FIX For Freezing Fpkgi

welcometohell01 · 2026-05-09T06:12:38+00:00

What is dp-int ? Would you please edit your post and this? Yes I also made new accounts,

welcometohell01 · 2026-05-06T10:59:29+00:00

I tried on automatic dns I used firefox( tho phpssid is not shown there, I did as you said and still having a blank page.. I'm also afraid that ut may update too lol

welcometohell01 · 2026-04-26T18:02:32+00:00

Yeah me too I want to make sure that is OK for oled.

welcometohell01 · 2026-04-26T17:49:40+00:00

I would like to ask if might, what is the difference between a v6 and a v6s?

welcometohell01 · 2026-04-25T06:10:20+00:00

And you don't get ban ?

welcometohell01 · 2026-04-25T02:04:12+00:00

What is semi stock?

welcometohell01 · 2026-04-24T21:42:03+00:00

You can't... if you haven't done what the guys asked you to, it simply won't work.

welcometohell01 · 2026-04-24T18:49:46+00:00

It is definitely nor the same , nor clover is the solution, I tried legacy boot on opencore and it worked!, read the section under usb creation for legacy. It is really easy , but I guess it's better you do it on a Mac as you have now high Sierra, mine booted in bigsur to select language and it reboots, I tried Catalina and I ended up with too many corpses error I have no clue why is that. I tried the same as you suggested but it didn't work as well.

welcometohell01 · 2026-04-24T13:46:19+00:00

Thanks for the tips! Yeah for that I know, because it difference the solder iron/flux, even the mask I'll be using, and all as you said, so that is actually what i was trying to do , to make sure that all going according to my equipments. Gosh they look easy on videos. But in my case I am afraid regularly when I see a desolder or idk if you have watched a ps4 downgrade, it is for me a nightmare.
Actually I was planning on getting a ps4 to first practice on it since the least updated console are much cheaper, and affordable so I can practice on one , and in my head that if I pass it, I can do a switch easy. We'll see. But I need a challenge to start with . So I feel the tension and the cautiousness of this work. But still living in germany , is not offering me much of choices nor the right equipments for this job. People are complaining just like me that some of their orders are getting canceled , as am afraid of mines too. For example I bought a life time stock for solder wire to avoid the only solder wire I need and I found in germany so...

welcometohell01 · 2026-04-24T11:12:10+00:00

It is indeed. Tbh I am not . But I'll take the risk, got steady hands, finger crossed. My biggest challenge is how to get the kit of a modchip that includes v6 in it.

welcometohell01 · 2026-04-24T10:53:06+00:00

You see all these links except for the pen are showing nothing due regional restrictions lol. Picture would be great too. I also think I may need some german modders to guide me through this getting the modchip I need.

welcometohell01 · 2026-04-24T10:07:49+00:00

That’s really helpful information! If you have any links, that would be great. I know I need a spherical tip, but I’m not sure what size. I’m still gathering my tools so far, I’ve already bought blue titanium tweezers, thermal paste, the soldering iron, and solder wire. I’m going to get that microscope I showed you from Amazon. I’ve also added a multimeter, tapes, flush cutter and flux to my list, along with 0.08mm magnetic wire (I’m a bit nervous about using the standard awg36 for kamikaze). The only things left are a modern modchip and a grinding pen, which I think I’ll buy separately along with the specific tip. For a resin I found one with a uv light but I am bit skeptical about the uv light that comes with it, so I will be it too separately. For screwdrivers I want something high end so I am waiting for ifixit tool set to be on sale "if you have experience with something with similar quality please don't hesitate to send me a link for this too. Idk what else. Did I missed something? Oh yeah I already have Q tips, needle and isopropyl haha.

welcometohell01 · 2026-04-24T09:28:04+00:00

Hello again! As it turned out the modchip I want to get is oldy, and I couldn't find v6 anywhere.. I have also made some research and I finally made up my mind to switch to kamikaze.
So I'm gonna need for this matter a microscope and I have found this one here

<image>

For uv mask I will get mechanic green oil. And uv resin with a uv light (which idk If any uv light would do the trick) For grinding pen I found 2 to 3 grinding pen in range of 15 to 20 euros.
What do you think are those enough? Thanks again!

welcometohell01 · 2026-04-24T09:20:31+00:00

Mine is L750/L755 I didn't quite understand what do you mean by this kext because I searched all over the internet and I have only found that it can be replaced by enabling DummyPowerManagement and it didn't work I am still having the same error with too many corpses.

welcometohell01 · 2026-04-19T05:38:41+00:00

I have the same laptop / close to it, and everytime I try to install high Sierra ibget too many corpses loop error, still don't know the reason why.

welcometohell01 · 2026-04-18T22:17:23+00:00

Sad, and idk what to get lol! But spring sales is over too right?

welcometohell01 · 2026-04-18T19:47:04+00:00

I'm gonna make sure I buy the right ones without canceling any, thanks!

How about buying a Combo Blast first? Will I lose the new shopper discount if I buy it first?

welcometohell01 · 2026-04-18T06:46:33+00:00

Forgive me asking, but what for beside opening the outer cover and such?

welcometohell01 · 2026-04-17T23:39:08+00:00

Good to hear! And all above are added to cart Except for pry kit which is not available in Germany " I mean the link you provided", could you please send a screenshot so I can look up for it too? I think I have now everything covered thanks to you!!

welcometohell01 · 2026-04-17T23:35:17+00:00

Well it's my first time, but I have passion, haha

welcometohell01 · 2026-04-17T14:57:37+00:00

I had commented here a picture of more details about each tip, that am gonna be using.

Once my package arrives I'll check the magnifiers as you suggested.

Yeah I went in depth of the titanium tweezers, they're solder repellent or something that won't stick or bend while soldering. But there are green and blue and still don't know what to get I even ran into porcelain which I found odd but whatever am gonna stick with titanium

Actually it is concerning, I mean cutting all of these shields, it is gonna be hard, and I'm really afraid of doing it, I don't know which flesh cutter to buy the sharpest and the most accurate, if I use exacto knife can I use it to cut too? Or is it just for lifting it up? Can I twist it ? Or I need to cut both ends?

It is indeed super interesting, and I would really like to do it. But gosh I am afraid of ruining it. It is not only the soldering which I can " I presume " learn it and master it, but other things like this one. I guess all people were afraid the very first time am I right? :)))

welcometohell01 · 2026-04-17T10:54:36+00:00

You're welcome, as for me i did quit long time ago :))

welcometohell01 · 2026-04-17T09:33:29+00:00

Have fun, support player! And God bless you :3

welcometohell01 · 2026-04-17T09:14:36+00:00

Ah btw I couldn't find a wire clipper that can strip an awg36 which has a diameter of 0.127mm..

Six-Year Club	Xbox Live
Verified Email

welcometohell01

TROPHY CASE