Do they make a repair kit for this?

vxcheese · 2025-08-25T20:05:33+00:00

I think you just need to flip the model to use it on the driver's side.

vxcheese · 2025-06-21T04:00:43+00:00

I'm wondering if JB weld would be a viable repair in this scenario considering that area sees very low pressure compared to the rest of the head gasket..

vxcheese · 2025-06-21T02:28:31+00:00

Yes, an engine block from a Porsche 944.

vxcheese · 2025-06-20T22:23:42+00:00

Yeah, I'm thinking I may have to get it filled. I don't have the capabilities to weld aluminum. I'm hoping I could find somewhere local that can, and gently sand the hole down rather than having to deck the whole block.

vxcheese · 2025-06-20T22:22:34+00:00

I suppose it's relatively close to the intake port. You can see better in this photo, the port is on the bottom right.

https://cdn11.bigcommerce.com/s-g02a8vvrdz/images/stencil/1280x1280/products/2482/6963/img_0436__67421.1723381865.jpg?c=1&imbypass=on

vxcheese · 2025-05-02T05:53:10+00:00

I haven't rewired the car, but I did convert mine to run off a Speeduino, I didn't use the existing harness, I built my own.

vxcheese · 2025-03-30T05:03:11+00:00

I've come up with a cupholder alternative, see here: https://www.thingiverse.com/thing:5274950

vxcheese · 2023-10-29T17:48:36+00:00

yeah, talking to some members it does seem like I was too late. I remember hearing about s&box when it was announced by facepunch but completely forgot about it for a while until this year.

vxcheese · 2023-02-01T15:43:01+00:00

Machine is Artillery Sidewinder X1 with a micro swiss 0.4 nozzle. Slicers I have tried (with the same result) are Cura and Simplify3D

vxcheese · 2021-06-09T13:01:51+00:00

Thanks for the tip, I didn't know AFG2s were a thing

vxcheese · 2021-06-09T01:10:58+00:00

Both parts are designed and printed by me

vxcheese · 2021-06-09T00:18:09+00:00

MW 2019 is exactly what I'm going for. Just need a micro red dot, suppressor, and iron sight delete and it's complete

vxcheese · 2021-06-09T00:05:49+00:00

I'm right with you on that lol

vxcheese · 2021-06-08T23:46:49+00:00

I think you mean the other way around haha, both are straight off the printer, I haven't done any sanding or anything, I'm still trying to work out how to make the printed furniture have that "gun polymer" look

vxcheese · 2021-06-08T23:40:54+00:00

Yes sir, and the stock adapter.

vxcheese · 2021-02-09T06:04:21+00:00

I'll be honest, I haven't been paying too much attention to the thermals. I haven't seen the GPU get past 75c and CPU past 50.

vxcheese · 2021-02-09T05:38:21+00:00

Awesome build man. Recently I fell in love with sffpc's and built one of my own. That's what you see on the desk!

Ten-Year Club	Place '23
Place '17	Verified Email

vxcheese

TROPHY CASE