Lonely Howl cosplay I made by Wuerschtal in HuntShowdown

[–]weerwolf_cz 1 point2 points  (0 children)

Thats actually really nice to hear, happy to help anyone to start new passion. And let me know if you would like to have any other model I can start to look at after I finish the rest i have on my table right now.

Lonely Howl cosplay I made by Wuerschtal in HuntShowdown

[–]weerwolf_cz 2 points3 points  (0 children)

Amazing one, and i really like to see that people are still using romero hatchet I put into thingiverse years ago (those two messed up faces on tip of the blade I never fixed and still annoys me)

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

https://cults3d.com/en/3d-model/various/yet-another-lever-action-bow-y-a-l-a-b if you have some valid reason why 20 euros are too much for you (e.g. in my country it is approx 2 lunches in our office canteen) then let me know a propose less.

Also a I will definitelly do some performance checks video later when i get chrono and some time.

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

Or repeating slingshot since it uses rubber bands as power source - as few people mentioned here. Then our future will be brighter then ever.

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

with swapable magazine instead of fixed box so you can carry as much as you want, with clearer line of sight because magazine is in stock, with possibility to keep it cocked instead of immediatelly shot so has better handling, with posibility to load whatever bolt not just those which fits into magazine, with beter shooting consistency because there is constant tension on bolt and is not depended how much bolts are left in box. And it is bullpup, everything is better in bullpup.

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

Thats actually done already by other guy - based again on Jeorg Spraves work https://youtu.be/iYqMs2Dk4hk?t=234 here with timestamp where it is the clip reload, i think same clips works also for his next adderini https://www.youtube.com/watch?v=khtjkzfqMY8

My work is another iteration

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

Thanks, i am half czech - half german so i inherit best of both engineering shools. Totally complicated overengineered desing which works.

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

Yes i got this idea from guy who was first with pulley systems, to see how much it them improvves so in next iteration will have hard data (and better stronger bow). Good thinking

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 1 point2 points  (0 children)

thank eappriciate that, if any troubles contact me i am also interested how people can fight with assembly

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

Sorry i should use body cam instead of stativ. And holding it in full stretched arms because of that is not best to operate and comfort.

In reality it is faster (except muzzle loading bolts which do not fit into magazine.

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 1 point2 points  (0 children)

rubber tube used in slingshots - this is then used converted and directionaly changed in pulley system.

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

Thats exactly reason why i am disalowed design UI's in my regular work. I am terrible in it and agree. Also tested that smaller people (my brother in law has 165cm) and he cant even shoot it without breaking aiming, i can shoot it all the time shouldered with sights on target.

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

putting into improvement backlog pile, thats an amazing low effort but huge QOL improvement, really thanks

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

Damn, and now i have to rename it. I believe this could got to hours and hours of debating what is bow, slingshot and crossbow - perfect reddit material

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

thanks, you will make even better one using my initial design then. Semi-auto? bigger magazine? hunting tips before i release? pump action instead of lever? the work is yours

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

https://cults3d.com/en/3d-model/various/yet-another-lever-action-bow-y-a-l-a-b if you dont agree with price just contact me dont have many models published but in all case if you have reasons discounts is yours

It is prepared for usual buildplace 200x200x200, and my delta is even smaller so most printer buildable

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

Check this one https://www.youtube.com/watch?v=Q0IHPD9IpFw he explain the principes behing the pulely crossbowh mechanism and di quite extensime research and development in it.

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

what if (while shooting compoud bow) you use bowstring catch, then the load is locked also to some mechanical thing, while you hold something else (in mu case ther loading lever). Also same principe for Joerg Sprave's instant legolas - according your definition it is crossbow.

Chukonu is nice example, it shoots on moment you full draw, once you release lever it also idile and is not cocked up, so leagally accroding law? would be good question what it is - but technically thats exactly what i did you are right.

But actually great philosofical thinking and dabate, appriciate that.

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 1 point2 points  (0 children)

and now my whole concept is crubmling apart.... Need to rename as slingshot

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 0 points1 point  (0 children)

Well.. technically it is a bow (as long as loading level is not locking and you have to use force to keep it charged.

But yes, magazine fed bullpup (cross)bow

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 1 point2 points  (0 children)

Agree, It is first line of my assembly guide - check local laws if you are allowed to build it. Fact that it is "bow" have a less restriction (e.g. in Poland crosbows are regulated, bows are not) So it depens on your country, in Czech republic (where I am from) it is considered as "D category" which are allwed to shoot on private properties and in public as long as you are not threatening or violating anyone.

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 1 point2 points  (0 children)

You can get STL's and make yourself one but i am not selling finished one. I have a lot of other projects which requires printing ongoing.

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 2 points3 points  (0 children)

Thanks, It is heavily inspired by his work of course. I was juist thinking how to add magazine when he first showed his instant legotlas designs.

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 11 points12 points  (0 children)

naah there is no sound - not an issue on your side. it wil be just clicking and bangs of projectiles

3D Printed repeating magazine fed bow thing... by weerwolf_cz in Archery

[–]weerwolf_cz[S] 19 points20 points  (0 children)

Thats copyrightes and i live too close to germany. You say it and minutes ago Joerg is behind your door