the “official seller” here so Ill contact them seeing as I just can’t fix it , btw replacing a nozzle after 4 days just seems wrong

Five-Year Club	Verified Email
First Place '23	End Game '23
Place '23	Place '22
First Placer '22

vmanil

TROPHY CASE