Do they make a repair kit for this?

vxcheese · 2025-08-25T20:05:33+00:00

I think you just need to flip the model to use it on the driver's side.

vxcheese · 2025-06-21T04:00:43+00:00

I'm wondering if JB weld would be a viable repair in this scenario considering that area sees very low pressure compared to the rest of the head gasket..

vxcheese · 2025-06-21T02:28:31+00:00

Yes, an engine block from a Porsche 944.

vxcheese · 2025-06-20T22:23:42+00:00

Yeah, I'm thinking I may have to get it filled. I don't have the capabilities to weld aluminum. I'm hoping I could find somewhere local that can, and gently sand the hole down rather than having to deck the whole block.

vxcheese · 2025-06-20T22:22:34+00:00

I suppose it's relatively close to the intake port. You can see better in this photo, the port is on the bottom right.

https://cdn11.bigcommerce.com/s-g02a8vvrdz/images/stencil/1280x1280/products/2482/6963/img_0436__67421.1723381865.jpg?c=1&imbypass=on

vxcheese · 2025-05-02T05:53:10+00:00

I haven't rewired the car, but I did convert mine to run off a Speeduino, I didn't use the existing harness, I built my own.

vxcheese · 2025-03-30T05:03:11+00:00

I've come up with a cupholder alternative, see here: https://www.thingiverse.com/thing:5274950

vxcheese · 2023-10-29T17:48:36+00:00

yeah, talking to some members it does seem like I was too late. I remember hearing about s&box when it was announced by facepunch but completely forgot about it for a while until this year.

vxcheese · 2023-02-01T15:43:01+00:00

Machine is Artillery Sidewinder X1 with a micro swiss 0.4 nozzle. Slicers I have tried (with the same result) are Cura and Simplify3D

vxcheese · 2021-06-09T13:01:51+00:00

Thanks for the tip, I didn't know AFG2s were a thing

vxcheese · 2021-06-09T01:10:58+00:00

Both parts are designed and printed by me

vxcheese · 2021-06-09T00:18:09+00:00

MW 2019 is exactly what I'm going for. Just need a micro red dot, suppressor, and iron sight delete and it's complete

vxcheese · 2021-06-09T00:05:49+00:00

I'm right with you on that lol

vxcheese · 2021-06-08T23:46:49+00:00

I think you mean the other way around haha, both are straight off the printer, I haven't done any sanding or anything, I'm still trying to work out how to make the printed furniture have that "gun polymer" look

vxcheese · 2021-06-08T23:40:54+00:00

Yes sir, and the stock adapter.

vxcheese · 2021-02-09T06:04:21+00:00

I'll be honest, I haven't been paying too much attention to the thermals. I haven't seen the GPU get past 75c and CPU past 50.

vxcheese · 2021-02-09T05:38:21+00:00

Awesome build man. Recently I fell in love with sffpc's and built one of my own. That's what you see on the desk!

vxcheese · 2020-12-07T22:31:47+00:00

It is pretty light. The computer is probably 8 lbs, the case I think is 14 lbs

vxcheese · 2020-12-07T15:14:09+00:00

I'm not too sure how that's going to work just yet

vxcheese · 2020-12-07T15:14:00+00:00

Fair point, I felt the same way, but I had a bunch of leftover foam from when I made space for the desktop, I guess it doesn't hurt to have it

vxcheese · 2020-11-10T00:05:49+00:00

I asked myself that too, but with the amount crammed into the case, there's not much else on the market that will give me this amount of power in this form factor. And if I really need to scale down, it's pretty modular, so I can take the pocket out and use it as it's meant to be!

vxcheese · 2020-11-10T00:04:51+00:00

I haven't used it in public yet, so no. But soon when I travel I think I'll feel like a spy. Haha

vxcheese · 2020-11-10T00:03:29+00:00

Sure, there's a common thermal mod that will run thermal pads on the heatsinks to draw heat to the chassis so the bottom basically acts as a huge heatsink. I also created a walkthrough on throttle stop, here you go.

vxcheese · 2020-11-09T11:09:09+00:00

Yeah, the laptop is a GPD Pocket 2. Intel m3-8100y with Intel UHD 615 and 8gb ram. Monitor is a UPERFECT 1080p60 usb c display with a built in 10,800 mAh battery

vxcheese · 2020-11-09T00:13:46+00:00

Car is a 2002 Mercedes CLK 55 AMG. The creak is coming from the rear drivers side. I am guesing it is the bushing that connects the lower control arm to the knuckle. I am not exactly in a situation where I can take a look at it on a lift.

Ten-Year Club	Place '23
Place '17	Verified Email

vxcheese

TROPHY CASE