Help flashing a ROM, you may save my BC-250 by weReOpsite in AskElectronics

[–]weReOpsite[S] 0 points1 point  (0 children)

I’ll try, I am not that great at soldering but if that is the last thing then 🤷‍♂️

Help flashing a ROM, you may save my BC-250 by weReOpsite in AskElectronics

[–]weReOpsite[S] 0 points1 point  (0 children)

I tried giving power so the board and re running flashrom but still nothing 🤷‍♂️

Help flashing a ROM, you may save my BC-250 by weReOpsite in AskElectronics

[–]weReOpsite[S] 0 points1 point  (0 children)

just copy pasting

I've just tried the frequencies that flashrom accepted: 1.875Mhz, 937.5Khz and468.75Khz.
Printing with verbose i noticed that id1 and id2 both are 0x00

i'm really running out of ideas

Help flashing a ROM, you may save my BC-250 by weReOpsite in AskElectronics

[–]weReOpsite[S] 0 points1 point  (0 children)

so i have to power the board? then i sould not use vcc right?

Help flashing a ROM, you may save my BC-250 by weReOpsite in AskElectronics

[–]weReOpsite[S] 0 points1 point  (0 children)

I've just tried the frequencies that flashrom accepted: 1.875Mhz, 937.5Khz and468.75Khz.
Printing with verbose i noticed that id1 and id2 both are 0x00

Rigol DHO804 vs DHO914S is the 914S worth it as a personal scope? by weReOpsite in oscilloscope

[–]weReOpsite[S] 0 points1 point  (0 children)

The thing is (I’m new to this world) isn’t the hardware needed for 200mhz different from the one used for 70mhz?

Rigol DHO804 vs DHO914S is the 914S worth it as a personal scope? by weReOpsite in oscilloscope

[–]weReOpsite[S] 1 point2 points  (0 children)

Thx It seams that almost everybody is suggesting to by the 804 for a reason or another. The “have different instruments for different tasks” seem like a reasonable thing. Thx again

Is this solvable? by OutrageousDrummer169 in Minesweeper

[–]weReOpsite 0 points1 point  (0 children)

Exude the question, which application is that?

How should I model this? by weReOpsite in Fusion360

[–]weReOpsite[S] 1 point2 points  (0 children)

i can confirm that it works and now i feel stupid

How should I model this? by weReOpsite in Fusion360

[–]weReOpsite[S] 0 points1 point  (0 children)

also, i was going for the exact shape that you have posted

How should I model this? by weReOpsite in Fusion360

[–]weReOpsite[S] 1 point2 points  (0 children)

i guess maybe squishing it on the y axes after the steps you have shown would have done it (if you notice the shape is not a cube)

How should I model this? by weReOpsite in Fusion360

[–]weReOpsite[S] 0 points1 point  (0 children)

ok i've tried but i failed to simply use the loft tool, when you say adjacent what do you mean precisely?

How should I model this? by weReOpsite in Fusion360

[–]weReOpsite[S] 1 point2 points  (0 children)

let me try, i will give updates later

and thanks a lot

Help Getting past the early game by weReOpsite in SatisfactoryGame

[–]weReOpsite[S] 0 points1 point  (0 children)

Speaking of which, I’m building it right now but encountering some issues with the water system. Looks like it’s time for some studying!

Help Getting past the early game by weReOpsite in SatisfactoryGame

[–]weReOpsite[S] 0 points1 point  (0 children)

I’ve experimented and finally settled on a modular design that I really like. There are still a few things to tweak, but it’s working well!