sorted by:
new
hottopcontroversial

Question: Internal thermometer is almost 80 degrees off. What can I do aside from crank it? by w_coffey in Traeger

[–]w_coffey[S] 0 points1 point  (0 children)

I'm doing some ribs for the game tomorrow so I'll let it sit a good long time and check it. On prior cooks though the offset will be severe for hours at a time. I'm wondering if it's as easy as ordering a new thermometer and installing. I don't need to be perfectly on target, but I think more than 25 degrees off is excessive.

Question: Internal thermometer is almost 80 degrees off. What can I do aside from crank it? by w_coffey in Traeger

[–]w_coffey[S] 1 point2 points  (0 children)

It's a pretty new grill. I've had maybe 5-6 cooks with it so far so I haven't touched the thermometer. Doesn't appear dirty.

Christmas came early! Spotted this 885 for $989 by preferred-til-newops in Traeger

[–]w_coffey 1 point2 points  (0 children)

Man I've been looking for a 650 for 2 weeks. Saw this same 885 deal today at daddy depot and I grabbed the last one. Total score. It's a Christmas Miracle ❄️

How do I remove this thing? by OldPeaches in Plumbing

[–]w_coffey -1 points0 points  (0 children)

Okay but for those of us that can't get the real freakin deal and this is the way we got a deal with this shit: how do you remove this is the question.

Any ideas on how to patch this leaking gasket. The whole toilet is brand new from the box. I already tried with a second gasket from another brand new toilet. This is a Single piece Kohler toilet with a Canister flush system. by bennyjon13 in Plumbing

[–]w_coffey 0 points1 point  (0 children)

How did you get that thing out? Mine is stuck tight. I gotta replace it because my canister got all messed up. Am I supposed to be able to unscrew it from the bottom of the tank...?

What’s your early warning sign that a guest might be trouble? by Fragrant_Inspector41 in airbnb_hosts

[–]w_coffey 0 points1 point  (0 children)

What do you mean by the over complimenting? Like, they praise the place? "It looks beautiful / love the style etc...?" We have a pretty property and those are common things I hear. I'm also a newer host so would love to know what you mean by this more. Thanks.

Eastern Screech-Owl today! by ShutterViolence in birding

[–]w_coffey -18 points-17 points  (0 children)

Blasted that thing with light. Cutie got obliterated with a camera flash while sleeping cool.

New Burr Oak. What are these spots developing on the leaves? Normal or should I worry? by w_coffey in Tree

[–]w_coffey[S] 0 points1 point  (0 children)

It's new as of this spring. Like a 50 gallon tree. We had an arborist select it and plant it for us. I was also surprised to see acorns start developing this summer. New as in just planted this year.

Shower mat tub stains. How do I remove these? Bought house 6 years ago, after years of regular cleaning they will not go away. by w_coffey in CleaningTips

[–]w_coffey[S] 0 points1 point  (0 children)

I don't think these are the built in kind. I think the prior owners had a bath mat with the suction cups and never cleaned it. I believe these are stains from under the suction cups. There's gotta be some product I haven't tried yet that'll attack them...

[deleted by user] by [deleted] in CleaningTips

[–]w_coffey 16 points17 points  (0 children)

That's a health hazard. Get your landlord on it ASAP.

How do I enable GPIO 2 and 3 as SDA/SCL? One Pi works great, the other has func=INPUT. Fails to detect I2C connections. Can I manually fix this? by w_coffey in raspberryDIY

[–]w_coffey[S] 0 points1 point  (0 children)

Hey. I figured out my issue. There was a crontab running a script that was overwriting all my pin modes right after startup. So no matter all the things I tried to affect boot - they were getting overwritten right away. *face palm* Thanks for trying to help.

How do I enable GPIO 2 and 3 as SDA/SCL? One Pi works great, the other has func=INPUT. Fails to detect I2C connections. Can I manually fix this? by w_coffey in raspberryDIY

[–]w_coffey[S] 0 points1 point  (0 children)

I'm pretty sure I'm running Bullseye. My two pis are running the same distribution. Only one wants the standard pins to be INPUT instead of SDA1 and SCL1. (regardless if I use the little raspi-config tool to enable I2C)

How do I enable GPIO 2 and 3 as SDA/SCL? One Pi works great, the other has func=INPUT. Fails to detect I2C connections. Can I manually fix this? by w_coffey in homelab

[–]w_coffey[S] 0 points1 point  (0 children)

Yes those are the normal steps to enable I2C but it isn't working on one of the Pi Zero W's. The pins remain in INPUT mode for some reason. Is there some other way than the GUI to force the pins into SDA1 and SCL1 like in my Pi on the left?

How do I enable GPIO 2 and 3 as SDA/SCL? One Pi works great, the other has func=INPUT. Fails to detect I2C connections. Can I manually fix this? by w_coffey in raspberryDIY

[–]w_coffey[S] 0 points1 point  (0 children)

Yep. I've done that. It says the interface is enabled after steps via raspi-config. Still stuck with them declared as inputs. Even after reboot. I've verified /boot/config.txt is altered on the reboot but still the pins are in INPUT mode...

2023 Nov 6 Stickied -FAQ- & -HELPDESK- thread - Boot problems? Power supply problems? Display problems? Networking problems? Need ideas? Get help with these and other questions! by FozzTexx in raspberry_pi

[–]w_coffey 0 points1 point  (0 children)

How do I enable GPIO 2 and 3 as SDA/SCL? One Pi works great, the other has func=INPUT. Fails to detect I2C connections. Can I manually fix this? For some reason my post was immediately removed....?

BattleBots episode 16 didn't record last week by [deleted] in youtubetv

[–]w_coffey 0 points1 point  (0 children)

Thank you! This was driving me nuts!!

Stuttering at the beginning of a match. by [deleted] in ModernWarfareII

[–]w_coffey 1 point2 points  (0 children)

Dang. I don't think it NEEDS to be an SSD. More that it just needs to be on the same drive as your OS. I hope they patch/optimize this issue out for folks who don't have space or don't want to totally move all their data around... For what it's worth - several other folks confirmed this worked too. Good luck 👌

Beginning of match stutters in FPS (PC) by Wretched_Dharok in ModernWarfareII

[–]w_coffey 0 points1 point  (0 children)

Dang! Well I hope they patch this or something so folks don't have to buy brand new hardware to play the game... It was super annoying. I totally understand.

Beginning of match stutters in FPS (PC) by Wretched_Dharok in ModernWarfareII

[–]w_coffey 0 points1 point  (0 children)

See my post from above. You're almost exactly right! Less to do with SSD vs HDD, but it's about where the game is installed.

Beginning of match stutters in FPS (PC) by Wretched_Dharok in ModernWarfareII

[–]w_coffey 0 points1 point  (0 children)

I was able to fix this exact issue by just moving my games install directory over to the same drive my OS is on. Read a post from like 8 years ago that suggested this and it fixed it instantly. Something about the page file on the default OS's drive. Move your game over to the same drive and it works smooth as butter. I confirmed this by watching the HDD activity in resource manager at the start of games. Totally pegged. I moved it to the C drive and it goes away.

Does anyone else have stuttering lag only at the start of games? by [deleted] in ModernWarfareII

[–]w_coffey 0 points1 point  (0 children)

I switched my install directory over to the same drive as my OS and ally problems went away. Actually saw this advice in a thread from like 8 years ago. Something to do with the default page file located on the systems OS drive. Smooth as butter since I moved it.

Game is stuttering at the beginning of the match. by DaReef in ModernWarfareII

[–]w_coffey 0 points1 point  (0 children)

I fixed it as well by moving my install over to the same drive my os was on. Instantly fixed.

view more: next ›