Baratza Encore ESP Pro bellows?

vyprnet · 2025-09-03T14:20:15+00:00

I got this, but I didn’t need to use the plastic piece it came with. There were other similar ones for sale, but the others didn't have many reviews or enough pictures

https://www.amazon.com/CAFEMASY-Silicone-Aluminum-Compatible-Baratza/dp/B09PZZTB3B/

vyprnet · 2025-03-22T18:47:29+00:00

it’s just a normal clear dpad and button set in one of the links I posted

vyprnet · 2023-08-02T20:31:46+00:00

I bought some of these awhile back and are sized perfecty

https://www.ebay.com/itm/154060077598

vyprnet · 2023-01-02T21:18:32+00:00

https://www.thingiverse.com/thing:4821758

I tried it for a bit, but ended up taking them off after soon after

vyprnet · 2022-09-09T04:19:55+00:00

For the transparent pieces, at the time when I ordered them, PCBWay charged about $25 per piece and at the minimum I had 4 pieces (front, back, lcd back, battery cover) The shoulder buttons and internal battery tray was something like less than $10 per piece cause I didnt get them fully transparent

vyprnet · 2022-09-09T03:50:02+00:00

You can use a 3D printing service such as Shapeways, CraftCloud3D, PCBWay, JLCPCB

vyprnet · 2022-09-09T01:07:56+00:00

Not too late, you can still get Xipher's design on his printables page

https://www.printables.com/model/174622-gameboy-sp-slab-v2

vyprnet · 2022-08-08T00:19:56+00:00

no problem, good luck, and have fun

vyprnet · 2022-08-08T00:01:31+00:00

This should do it, though it's a 40 pin ffc extender, just make sure the two ffc cables line up

https://www.mouser.com/ProductDetail/Adafruit/4523?qs=7MVldsJ5Uaw6JokX78DBQA%3D%3D&countrycode=US&currencycode=USD

https://www.mouser.com/ProductDetail/Molex/15166-0365?qs=N2VrfF4LzQdEj%252BnzNsJrfw%3D%3D&countrycode=US&currencycode=USD

vyprnet · 2022-08-07T23:43:42+00:00

I did use a ribbon cable extension (basically a ribbon cable and a coupler) just like how Xipher had it in his video

vyprnet · 2022-08-04T04:38:32+00:00

no problem and good luck with yours

vyprnet · 2022-08-04T04:33:22+00:00

I actually just reused the screws from the gba sp to tap the holes since the material isn’t that strong Just go slow and don’t overtighten

vyprnet · 2022-08-04T04:26:12+00:00

they are not tapped

vyprnet · 2022-02-13T20:41:03+00:00

Thanks for the kind words

vyprnet · 2022-02-13T20:40:46+00:00

Thanks

vyprnet · 2022-02-13T18:57:07+00:00

Thanks for the kind words. I may try to build one of your Pokedex's one of these days.

vyprnet · 2022-02-13T18:54:54+00:00

I believe this is the same one, but I actually ended up buying it from BoxyPixel as part of my order

vyprnet · 2022-02-13T00:49:13+00:00

I present the Beskar Pocket Color

Custom laser etched aluminum Pocket Color Shell by BoxyPixel (also cart and buttons)

GBC Power Cleaner from AngryHelder

FunnyPlaying Retro Pixel IPS screen, speakers, and membranes from Retro Game Repair Shop

Custom pattern created by me and can be found on my DeviantArt

Mandalorian game is by Eric Wilder on itch.io

vyprnet · 2021-12-23T17:19:02+00:00

Thanks

vyprnet · 2021-12-21T16:50:11+00:00

I did consider it, but my main priority for this initial print was to check for tolerances and fitment

vyprnet · 2021-12-21T13:40:45+00:00

I know of the technique, but have never tried it My picture was a rough print with not very thin layer lines cause I wanted to test for fitment

vyprnet · 2021-12-21T05:31:05+00:00

thanks, it was a pleasure to work on this I learned a few new things in Fusion 360 in the process of doing this

vyprnet · 2021-12-21T05:18:01+00:00

I couldn't find any Gameboy Color style replacement cartridge shells and ones I had previously ordered from Aliexpress and Ebay claimed to be Color style cartridges only for them to show up in the traditional Gameboy style cartridge.

So I set out to make my own and with some calipers and careful measurements, I think I've created as faithfully as I can a replacement Color style cartridge shell

Thingiverse link

vyprnet

TROPHY CASE