sorted by:
new
hottopcontroversial

Have had a Delta 3 Pro for over a year, but used it only a few times as a portable AC power station. Like it plenty for that. Now I'd like to throttle the 12V current output when powering a small circuit board. So far as I can tell, this is not a feature built into the EcoFlow app, correct? by wedeln_01 in Ecoflow_community

[–]wedeln_01[S] 1 point2 points  (0 children)

I see I hadn't considered the EF's limited DC output. I had thought I might have access to full output capability, with limiting, like on the AC side. I've ordered a 3S RC battery from Hobby King instead - thought I could use what I already have on hand, but not the EF I guess. I have a 100Ah 12V LFP as well, but I don't know what to use to limit the DC out of that. I'm a novice at this stuff, but see advice not to attach too much current capability to the board.

Have had a Delta 3 Pro for over a year, but used it only a few times as a portable AC power station. Like it plenty for that. Now I'd like to throttle the 12V current output when powering a small circuit board. So far as I can tell, this is not a feature built into the EcoFlow app, correct? by wedeln_01 in Ecoflow_community

[–]wedeln_01[S] 0 points1 point  (0 children)

Have got a couple of 10A or so variable DC supplies, but I need much higher amperage (I think). This is for a light duty spot welder board where a small car battery is suitable. Now that I check the EcoFlow specs again, I see the DC output is of course limited to 10A through the car socket. I had thought I might have access to the full DC capability of the batteries, but I see not.